diff options
author | Wolfgang Denk <wd@pollux.(none)> | 2005-09-23 13:05:55 +0400 |
---|---|---|
committer | Wolfgang Denk <wd@pollux.(none)> | 2005-09-23 13:05:55 +0400 |
commit | 0c8721a466b5e0eca7e7fbe1007777fa82100541 (patch) | |
tree | 1f53decded27502be8593137739291a3de406d94 /doc | |
parent | a6e6cf00367c0779eadb49915e40c55f0a787957 (diff) | |
download | u-boot-0c8721a466b5e0eca7e7fbe1007777fa82100541.tar.xz |
Cleanup (PPC4xx is AMCC now)
Diffstat (limited to 'doc')
-rw-r--r-- | doc/I2C_Edge_Conditions | 2 | ||||
-rw-r--r-- | doc/README.bedbug | 4 | ||||
-rw-r--r-- | doc/README.ebony | 4 | ||||
-rw-r--r-- | doc/README.ml300 | 2 | ||||
-rw-r--r-- | doc/README.mpc85xxads | 2 | ||||
-rw-r--r-- | doc/README.ocotea | 6 | ||||
-rw-r--r-- | doc/README.ocotea-PIBS-to-U-Boot | 4 | ||||
-rw-r--r-- | doc/README.ppc440 | 2 |
8 files changed, 13 insertions, 13 deletions
diff --git a/doc/I2C_Edge_Conditions b/doc/I2C_Edge_Conditions index be7f1bee1f..44d3478549 100644 --- a/doc/I2C_Edge_Conditions +++ b/doc/I2C_Edge_Conditions @@ -28,7 +28,7 @@ I2C Edge Conditions: Notes ----- -!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A IBM 4xx BUG!!! +!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A AMCC 4xx BUG!!! This reset edge condition could possibly be present in every I2C controller and device available. For boards where a I2C bus reset diff --git a/doc/README.bedbug b/doc/README.bedbug index 56aeb090c1..9cfb4217fe 100644 --- a/doc/README.bedbug +++ b/doc/README.bedbug @@ -2,7 +2,7 @@ BEDBUG Support for U-Boot -------------------------- These changes implement the bedbug (emBEDded deBUGger) debugger in U-Boot. -A specific implementation is made for the IBM405 processor but other flavors +A specific implementation is made for the AMCC 405 processor but other flavors can be easily implemented. ##################### @@ -58,7 +58,7 @@ can be easily implemented. routines are common to all PowerPC processors. ./cpu/ppc4xx/bedbug_405.c - IBM PPC405 specific debugger routines. + AMCC PPC405 specific debugger routines. Bedbug support for the MPC860 diff --git a/doc/README.ebony b/doc/README.ebony index 6e2a8115a4..8b030dbb54 100644 --- a/doc/README.ebony +++ b/doc/README.ebony @@ -1,9 +1,9 @@ - IBM Ebony Board + AMCC Ebony Board Last Update: September 12, 2002 ======================================================================= -This file contains some handy info regarding U-Boot and the IBM +This file contains some handy info regarding U-Boot and the AMCC Ebony evalutation board. See the README.ppc440 for additional information. diff --git a/doc/README.ml300 b/doc/README.ml300 index c9ef6e6c81..27c5b92783 100644 --- a/doc/README.ml300 +++ b/doc/README.ml300 @@ -5,7 +5,7 @@ Xilinx ML300 platform --------------- The Xilinx ML300 board is based on the Virtex-II Pro FPGA with -integrated IBM PowerPC 405 core. The board is normally booted from +integrated AMCC PowerPC 405 core. The board is normally booted from System ACE CF. U-Boot is then run out of main memory. An FPGA is a configurable and thus very flexible device. To diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads index 08d6831fb6..f0cf782a8f 100644 --- a/doc/README.mpc85xxads +++ b/doc/README.mpc85xxads @@ -130,7 +130,7 @@ Updated 13-July-2004 Jon Loeliger include/configs/MPC8540ADS.h include/configs/MPC8560ADS.h - CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, IBM 440, etc) + CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, AMCC 440, etc) CONFIG_E500 BOOKE e500 family(Motorola) CONFIG_MPC85xx MPC8540,MPC8560 and their derivatives CONFIG_MPC8540 MPC8540 specific diff --git a/doc/README.ocotea b/doc/README.ocotea index 403735d0f3..9ac3a184cb 100644 --- a/doc/README.ocotea +++ b/doc/README.ocotea @@ -1,9 +1,9 @@ - IBM Ocotea Board + AMCC Ocotea Board Last Update: March 2, 2004 ======================================================================= -This file contains some handy info regarding U-Boot and the IBM +This file contains some handy info regarding U-Boot and the AMCC Ocotea 440gx evalutation board. See the README.ppc440 for additional information. @@ -53,7 +53,7 @@ Special note about the Cicada CIS8201: This has been done in the 440gx_enet.c file with a #ifdef/endif pair. -IBM does not store the EMAC ethernet addresses within their PIBS bootloader. +AMCC does not store the EMAC ethernet addresses within their PIBS bootloader. The addresses contained in the config header file are from my particular board and you _*should*_ change them to reflect your board either in the config file and/or in your environment variables. I found the addresses on diff --git a/doc/README.ocotea-PIBS-to-U-Boot b/doc/README.ocotea-PIBS-to-U-Boot index 0044aa0f91..25dd2a2378 100644 --- a/doc/README.ocotea-PIBS-to-U-Boot +++ b/doc/README.ocotea-PIBS-to-U-Boot @@ -75,8 +75,8 @@ powering the board you should see the following message: U-Boot 1.1.3 (Apr 5 2005 - 22:59:57) -IBM PowerPC 440 GX Rev. C -Board: IBM 440GX Evaluation Board +AMCC PowerPC 440 GX Rev. C +Board: AMCC 440GX Evaluation Board VCO: 1066 MHz CPU: 533 MHz PLB: 152 MHz diff --git a/doc/README.ppc440 b/doc/README.ppc440 index 95d63fc508..08f34f589f 100644 --- a/doc/README.ppc440 +++ b/doc/README.ppc440 @@ -12,7 +12,7 @@ and enabled via the CONFIG_440 flag. It is largely based on the 405gp code. A sample board support implementation is contained in the board/ebony directory. -All testing was performed using the IBM Ebony board using both +All testing was performed using the AMCC Ebony board using both Rev B and Rev C silicon. However, since the Rev B. silicon has extensive errata, support for Rev B. is minimal (it boots, and features such as i2c, pci, tftpboot, etc. seem to work ok). |