diff options
| author | Benedikt Grassl <Benedikt.Grassl@rohde-schwarz.com> | 2020-04-14 08:32:12 +0300 |
|---|---|---|
| committer | Michal Simek <michal.simek@xilinx.com> | 2020-04-27 14:53:13 +0300 |
| commit | 942b5fc03218d1c94468fc658e7dec65dabcc830 (patch) | |
| tree | 011d1c7a66ea82a65c3ff20307470cb88239d8bb /drivers/mmc/zynq_sdhci.c | |
| parent | d202f67db0771247de562af5d6a5df778702857b (diff) | |
| download | u-boot-942b5fc03218d1c94468fc658e7dec65dabcc830.tar.xz | |
mmc: zynq: parse dt when probing
Currently, the entry "bus-width = <8>" in the ZynqMP's sdhci nodes
is not evaluated. This results in the bus width staying at its default
value (4 bit in HS200 mode).
Fix this by calling mmc_of_parse. This function also checks for the
"no-1-8-v" and "max-frequency" entries. Remove the handling of those
nodes from this driver.
Signed-off-by: Benedikt Grassl <Benedikt.Grassl@rohde-schwarz.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'drivers/mmc/zynq_sdhci.c')
| -rw-r--r-- | drivers/mmc/zynq_sdhci.c | 15 |
1 files changed, 6 insertions, 9 deletions
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index da3ff53da1..18925d01fa 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -22,14 +22,12 @@ DECLARE_GLOBAL_DATA_PTR; struct arasan_sdhci_plat { struct mmc_config cfg; struct mmc mmc; - unsigned int f_max; }; struct arasan_sdhci_priv { struct sdhci_host *host; u8 deviceid; u8 bank; - u8 no_1p8; }; #if defined(CONFIG_ARCH_ZYNQMP) @@ -238,8 +236,11 @@ static int arasan_sdhci_probe(struct udevice *dev) host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE; #endif - if (priv->no_1p8) - host->quirks |= SDHCI_QUIRK_NO_1_8_V; + plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ; + + ret = mmc_of_parse(dev, &plat->cfg); + if (ret) + return ret; host->max_clk = clock; @@ -247,7 +248,7 @@ static int arasan_sdhci_probe(struct udevice *dev) host->mmc->dev = dev; host->mmc->priv = host; - ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max, + ret = sdhci_setup_cfg(&plat->cfg, host, plat->cfg.f_max, CONFIG_ZYNQ_SDHCI_MIN_FREQ); if (ret) return ret; @@ -258,7 +259,6 @@ static int arasan_sdhci_probe(struct udevice *dev) static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) { - struct arasan_sdhci_plat *plat = dev_get_platdata(dev); struct arasan_sdhci_priv *priv = dev_get_priv(dev); priv->host = calloc(1, sizeof(struct sdhci_host)); @@ -277,10 +277,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1); priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1); - priv->no_1p8 = dev_read_bool(dev, "no-1-8-v"); - plat->f_max = dev_read_u32_default(dev, "max-frequency", - CONFIG_ZYNQ_SDHCI_MAX_FREQ); return 0; } |