diff options
| author | Pali Rohár <pali@kernel.org> | 2021-03-05 17:52:42 +0300 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2021-03-12 09:44:21 +0300 |
| commit | 15942805b7efe47e186d8b30ec378666561ad1f9 (patch) | |
| tree | f7bf2fcc1d49c12c45267a4dd9581983445c94d5 /drivers/ddr | |
| parent | 2fa30d0484307dd134a6f923bc8c7d0c89a658f9 (diff) | |
| download | u-boot-15942805b7efe47e186d8b30ec378666561ad1f9.tar.xz | |
arm: mvebu: a38x: Remove dead code ARMADA_39X
Config option ARMADA_39X is never set so remove all dead code hidden under
ifdef CONFIG_ARMADA_39X blocks.
Also remove useless checks for CONFIG_ARMADA_38X define as this macro is
always defined for a38x code path.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers/ddr')
| -rw-r--r-- | drivers/ddr/marvell/a38x/ddr3_training_leveling.c | 2 | ||||
| -rw-r--r-- | drivers/ddr/marvell/a38x/mv_ddr_plat.c | 8 | ||||
| -rw-r--r-- | drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h | 7 |
3 files changed, 0 insertions, 17 deletions
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c index 7f7df6794a..6523281f2b 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c @@ -915,10 +915,8 @@ int ddr3_tip_dynamic_write_leveling(u32 dev_num, int phase_remove) DEBUG_LEVELING(DEBUG_LEVEL_ERROR, ("training done failed\n")); } else { /* check for training pass */ reg_data = data_read[0]; -#if defined(CONFIG_ARMADA_38X) /* JIRA #1498 for 16 bit with ECC */ if (tm->bus_act_mask == 0xb) /* set to data to 0 to skip the check */ reg_data = 0; -#endif if (reg_data != PASS) DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("training result failed\n")); diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c index da0d63d4f7..faafc86ea2 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c +++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c @@ -559,11 +559,7 @@ static int ddr3_tip_a38x_get_medium_freq(int dev_num, enum mv_ddr_freq *freq) static int ddr3_tip_a38x_get_device_info(u8 dev_num, struct ddr3_device_info *info_ptr) { -#if defined(CONFIG_ARMADA_39X) - info_ptr->device_id = 0x6900; -#else info_ptr->device_id = 0x6800; -#endif info_ptr->ck_delay = ck_delay; return MV_OK; @@ -666,11 +662,7 @@ static int mv_ddr_sw_db_init(u32 dev_num, u32 board_id) ddr3_tip_dev_attr_set(dev_num, MV_ATTR_TIP_REV, MV_TIP_REV_4); ddr3_tip_dev_attr_set(dev_num, MV_ATTR_PHY_EDGE, MV_DDR_PHY_EDGE_POSITIVE); ddr3_tip_dev_attr_set(dev_num, MV_ATTR_OCTET_PER_INTERFACE, DDR_INTERFACE_OCTETS_NUM); -#ifdef CONFIG_ARMADA_39X - ddr3_tip_dev_attr_set(dev_num, MV_ATTR_INTERLEAVE_WA, 1); -#else ddr3_tip_dev_attr_set(dev_num, MV_ATTR_INTERLEAVE_WA, 0); -#endif ca_delay = 0; delay_enable = 1; diff --git a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h index cf5142094d..10b0d45b35 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h @@ -79,7 +79,6 @@ enum suspend_wakeup_status { * If suspend to RAM is not supported set '-1' */ -#ifdef CONFIG_ARMADA_38X #define MV_BOARD_WAKEUP_GPIO_INFO { \ {RD_NAS_68XX_ID, -2 }, \ {DB_68XX_ID, -1 }, \ @@ -89,12 +88,6 @@ enum suspend_wakeup_status { {DB_BP_6821_ID, -2 }, \ {DB_AMC_6820_ID, -2 }, \ }; -#else -#define MV_BOARD_WAKEUP_GPIO_INFO { \ - {A39X_RD_69XX_ID, -1 }, \ - {A39X_DB_69XX_ID, -1 }, \ -}; -#endif /* CONFIG_ARMADA_38X */ enum suspend_wakeup_status mv_ddr_sys_env_suspend_wakeup_check(void); u32 mv_ddr_sys_env_get_cs_ena_from_reg(void); |