diff options
author | Wolfgang Denk <wd@denx.de> | 2021-09-27 18:42:39 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2021-09-30 16:08:16 +0300 |
commit | 0cf207ec01cbacae47585fcc26591dd2296507d6 (patch) | |
tree | 573cfefc2ab21a033ae98fa2afbd57f1f6528496 /doc | |
parent | 0a50b3c97b3408e52589d873d4c7b54ad365a76c (diff) | |
download | u-boot-0cf207ec01cbacae47585fcc26591dd2296507d6.tar.xz |
WS cleanup: remove SPACE(s) followed by TAB
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/README.commands.spl | 6 | ||||
-rw-r--r-- | doc/README.falcon | 4 | ||||
-rw-r--r-- | doc/README.odroid | 4 | ||||
-rw-r--r-- | doc/device-tree-bindings/mailbox/k3-secure-proxy.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/net/altera_tse.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/net/fsl,mcf-fec.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt | 14 | ||||
-rw-r--r-- | doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt | 14 | ||||
-rw-r--r-- | doc/device-tree-bindings/spi/spi-bus.txt | 14 | ||||
-rw-r--r-- | doc/device-tree-bindings/spi/spi-qup.txt | 2 | ||||
-rw-r--r-- | doc/device-tree-bindings/tpm2/sandbox.txt | 2 |
16 files changed, 38 insertions, 38 deletions
diff --git a/doc/README.commands.spl b/doc/README.commands.spl index cb3e0c8e0a..ecfd3ca9ee 100644 --- a/doc/README.commands.spl +++ b/doc/README.commands.spl @@ -17,14 +17,14 @@ TYPICAL CALL on OMAP3: nandecc hw -nand read 0x82000000 0x280000 0x400000 /* Read kernel image from NAND*/ -spl export atags /* export ATAGS */ +nand read 0x82000000 0x280000 0x400000 /* Read kernel image from NAND*/ +spl export atags /* export ATAGS */ nand erase 0x680000 0x20000 /* erase - one page */ nand write 0x80000100 0x680000 0x20000 /* write the image - one page */ call with FDT: nandecc hw -nand read 0x82000000 0x280000 0x400000 /* Read kernel image from NAND*/ +nand read 0x82000000 0x280000 0x400000 /* Read kernel image from NAND*/ tftpboot 0x80000100 devkit8000.dtb /* Read fdt */ spl export fdt 0x82000000 - 0x80000100 /* export FDT */ nand erase 0x680000 0x20000 /* erase - one page */ diff --git a/doc/README.falcon b/doc/README.falcon index 713d7063a1..88218d35b9 100644 --- a/doc/README.falcon +++ b/doc/README.falcon @@ -69,7 +69,7 @@ CONFIG_CMD_SPL_NAND_OFS Offset in NAND where the parameters area was saved. CONFIG_CMD_SPL_NOR_OFS Offset in NOR where the parameters area was saved. -CONFIG_CMD_SPL_WRITE_SIZE Size of the parameters area to be copied +CONFIG_CMD_SPL_WRITE_SIZE Size of the parameters area to be copied CONFIG_SPL_OS_BOOT Activate Falcon Mode. @@ -89,7 +89,7 @@ Environment variables A board may chose to look at the environment for decisions about falcon mode. In this case the following variables may be supported: -boot_os : Set to yes/Yes/true/True/1 to enable booting to OS, +boot_os : Set to yes/Yes/true/True/1 to enable booting to OS, any other value to fall back to U-Boot (including unset) falcon_args_file : Filename to load as the 'args' portion of falcon mode diff --git a/doc/README.odroid b/doc/README.odroid index bc77ae3175..1090a0ea14 100644 --- a/doc/README.odroid +++ b/doc/README.odroid @@ -296,8 +296,8 @@ Odroid # usb part 0 Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type - 1 3072 263168 000c4046-01 06 - 2 266240 13457408 000c4046-02 83 + 1 3072 263168 000c4046-01 06 + 2 266240 13457408 000c4046-02 83 Odroid # ls usb 0:2 /boot <DIR> 4096 . diff --git a/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt b/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt index f3add0d4e7..c25d7091bf 100644 --- a/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt +++ b/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt @@ -10,7 +10,7 @@ Secure Proxy Device Node: Required properties: -------------------- - compatible: Shall be: "ti,am654-secure-proxy" -- reg-names data - Map the data region +- reg-names data - Map the data region scfg - Map the secure configuration region rt - Map the Realtime region. - reg: Contains the register map per reg-names. diff --git a/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt b/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt index c4cf26eaa4..dd0260b394 100644 --- a/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt +++ b/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt @@ -11,7 +11,7 @@ Required properties: -------------------- - compatible: Shall be: "ti,j721e-ddrss" for j721e, j7200 "ti,am64-ddrss" for am642 -- reg-names cfg - Map the controller configuration region +- reg-names cfg - Map the controller configuration region ctrl_mmr_lp4 - Map LP4 register region in ctrl mmr - reg: Contains the register map per reg-names. - power-domains: Should contain two entries: diff --git a/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt b/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt index 4ed731c524..1e11edf7b1 100644 --- a/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt +++ b/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt @@ -14,7 +14,7 @@ DDRSS device node: Required properties: -------------------- - compatible: Shall be: "ti,am654-ddrss" -- reg-names ss - Map the sub system wrapper logic region +- reg-names ss - Map the sub system wrapper logic region ctl - Map the controller region phy - Map the PHY region - reg: Contains the register map per reg-names. diff --git a/doc/device-tree-bindings/net/altera_tse.txt b/doc/device-tree-bindings/net/altera_tse.txt index cb190df65f..96ab1d6ebc 100644 --- a/doc/device-tree-bindings/net/altera_tse.txt +++ b/doc/device-tree-bindings/net/altera_tse.txt @@ -90,7 +90,7 @@ Example: tse_sub_1_eth_tse_0: ethernet@0x1,00001000 { compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00001000 0x00000400>, + reg = <0x00000001 0x00001000 0x00000400>, <0x00000001 0x00001460 0x00000020>, <0x00000001 0x00001480 0x00000020>, <0x00000001 0x000014A0 0x00000008>, diff --git a/doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt b/doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt index e237825bac..5c6d548cae 100644 --- a/doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt +++ b/doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt @@ -21,7 +21,7 @@ Example: fec0: ethernet@9000 { compatible = "fsl,mcf-dma-fec"; - reg = <0x9000 0x800>; + reg = <0x9000 0x800>; mii-base = <0>; phy-addr = <0>; timeout-loop = <5000>; diff --git a/doc/device-tree-bindings/net/fsl,mcf-fec.txt b/doc/device-tree-bindings/net/fsl,mcf-fec.txt index 39bbaa52f3..2699b5ac07 100644 --- a/doc/device-tree-bindings/net/fsl,mcf-fec.txt +++ b/doc/device-tree-bindings/net/fsl,mcf-fec.txt @@ -15,7 +15,7 @@ Example: fec0: ethernet@fc030000 { compatible = "fsl,mcf-fec"; - reg = <0xfc030000 0x400>; + reg = <0xfc030000 0x400>; mii-base = <0>; phy-addr = <0>; timeout-loop = <5000>; diff --git a/doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt b/doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt index 2034f05993..ace66ead5c 100644 --- a/doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt +++ b/doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt @@ -2,7 +2,7 @@ Required properties for the pinctrl driver: - compatible: "brcm,bcm6838-pinctrl" -- regmap: specify the gpio test port syscon +- regmap: specify the gpio test port syscon - brcm,pins-count: the number of pin - brcm,functions-count: the number of function diff --git a/doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt b/doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt index 51f2f2c79c..0d6f861445 100644 --- a/doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt +++ b/doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt @@ -3,19 +3,19 @@ ---------------------------------------------------------------------- MPP# 0x1 0x2 0x3 0x4 ---------------------------------------------------------------------- -0 SDIO_CLK - SPI0_CLK - +0 SDIO_CLK - SPI0_CLK - 1 SDIO_CMD - SPI0_MISO - -2 SDIO_D[0] - SPI0_MOSI - -3 SDIO_D[1] - SPI0_CS0n - +2 SDIO_D[0] - SPI0_MOSI - +3 SDIO_D[1] - SPI0_CS0n - 4 SDIO_D[2] - I2C0_SDA SPI0_CS1n 5 SDIO_D[3] - I2C0_SCK - 6 SDIO_DS - - - 7 SDIO_D[4] - UART1_RXD - -8 SDIO_D[5] - UART1_TXD - -9 SDIO_D[6] - SPI0_CS1n - +8 SDIO_D[5] - UART1_TXD - +9 SDIO_D[6] - SPI0_CS1n - 10 SDIO_D[7] - - - -11 - - UART0_TXD - -12 SDIO_CARD_PW_OFF SDIO_HW_RST - - +11 - - UART0_TXD - +12 SDIO_CARD_PW_OFF SDIO_HW_RST - - 13 - - - - 14 - - - - 15 - - - - diff --git a/doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt b/doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt index 1fc1bc6645..c6984ddd60 100644 --- a/doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt +++ b/doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt @@ -11,7 +11,7 @@ Required properties for the pinctrl driver: "marvell,armada-8k-cpm-pinctrl", "marvell,armada-8k-cps-pinctrl" - bank-name: A string defining the pinc controller bank name -- reg: A pair of values defining the pin controller base address +- reg: A pair of values defining the pin controller base address and the address space - pin-count: Numeric value defining the amount of multi purpose pins included in this bank diff --git a/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt b/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt index 2a60e4941b..bd272384af 100644 --- a/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt +++ b/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt @@ -8,21 +8,21 @@ Required properties: - anatop-reg-offset: u32 value representing the anatop MFD register offset. - anatop-vol-bit-shift: u32 value representing the bit shift for the register. - anatop-vol-bit-width: u32 value representing the number of bits used in the - register. + register. - anatop-min-bit-val: u32 value representing the minimum value of this - register. + register. - anatop-min-voltage: u32 value representing the minimum voltage of this - regulator. + regulator. - anatop-max-voltage: u32 value representing the maximum voltage of this - regulator. + regulator. Optional properties: - anatop-delay-reg-offset: u32 value representing the anatop MFD step time - register offset. + register offset. - anatop-delay-bit-shift: u32 value representing the bit shift for the step - time register. + time register. - anatop-delay-bit-width: u32 value representing the number of bits used in - the step time register. + the step time register. - anatop-enable-bit: u32 value representing regulator enable bit offset. - vin-supply: input supply phandle. diff --git a/doc/device-tree-bindings/spi/spi-bus.txt b/doc/device-tree-bindings/spi/spi-bus.txt index 420ec9529f..e57897ac0c 100644 --- a/doc/device-tree-bindings/spi/spi-bus.txt +++ b/doc/device-tree-bindings/spi/spi-bus.txt @@ -8,10 +8,10 @@ in slave mode. The SPI master node requires the following properties: - #address-cells - number of cells required to define a chip select - address on the SPI bus. + address on the SPI bus. - #size-cells - should be zero. - compatible - name of SPI bus controller following generic names - recommended practice. + recommended practice. - cs-gpios - (optional) gpios chip select. No other properties are required in the SPI bus node. It is assumed that a driver for an SPI bus device will understand that it is an SPI bus. @@ -45,16 +45,16 @@ SPI slave nodes must be children of the SPI master node and can contain the following properties. - reg - (required) chip select address of device. - compatible - (required) name of SPI device following generic names - recommended practice + recommended practice - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz - spi-cpol - (optional) Empty property indicating device requires - inverse clock polarity (CPOL) mode + inverse clock polarity (CPOL) mode - spi-cpha - (optional) Empty property indicating device requires - shifted clock phase (CPHA) mode + shifted clock phase (CPHA) mode - spi-cs-high - (optional) Empty property indicating device requires - chip select active high + chip select active high - spi-3wire - (optional) Empty property indicating device requires - 3-wire mode. + 3-wire mode. - spi-tx-bus-width - (optional) The bus width(number of data wires) that used for MOSI. Defaults to 1 if not present. - spi-rx-bus-width - (optional) The bus width(number of data wires) that diff --git a/doc/device-tree-bindings/spi/spi-qup.txt b/doc/device-tree-bindings/spi/spi-qup.txt index 3697df2631..2f2f070c5a 100644 --- a/doc/device-tree-bindings/spi/spi-qup.txt +++ b/doc/device-tree-bindings/spi/spi-qup.txt @@ -7,7 +7,7 @@ Required properties: - reg : Physical base address and size of SPI registers map. - clock : Clock phandle (see clock bindings for details). - #address-cells : Number of cells required to define a chip select - address on the SPI bus. Should be set to 1. + address on the SPI bus. Should be set to 1. - #size-cells : Should be zero. - pinctrl-names : Must be "default" - pinctrl-n : At least one pinctrl phandle diff --git a/doc/device-tree-bindings/tpm2/sandbox.txt b/doc/device-tree-bindings/tpm2/sandbox.txt index 3d0f727cc4..05a310e057 100644 --- a/doc/device-tree-bindings/tpm2/sandbox.txt +++ b/doc/device-tree-bindings/tpm2/sandbox.txt @@ -7,5 +7,5 @@ Required properties: Example: tpm { - compatible = "sandbox,tpm2"; + compatible = "sandbox,tpm2"; }; |