m68k: Remove M54418TWR board

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 245 deletions

diff --git a/doc/README.m54418twr b/doc/README.m54418twr
deleted file mode 100644
index 0ca74aa114..0000000000
--- a/doc/README.m54418twr
+++ /dev/null
@@ -1,245 +0,0 @@
-Freescale MCF54418TWR ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created Mar 22, 2012
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m54418twr/m54418twr.c	Dram setup
-- board/freescale/m54418twr/Makefile	Makefile
-- board/freescale/m54418twr/config.mk	config make
-- board/freescale/m54418twr/u-boot.lds	Linker description
-- board/freescale/m54418twr/sbf_dram_init.S
-                                        DDR/SDRAM initialization
-
-- arch/m68k/cpu/mcf5445x/cpu.c		cpu specific code
-- arch/m68k/cpu/mcf5445x/cpu_init.c	Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
-- arch/m68k/cpu/mcf5445x/interrupts.c	cpu specific interrupt support
-- arch/m68k/cpu/mcf5445x/speed.c	system, pci, flexbus, and cpu clock
-- arch/m68k/cpu/mcf5445x/Makefile	Makefile
-- arch/m68k/cpu/mcf5445x/config.mk	config make
-- arch/m68k/cpu/mcf5445x/start.S	start up assembly code
-
-- doc/README.m54418twr			This readme file
-
-- drivers/net/mcffec.c			ColdFire common FEC driver
-- drivers/net/mcfmii.c			ColdFire common MII driver
-- drivers/serial/mcfuart.c		ColdFire common UART driver
-
-- arch/m68k/include/asm/bitops.h	Bit operation function export
-- arch/m68k/include/asm/byteorder.h	Byte order functions
-- arch/m68k/include/asm/fec.h		FEC structure and definition
-- arch/m68k/include/asm/global_data.h	Global data structure
-- arch/m68k/include/asm/immap.h		ColdFire specific header file and driver macros
-- arch/m68k/include/asm/immap_5441x.h	mcf5441x specific header file
-- arch/m68k/include/asm/io.h		io functions
-- arch/m68k/include/asm/m5441x.h	mcf5441x specific header file
-- arch/m68k/include/asm/posix_types.h	Posix
-- arch/m68k/include/asm/processor.h	header file
-- arch/m68k/include/asm/ptrace.h	Exception structure
-- arch/m68k/include/asm/rtc.h		Realtime clock header file
-- arch/m68k/include/asm/string.h	String function export
-- arch/m68k/include/asm/timer.h		Timer structure and definition
-- arch/m68k/include/asm/types.h		Data types definition
-- arch/m68k/include/asm/uart.h		Uart structure and definition
-- arch/m68k/include/asm/u-boot.h	u-boot structure
-
-- include/configs/M54418TWR.h		Board specific configuration file
-
-- arch/m68k/lib/board.c			board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts.c		Coldfire common interrupt functions
-- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
-- arch/m68k/lib/traps.c			Exception init code
-
-1 MCF5441x specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in thie coldfire family
-
-1.2 Configuration settings for M54418TWR Development Board
-CONFIG_MCF5441x			-- define for all MCF5441x CPUs
-CONFIG_M54418			-- define for all Freescale MCF54418 CPUs
-
-CONFIG_MCFUART			-- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE			-- define UART baudrate
-
-CONFIG_MCFFEC			-- define to use common CF FEC driver
-CONFIG_MII			-- enable to use MII driver
-CONFIG_SYS_DISCOVER_PHY		-- enable PHY discovery
-CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN	--
-CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
-CONFIG_SYS_FEC0_MIIBASE		-- Set FEC0 MII base register
-CONFIG_SYS_FEC1_MIIBASE		-- Set FEC0 MII base register
-MCFFEC_TOUT_LOOP		-- set FEC timeout loop
-CONFIG_HAS_ETH1			-- define to enable second FEC in u-boot
-
-CONFIG_MCFTMR			-- define to use DMA timer
-
-CONFIG_SYS_IMMR			-- define for MBAR offset
-
-CONFIG_EXTRA_CLOCK		-- Enable extra clock such as vco, flexbus, pci, etc
-
-CONFIG_SYS_MBAR			-- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM 	-- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM
-
-CONFIG_SYS_CSn_BASE		-- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK		-- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL		-- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE		-- defines the DRAM Base
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
-	MRAM:		0x00000000-0x0003FFFF (256KB)
-	DDR:		0x40000000-0x47FFFFFF (128MB)
-	SRAM:		0x80000000-0x8000FFFF (64KB)
-	IP:		0xE0000000-0xFFFFFFFF (512MB)
-
-3. COMPILATION
-==============
-3.1	To create U-Boot the gcc-4.x compiler set (ColdFire ELF version)
-from codesourcery.com was used. Download it from:
-http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot
-   make distclean
-   make M54418TWR_config, or			- default to spi serial flash boot, 50Mhz input clock
-   make M54418TWR_nand_mii_config, or		- default to nand flash boot, mii mode, 25Mhz input clock
-   make M54418TWR_nand_rmii_config, or		- default to nand flash boot, rmii mode, 50Mhz input clock
-   make M54418TWR_nand_rmii_lowfreq_config, or	- default to nand flash boot, rmii mode, 50Mhz input clock
-   make M54418TWR_serial_mii_config, or		- default to spi serial flash boot, 25Mhz input clock
-   make M54418TWR_serial_rmii_config, or	- default to spi serial flash boot, 50Mhz input clock
-   make
-
-4. SCREEN DUMP
-==============
-4.1 M54418TWR Development board
-    Boot from NAND flash (NOTE: May not show exactly the same)
-
-U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54)
-
-CPU:   Freescale MCF54418 (Mask:a3 Version:1)
-       CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz
-       INP CLK 50 MHz VCO CLK 500 MHz
-Board: Freescale MCF54418 Tower System
-SPI:   ready
-DRAM:  128 MiB
-NAND:  256 MiB
-In:    serial
-Out:   serial
-Err:   serial
-Net:   FEC0, FEC1
--> pri
-baudrate=115200
-bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k
-ernel)ro,-(jffs2) console=ttyS0,115200
-bootdelay=2
-eth1addr=00:e0:0c:bc:e5:61
-ethact=FEC0
-ethaddr=00:e0:0c:bc:e5:60
-fileaddr=40010000
-filesize=27354
-gatewayip=192.168.1.1
-hostname=M54418TWR
-inpclk=50000000
-ipaddr=192.168.1.2
-load=tftp ${loadaddr} ${u-boot};
-loadaddr=0x40010000
-mem=129024k
-netdev=eth0
-netmask=255.255.255.0
-prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save
-serverip=192.168.1.1
-stderr=serial
-stdin=serial
-stdout=serial
-u-boot=u-boot.bin
-upd=run load; run prog
-
-Environment size: 653/131068 bytes
--> bdinfo
-memstart    = 0x40000000
-memsize     = 0x08000000
-flashstart  = 0x00000000
-flashsize   = 0x00000000
-flashoffset = 0x00000000
-sramstart   = 0x80000000
-sramsize    = 0x00010000
-mbar        = 0xFC000000
-cpufreq     =    250 MHz
-busfreq     =    125 MHz
-flbfreq     =    125 MHz
-inpfreq     =     50 MHz
-vcofreq     =    500 MHz
-ethaddr     = 00:e0:0c:bc:e5:60
-eth1addr    = 00:e0:0c:bc:e5:61
-ip_addr     = 192.168.1.2
-baudrate    = 115200 bps
--> help
-?       - alias for 'help'
-base    - print or set address offset
-bdinfo  - print Board Info structure
-boot    - boot default, i.e., run 'bootcmd'
-bootd   - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm   - boot application image from memory
-bootp   - boot image via network using BOOTP/TFTP protocol
-bootvx  - Boot vxWorks from an ELF image
-cmp     - memory compare
-coninfo - print console devices and information
-cp      - memory copy
-crc32   - checksum calculation
-dcache  - enable or disable data cache
-dhcp    - boot image via network using DHCP/TFTP protocol
-echo    - echo args to console
-editenv - edit environment variable
-env     - environment handling commands
-exit    - exit script
-false   - do nothing, unsuccessfully
-go      - start application at address 'addr'
-help    - print command description/usage
-icache  - enable or disable instruction cache
-iminfo  - print header information for application image
-imxtract- extract a part of a multi-image
-itest   - return true/false on integer compare
-loop    - infinite loop on address range
-md      - memory display
-mdio    - MDIO utility commands
-mii     - MII utility commands
-mm      - memory modify (auto-incrementing address)
-mtest   - simple RAM read/write test
-mw      - memory write (fill)
-nand    - NAND sub-system
-nb_update- Nand boot update  program
-nboot   - boot from NAND device
-nfs     - boot image via network using NFS protocol
-nm      - memory modify (constant address)
-ping    - send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-reginfo - print register information
-reset   - Perform RESET of the CPU
-run     - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv  - set environment variables
-sf      - SPI flash sub-system
-showvar - print local hushshell variables
-sleep   - delay execution for some time
-source  - run script from memory
-sspi    - SPI utility command
-test    - minimal test like /bin/sh
-tftpboot- boot image via network using TFTP protocol
-true    - do nothing, successfully
-version - print monitor, compiler and linker version