Merge tag 'mips-pull-2020-06-29' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next

- net: pcnet: cleanup and add DM support
- Makefile: add rule to build an endian-swapped U-Boot image
  used by MIPS Malta EL variants
- CI: add Qemu tests for MIPS Malta

3 files changed, 39 insertions, 17 deletions

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index f42e018434..5b61eeb214 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -907,19 +907,9 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
 		ctrl = readl(&regs->autoc12err);
 		if ((!(ctrl & MIX_CTRL_EXE_TUNE)) &&
 		    (ctrl & MIX_CTRL_SMPCLK_SEL)) {
-			/*
-			 * need to wait some time, make sure sd/mmc fininsh
-			 * send out tuning data, otherwise, the sd/mmc can't
-			 * response to any command when the card still out
-			 * put the tuning data.
-			 */
-			mdelay(1);
 			ret = 0;
 			break;
 		}
-
-		/* Add 1ms delay for SD and eMMC */
-		mdelay(1);
 	}
 
 	writel(irqstaten, &regs->irqstaten);
@@ -1267,6 +1257,18 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
 			val |= priv->tuning_start_tap;
 			val &= ~ESDHC_TUNING_STEP_MASK;
 			val |= (priv->tuning_step) << ESDHC_TUNING_STEP_SHIFT;
+
+			/* Disable the CMD CRC check for tuning, if not, need to
+			 * add some delay after every tuning command, because
+			 * hardware standard tuning logic will directly go to next
+			 * step once it detect the CMD CRC error, will not wait for
+			 * the card side to finally send out the tuning data, trigger
+			 * the buffer read ready interrupt immediately. If usdhc send
+			 * the next tuning command some eMMC card will stuck, can't
+			 * response, block the tuning procedure or the first command
+			 * after the whole tuning procedure always can't get any response.
+			 */
+			val |= ESDHC_TUNING_CMD_CRC_CHECK_DISABLE;
 			writel(val, &regs->tuning_ctrl);
 		}
 	}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index b61ce8db14..50f47d4ba2 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -669,12 +669,15 @@ static int mmc_send_op_cond_iter(struct mmc *mmc, int use_arg)
 static int mmc_send_op_cond(struct mmc *mmc)
 {
 	int err, i;
+	int timeout = 1000;
+	uint start;
 
 	/* Some cards seem to need this */
 	mmc_go_idle(mmc);
 
+	start = get_timer(0);
  	/* Asking to the card its capabilities */
-	for (i = 0; i < 2; i++) {
+	for (i = 0; ; i++) {
 		err = mmc_send_op_cond_iter(mmc, i != 0);
 		if (err)
 			return err;
@@ -682,6 +685,10 @@ static int mmc_send_op_cond(struct mmc *mmc)
 		/* exit if not busy (flag seems to be inverted) */
 		if (mmc->ocr & OCR_BUSY)
 			break;
+
+		if (get_timer(start) > timeout)
+			return -ETIMEDOUT;
+		udelay(100);
 	}
 	mmc->op_cond_pending = 1;
 	return 0;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 92cc8434af..f4eb655f6e 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -567,6 +567,7 @@ static int sdhci_set_ios(struct mmc *mmc)
 #endif
 	u32 ctrl;
 	struct sdhci_host *host = mmc->priv;
+	bool no_hispd_bit = false;
 
 	if (host->ops && host->ops->set_control_reg)
 		host->ops->set_control_reg(host);
@@ -594,14 +595,26 @@ static int sdhci_set_ios(struct mmc *mmc)
 			ctrl &= ~SDHCI_CTRL_4BITBUS;
 	}
 
-	if (mmc->clock > 26000000)
-		ctrl |= SDHCI_CTRL_HISPD;
-	else
-		ctrl &= ~SDHCI_CTRL_HISPD;
-
 	if ((host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) ||
-	    (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE))
+	    (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE)) {
 		ctrl &= ~SDHCI_CTRL_HISPD;
+		no_hispd_bit = true;
+	}
+
+	if (!no_hispd_bit) {
+		if (mmc->selected_mode == MMC_HS ||
+		    mmc->selected_mode == SD_HS ||
+		    mmc->selected_mode == MMC_DDR_52 ||
+		    mmc->selected_mode == MMC_HS_200 ||
+		    mmc->selected_mode == MMC_HS_400 ||
+		    mmc->selected_mode == UHS_SDR25 ||
+		    mmc->selected_mode == UHS_SDR50 ||
+		    mmc->selected_mode == UHS_SDR104 ||
+		    mmc->selected_mode == UHS_DDR50)
+			ctrl |= SDHCI_CTRL_HISPD;
+		else
+			ctrl &= ~SDHCI_CTRL_HISPD;
+	}
 
 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);