diff options
author | Andre Przywara <andre.przywara@arm.com> | 2021-04-21 11:33:04 +0300 |
---|---|---|
committer | Andre Przywara <andre.przywara@arm.com> | 2021-07-10 03:22:09 +0300 |
commit | ac62dadb37cb57fdf2117f191c32f9992f3e5eca (patch) | |
tree | b562684a47c9454c803611e37e7835e65749b589 /drivers/mmc | |
parent | 9faae5457f5221f2f036153399ab38f37114a871 (diff) | |
download | u-boot-ac62dadb37cb57fdf2117f191c32f9992f3e5eca.tar.xz |
mmc: sunxi: Use mmc_of_parse()
At the moment the Allwinner MMC driver parses the bus-width and
non-removable DT properties itself, in the probe() routine.
There is actually a generic function provided by the MMC framework doing
this job, also it parses more generic properties like broken-cd and
advanced transfer modes.
Drop our own code and call mmc_of_parse() instead, to get all new
features for free.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/sunxi_mmc.c | 32 |
1 files changed, 17 insertions, 15 deletions
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 115b519546..178b8cf106 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -37,7 +37,6 @@ struct sunxi_mmc_priv { uint32_t *mclkreg; unsigned fatal_err; struct gpio_desc cd_gpio; /* Change Detect GPIO */ - int cd_inverted; /* Inverted Card Detect */ struct sunxi_mmc *reg; struct mmc_config cfg; }; @@ -612,12 +611,21 @@ static int sunxi_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, static int sunxi_mmc_getcd(struct udevice *dev) { + struct mmc *mmc = mmc_get_mmc_dev(dev); struct sunxi_mmc_priv *priv = dev_get_priv(dev); + /* If polling, assume that the card is always present. */ + if ((mmc->cfg->host_caps & MMC_CAP_NONREMOVABLE) || + (mmc->cfg->host_caps & MMC_CAP_NEEDS_POLL)) + return 1; + if (dm_gpio_is_valid(&priv->cd_gpio)) { int cd_state = dm_gpio_get_value(&priv->cd_gpio); - return cd_state ^ priv->cd_inverted; + if (mmc->cfg->host_caps & MMC_CAP_CD_ACTIVE_HIGH) + return !cd_state; + else + return cd_state; } return 1; } @@ -649,23 +657,21 @@ static int sunxi_mmc_probe(struct udevice *dev) struct mmc_config *cfg = &plat->cfg; struct ofnode_phandle_args args; u32 *ccu_reg; - int bus_width, ret; + int ret; cfg->name = dev->name; - bus_width = dev_read_u32_default(dev, "bus-width", 1); cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; - cfg->host_caps = 0; - if (bus_width == 8) - cfg->host_caps |= MMC_MODE_8BIT; - if (bus_width >= 4) - cfg->host_caps |= MMC_MODE_4BIT; - cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS; cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; cfg->f_min = 400000; cfg->f_max = 52000000; + ret = mmc_of_parse(dev, cfg); + if (ret) + return ret; + priv->reg = dev_read_addr_ptr(dev); /* We don't have a sunxi clock driver so find the clock address here */ @@ -691,17 +697,13 @@ static int sunxi_mmc_probe(struct udevice *dev) return ret; /* This GPIO is optional */ - if (!dev_read_bool(dev, "non-removable") && - !gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, + if (!gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN)) { int cd_pin = gpio_get_number(&priv->cd_gpio); sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP); } - /* Check if card detect is inverted */ - priv->cd_inverted = dev_read_bool(dev, "cd-inverted"); - upriv->mmc = &plat->mmc; /* Reset controller */ |