Merge branch 'master' into next

Signed-off-by: Tom Rini <trini@konsulko.com>

4 files changed, 29 insertions, 67 deletions

diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index d0b492b5a1..ee96abbf77 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -5,6 +5,7 @@
  */
 #include <common.h>
 #include <env.h>
+#include <image.h>
 #include <malloc.h>
 #include <asm/io.h>
 #include <linux/errno.h>
@@ -513,6 +514,23 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 	void *addr = NULL;
 #endif
 
+	rc = fit_check_format(addr, CONFIG_SYS_QE_FMAN_FW_LENGTH);
+	if (!rc) {
+		size_t unused;
+		const void *new_addr;
+
+		rc = fit_get_data_conf_prop(addr, "fman", &new_addr, &unused);
+		if (rc)
+			return rc;
+		addr = (void *)new_addr;
+	} else if (CONFIG_IS_ENABLED(FIT_SIGNATURE)) {
+		/*
+		 * Using a (signed) FIT wrapper is mandatory if we are
+		 * doing verified boot.
+		 */
+		return rc;
+	}
+
 	/* Upload the Fman microcode if it's present */
 	rc = fman_upload_firmware(index, &reg->fm_imem, addr);
 	if (rc)
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index bc1c31d467..68833f9ddd 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -137,13 +137,7 @@ int parse_mc_firmware_fit_image(u64 mc_fw_addr,
 				size_t *raw_image_size)
 {
 	int format;
-	void *fit_hdr;
-	int node_offset;
-	const void *data;
-	size_t size;
-	const char *uname = "firmware";
-
-	fit_hdr = (void *)mc_fw_addr;
+	void *fit_hdr = (void *)mc_fw_addr;
 
 	/* Check if Image is in FIT format */
 	format = genimg_get_format(fit_hdr);
@@ -158,26 +152,8 @@ int parse_mc_firmware_fit_image(u64 mc_fw_addr,
 		return -EINVAL;
 	}
 
-	node_offset = fit_image_get_node(fit_hdr, uname);
-
-	if (node_offset < 0) {
-		printf("fsl-mc: ERR: Bad firmware image (missing subimage)\n");
-		return -ENOENT;
-	}
-
-	/* Verify MC firmware image */
-	if (!(fit_image_verify(fit_hdr, node_offset))) {
-		printf("fsl-mc: ERR: Bad firmware image (bad CRC)\n");
-		return -EINVAL;
-	}
-
-	/* Get address and size of raw image */
-	fit_image_get_data(fit_hdr, node_offset, &data, &size);
-
-	*raw_image_addr = data;
-	*raw_image_size = size;
-
-	return 0;
+	return fit_get_data_node(fit_hdr, "firmware", raw_image_addr,
+				 raw_image_size);
 }
 #endif
 
diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c
index cd4c2c29a6..835e5bd8bd 100644
--- a/drivers/net/fsl_enetc.c
+++ b/drivers/net/fsl_enetc.c
@@ -22,6 +22,8 @@
 
 #define ENETC_DRIVER_NAME	"enetc_eth"
 
+static int enetc_remove(struct udevice *dev);
+
 /*
  * sets the MAC address in IERB registers, this setting is persistent and
  * carried over to Linux.
@@ -319,6 +321,7 @@ static int enetc_config_phy(struct udevice *dev)
 static int enetc_probe(struct udevice *dev)
 {
 	struct enetc_priv *priv = dev_get_priv(dev);
+	int res;
 
 	if (ofnode_valid(dev_ofnode(dev)) && !ofnode_is_available(dev_ofnode(dev))) {
 		enetc_dbg(dev, "interface disabled\n");
@@ -350,7 +353,10 @@ static int enetc_probe(struct udevice *dev)
 
 	enetc_start_pcs(dev);
 
-	return enetc_config_phy(dev);
+	res = enetc_config_phy(dev);
+	if(res)
+		enetc_remove(dev);
+	return res;
 }
 
 /*
diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
index 82a4aa89a4..da4f2ca42a 100644
--- a/drivers/net/pfe_eth/pfe_firmware.c
+++ b/drivers/net/pfe_eth/pfe_firmware.c
@@ -104,45 +104,7 @@ err:
 static int pfe_get_fw(const void **data,
 		      size_t *size, char *fw_name)
 {
-	int conf_node_off, fw_node_off;
-	char *conf_node_name = NULL;
-	char *desc;
-	int ret = 0;
-
-	conf_node_name = PFE_FIRMWARE_FIT_CNF_NAME;
-
-	conf_node_off = fit_conf_get_node(pfe_fit_addr, conf_node_name);
-	if (conf_node_off < 0) {
-		printf("PFE Firmware: %s: no such config\n", conf_node_name);
-		return -ENOENT;
-	}
-
-	fw_node_off = fit_conf_get_prop_node(pfe_fit_addr, conf_node_off,
-					     fw_name);
-	if (fw_node_off < 0) {
-		printf("PFE Firmware: No '%s' in config\n",
-		       fw_name);
-		return -ENOLINK;
-	}
-
-	if (!(fit_image_verify(pfe_fit_addr, fw_node_off))) {
-		printf("PFE Firmware: Bad firmware image (bad CRC)\n");
-		return -EINVAL;
-	}
-
-	if (fit_image_get_data(pfe_fit_addr, fw_node_off, data, size)) {
-		printf("PFE Firmware: Can't get %s subimage data/size",
-		       fw_name);
-		return -ENOENT;
-	}
-
-	ret = fit_get_desc(pfe_fit_addr, fw_node_off, &desc);
-	if (ret)
-		printf("PFE Firmware: Can't get description\n");
-	else
-		printf("%s\n", desc);
-
-	return ret;
+	return fit_get_data_conf_prop(pfe_fit_addr, fw_name, data, size);
 }
 
 /*