x86: edison: Add documentation for using am xFSTK image

Add a description of how to flash Edison using the xFSTK tool.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

1 files changed, 120 insertions, 0 deletions

diff --git a/doc/board/intel/edison.rst b/doc/board/intel/edison.rst
index 1aee2a1fc0..d658fac02c 100644
--- a/doc/board/intel/edison.rst
+++ b/doc/board/intel/edison.rst
@@ -39,3 +39,123 @@ use.
    reset the board::
 
    => reset
+
+
+Updating U-Boot using xFSTK
+---------------------------
+
+You can also update U-Boot using the xfstk-dldr-solo tool if you can build it.
+One way to do that is to follow the `xFSTK`_ instructions. You may need to use
+a virtual machine running Ubuntu Trusty. Once you have built it and installed
+libboost-all-dev, you can copy xfstk-dldr-solo to /usr/local/bin and
+libboost_program_options.so.1.54.0 to /usr/lib/i386-linux-gnu/ and with luck
+it will work. You might fine this `drive`_ helpful.
+
+If it does, then you can download and unpack the Edison reocovery image,
+install dfu-util, reset your board and flash U-Boot like this::
+
+   $ xfstk-dldr-solo --gpflags 0x80000007 \
+      --osimage u-boot-edison.img \
+      --fwdnx recover/edison_dnx_fwr.bin \
+      --fwimage recover/edison_ifwi-dbg-00.bin \
+      --osdnx recover/edison_dnx_osr.bin
+
+This should show the following
+
+.. code-block:: none
+
+  XFSTK Downloader Solo 0.0.0
+  Copyright (c) 2015 Intel Corporation
+  Build date and time: Aug 15 2020 15:07:13
+
+  .Intel SoC Device Detection Found
+  Parsing Commandline....
+  Registering Status Callback....
+  .Initiating Download Process....
+  .......(lots of dots)........XFSTK-STATUS--Reconnecting to device - Attempt #1
+  .......(even more dots)......................
+
+
+You have about 10 seconds after resetting the board to type the above command.
+If you want to check if the board is ready, type:
+
+.. code-block:: none
+
+  lsusb |egrep "8087|8086"
+  Bus 001 Device 004: ID 8086:e005 Intel Corp.
+
+If you see a device with the same ID as above, the board is waiting for your
+command.
+
+After about 5 seconds you should see some console output from the board:
+
+.. code-block:: none
+
+  ******************************
+  PSH KERNEL VERSION: b0182b2b
+  		WR: 20104000
+  ******************************
+
+  SCU IPC: 0x800000d0  0xfffce92c
+
+  PSH miaHOB version: TNG.B0.VVBD.0000000c
+
+  microkernel built 11:24:08 Feb  5 2015
+
+  ******* PSH loader *******
+  PCM page cache size = 192 KB
+  Cache Constraint = 0 Pages
+  Arming IPC driver ..
+  Adding page store pool ..
+  PagestoreAddr(IMR Start Address) = 0x04899000
+  pageStoreSize(IMR Size)          = 0x00080000
+
+  *** Ready to receive application ***
+
+  After another 10 seconds the xFSTK tool completes and the board resets. About
+  10 seconds after that should see the above message again and then within a
+  few seconds U-Boot should start on your board:
+
+.. code-block:: none
+
+  U-Boot 2020.10-rc3 (Sep 03 2020 - 18:44:28 -0600)
+
+  CPU:   Genuine Intel(R) CPU   4000  @  500MHz
+  DRAM:  980.6 MiB
+  WDT:   Started with servicing (60s timeout)
+  MMC:   mmc@ff3fc000: 0, mmc@ff3fa000: 1
+  Loading Environment from MMC... OK
+  In:    serial
+  Out:   serial
+  Err:   serial
+  Saving Environment to MMC... Writing to redundant MMC(0)... OK
+  Saving Environment to MMC... Writing to MMC(0)... OK
+  Net:   No ethernet found.
+  Hit any key to stop autoboot:  0
+  Target:blank
+  Partitioning using GPT
+  Writing GPT: success!
+  Saving Environment to MMC... Writing to redundant MMC(0)... OK
+  Flashing already done...
+  5442816 bytes read in 238 ms (21.8 MiB/s)
+  Valid Boot Flag
+  Setup Size = 0x00003c00
+  Magic signature found
+  Using boot protocol version 2.0c
+  Linux kernel version 3.10.17-poky-edison+ (ferry@kalamata) #1 SMP PREEMPT Mon Jan 11 14:54:18 CET 2016
+  Building boot_params at 0x00090000
+  Loading bzImage at address 100000 (5427456 bytes)
+  Magic signature found
+  Kernel command line: "rootwait root=PARTUUID=ada722ed-6410-764e-8619-abff6f66e10e rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=2249baf774c675598661a63098c0ad41 g_multi.dev_addr=02:00:86:c0:ad:41 platform_mrfld_audio.audio_codec=dummy"
+  Magic signature found
+
+  Starting kernel ...
+
+  ...
+
+  Poky (Yocto Project Reference Distro) 1.7.2 edison ttyMFD2
+
+  edison login:
+
+.. _xFSTK: https://community.intel.com/t5/Intel-Makers/Building-xFSTK-on-Ubuntu-14-04-32-bit-for-flashing-Edison/td-p/538081
+.. _drive: https://drive.google.com/drive/u/0/folders/1URPHrOk9-UBsh8hjv-7WwC0W6Fy61uAJ