diff options
author | Pali Rohár <pali@kernel.org> | 2021-09-26 01:54:42 +0300 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2021-10-08 09:37:55 +0300 |
commit | cb056005dc674fb5fce89d2b7bdc37594b180b68 (patch) | |
tree | aea9e670d7c113d4198e56af5b9b1b7024145b90 /drivers/pci | |
parent | 6b2771cb19623f7028085e47a52e30813130f61e (diff) | |
download | u-boot-cb056005dc674fb5fce89d2b7bdc37594b180b68.tar.xz |
arm: a37xx: pci: Add support for accessing PCI Bridge on root bus
Aardvark does not have a real PCIe Root Port device on the root bus.
Instead it has PCIe registers of PCIe Root Port device mapped in
internal Aardvark memory space starting at offset 0xc0.
The PCIe Root Port itself is normally available as a PCI Bridge device
on the root bus with bus number zero. Aardvark instead has the
configuration registers of this PCI Bridge at offset 0x00 of Aardvark's
memory space, but the class code of this device is Mass Storage
Controller (0x010400), instead of PCI Bridge (0x600400), which causes
U-Boot to fail to recognize it as a P2P Bridge
Add a hook into the pcie_advk_read_config() / pcie_advk_write_config()
functions to redirect access for root bus from PIO transfer to this
internal Aardvark memory space. This will allow U-Boot to access
configuration space of this PCI Bridge which represents PCIe Root Port.
Redirect access to PCI Bridge registers in range 0x10 - 0x34 to driver's
internal buffer (cfgcache[]). This is because at those addresses
Aardvark has different registers, incompatible with config space of a
PCI Bridge.
Redirect access to PCI Bridge register PCI_ROM_ADDRESS1 (0x38) to
Aardvark internal address for that register (0x30).
When reading PCI Bridge register PCI_HEADER_TYPE, set it explicitly to
value Type 1 (PCI_HEADER_TYPE_BRIDGE) as PCI Bridge must be of Type 1.
When writing to PCI_PRIMARY_BUS or PCI_SECONDARY_BUS registers on this
PCI Bridge, correctly update driver's first_busno and sec_busno
variables, so that pcie_advk_addr_valid() function can check if address
of any device behind the root bus is valid and that PIO transfers are
started with correct config type (1 vs 0), which is required for
accessing devices behind some PCI bridge after the root bus.
U-Boot's PCI_PNP code sets primary and secondary bus numbers as relative
to the configured bus number of the root bus. This is done so that
U-Boot can support multiple PCIe host bridges or multiple root port
buses, when internal bus numbers are different.
Now that root bus is available, update code in pcie_advk_read_config()
and pcie_advk_write_config() functions to correctly calculate real
Aardvark bus number of the target device from U-Boot's bus number as:
busno = PCI_BUS(bdf) - dev_seq(bus)
Stefan: Small fix of header masking as suggested by Pali.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers/pci')
-rw-r--r-- | drivers/pci/pci-aardvark.c | 143 |
1 files changed, 124 insertions, 19 deletions
diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c index 741e0431e1..082fdc3b74 100644 --- a/drivers/pci/pci-aardvark.c +++ b/drivers/pci/pci-aardvark.c @@ -39,6 +39,8 @@ #define PCIE_CORE_CMD_IO_ACCESS_EN BIT(0) #define PCIE_CORE_CMD_MEM_ACCESS_EN BIT(1) #define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2) +#define PCIE_CORE_DEV_REV_REG 0x8 +#define PCIE_CORE_EXP_ROM_BAR_REG 0x30 #define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8 #define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4) #define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11) @@ -163,7 +165,7 @@ #define PCIE_CONFIG_WR_TYPE1 0xb /* PCI_BDF shifts 8bit, so we need extra 4bit shift */ -#define PCIE_BDF(dev) (dev << 4) +#define PCIE_BDF(b, d, f) (PCI_BDF(b, d, f) << 4) #define PCIE_CONF_BUS(bus) (((bus) & 0xff) << 20) #define PCIE_CONF_DEV(dev) (((dev) & 0x1f) << 15) #define PCIE_CONF_FUNC(fun) (((fun) & 0x7) << 12) @@ -188,13 +190,17 @@ * first_busno stores the bus number of the PCIe root-port * number which may vary depending on the PCIe setup * (PEX switches etc). + * @sec_busno: sec_busno stores the bus number for the device behind + * the PCIe root-port * @device: The pointer to PCI uclass device. */ struct pcie_advk { void *base; int first_busno; + int sec_busno; struct udevice *dev; struct gpio_desc reset_gpio; + u32 cfgcache[0x34 - 0x10]; }; static inline void advk_writel(struct pcie_advk *pcie, uint val, uint reg) @@ -210,22 +216,30 @@ static inline uint advk_readl(struct pcie_advk *pcie, uint reg) /** * pcie_advk_addr_valid() - Check for valid bus address * + * @pcie: Pointer to the PCI bus + * @busno: Bus number of PCI device + * @dev: Device number of PCI device + * @func: Function number of PCI device * @bdf: The PCI device to access - * @first_busno: Bus number of the PCIe controller root complex * - * Return: 1 on valid, 0 on invalid + * Return: true on valid, false on invalid */ -static int pcie_advk_addr_valid(pci_dev_t bdf, int first_busno) +static bool pcie_advk_addr_valid(struct pcie_advk *pcie, + int busno, u8 dev, u8 func) { + /* On the primary (local) bus there is only one PCI Bridge */ + if (busno == pcie->first_busno && (dev != 0 || func != 0)) + return false; + /* - * In PCIE-E only a single device (0) can exist - * on the local bus. Beyound the local bus, there might be - * a Switch and everything is possible. + * In PCI-E only a single device (0) can exist on the secondary bus. + * Beyond the secondary bus, there might be a Switch and anything is + * possible. */ - if ((PCI_BUS(bdf) == first_busno) && (PCI_DEV(bdf) > 0)) - return 0; + if (busno == pcie->sec_busno && dev != 0) + return false; - return 1; + return true; } /** @@ -355,21 +369,56 @@ static int pcie_advk_read_config(const struct udevice *bus, pci_dev_t bdf, enum pci_size_t size) { struct pcie_advk *pcie = dev_get_priv(bus); + int busno = PCI_BUS(bdf) - dev_seq(bus); int retry_count; bool allow_crs; + ulong data; uint reg; int ret; dev_dbg(pcie->dev, "PCIE CFG read: (b,d,f)=(%2d,%2d,%2d) ", PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); - if (!pcie_advk_addr_valid(bdf, pcie->first_busno)) { + if (!pcie_advk_addr_valid(pcie, busno, PCI_DEV(bdf), PCI_FUNC(bdf))) { dev_dbg(pcie->dev, "- out of range\n"); *valuep = pci_get_ff(size); return 0; } /* + * The configuration space of the PCI Bridge on primary (local) bus is + * not accessible via PIO transfers like all other PCIe devices. PCI + * Bridge config registers are available directly in Aardvark memory + * space starting at offset zero. Moreover PCI Bridge registers in the + * range 0x10 - 0x34 are not available and register 0x38 (Expansion ROM + * Base Address) is at offset 0x30. + * We therefore read configuration space content of the primary PCI + * Bridge from our virtual cache. + */ + if (busno == pcie->first_busno) { + if (offset >= 0x10 && offset < 0x34) + data = pcie->cfgcache[(offset - 0x10) / 4]; + else if ((offset & ~3) == PCI_ROM_ADDRESS1) + data = advk_readl(pcie, PCIE_CORE_EXP_ROM_BAR_REG); + else + data = advk_readl(pcie, offset & ~3); + + if ((offset & ~3) == (PCI_HEADER_TYPE & ~3)) { + /* + * Change Header Type of PCI Bridge device to Type 1 + * (0x01, used by PCI Bridges) because hardwired value + * is Type 0 (0x00, used by Endpoint devices). + */ + data &= ~0x007f0000; + data |= PCI_HEADER_TYPE_BRIDGE << 16; + } + + *valuep = pci_conv_32_to_size(data, offset, size); + + return 0; + } + + /* * Returning fabricated CRS value (0xFFFF0001) by PCIe Root Complex to * OS is allowed only for 4-byte PCI_VENDOR_ID config read request and * only when CRSSVE bit in Root Port PCIe device is enabled. In all @@ -396,14 +445,14 @@ static int pcie_advk_read_config(const struct udevice *bus, pci_dev_t bdf, /* Program the control register */ reg = advk_readl(pcie, PIO_CTRL); reg &= ~PIO_CTRL_TYPE_MASK; - if (PCI_BUS(bdf) == pcie->first_busno) + if (busno == pcie->sec_busno) reg |= PCIE_CONFIG_RD_TYPE0; else reg |= PCIE_CONFIG_RD_TYPE1; advk_writel(pcie, reg, PIO_CTRL); /* Program the address registers */ - reg = PCIE_BDF(bdf) | PCIE_CONF_REG(offset); + reg = PCIE_BDF(busno, PCI_DEV(bdf), PCI_FUNC(bdf)) | PCIE_CONF_REG(offset); advk_writel(pcie, reg, PIO_ADDR_LS); advk_writel(pcie, 0, PIO_ADDR_MS); @@ -491,7 +540,9 @@ static int pcie_advk_write_config(struct udevice *bus, pci_dev_t bdf, enum pci_size_t size) { struct pcie_advk *pcie = dev_get_priv(bus); + int busno = PCI_BUS(bdf) - dev_seq(bus); int retry_count; + ulong data; uint reg; int ret; @@ -500,11 +551,41 @@ static int pcie_advk_write_config(struct udevice *bus, pci_dev_t bdf, dev_dbg(pcie->dev, "(addr,size,val)=(0x%04x, %d, 0x%08lx)\n", offset, size, value); - if (!pcie_advk_addr_valid(bdf, pcie->first_busno)) { + if (!pcie_advk_addr_valid(pcie, busno, PCI_DEV(bdf), PCI_FUNC(bdf))) { dev_dbg(pcie->dev, "- out of range\n"); return 0; } + /* + * As explained in pcie_advk_read_config(), for the configuration + * space of the primary PCI Bridge, we write the content into virtual + * cache. + */ + if (busno == pcie->first_busno) { + if (offset >= 0x10 && offset < 0x34) { + data = pcie->cfgcache[(offset - 0x10) / 4]; + data = pci_conv_size_to_32(data, value, offset, size); + pcie->cfgcache[(offset - 0x10) / 4] = data; + } else if ((offset & ~3) == PCI_ROM_ADDRESS1) { + data = advk_readl(pcie, PCIE_CORE_EXP_ROM_BAR_REG); + data = pci_conv_size_to_32(data, value, offset, size); + advk_writel(pcie, data, PCIE_CORE_EXP_ROM_BAR_REG); + } else { + data = advk_readl(pcie, offset & ~3); + data = pci_conv_size_to_32(data, value, offset, size); + advk_writel(pcie, data, offset & ~3); + } + + if (offset == PCI_PRIMARY_BUS) + pcie->first_busno = data & 0xff; + + if (offset == PCI_SECONDARY_BUS || + (offset == PCI_PRIMARY_BUS && size != PCI_SIZE_8)) + pcie->sec_busno = (data >> 8) & 0xff; + + return 0; + } + if (advk_readl(pcie, PIO_START)) { dev_err(pcie->dev, "Previous PIO read/write transfer is still running\n"); @@ -514,14 +595,14 @@ static int pcie_advk_write_config(struct udevice *bus, pci_dev_t bdf, /* Program the control register */ reg = advk_readl(pcie, PIO_CTRL); reg &= ~PIO_CTRL_TYPE_MASK; - if (PCI_BUS(bdf) == pcie->first_busno) + if (busno == pcie->sec_busno) reg |= PCIE_CONFIG_WR_TYPE0; else reg |= PCIE_CONFIG_WR_TYPE1; advk_writel(pcie, reg, PIO_CTRL); /* Program the address registers */ - reg = PCIE_BDF(bdf) | PCIE_CONF_REG(offset); + reg = PCIE_BDF(busno, PCI_DEV(bdf), PCI_FUNC(bdf)) | PCIE_CONF_REG(offset); advk_writel(pcie, reg, PIO_ADDR_LS); advk_writel(pcie, 0, PIO_ADDR_MS); dev_dbg(pcie->dev, "\tPIO req. - addr = 0x%08x\n", reg); @@ -590,14 +671,14 @@ static int pcie_advk_wait_for_link(struct pcie_advk *pcie) /* check if the link is up or not */ for (retries = 0; retries < LINK_MAX_RETRIES; retries++) { if (pcie_advk_link_up(pcie)) { - printf("PCIE-%d: Link up\n", pcie->first_busno); + printf("PCIe: Link up\n"); return 0; } udelay(LINK_WAIT_TIMEOUT); } - printf("PCIE-%d: Link down\n", pcie->first_busno); + printf("PCIe: Link down\n"); return -ETIMEDOUT; } @@ -716,6 +797,25 @@ static int pcie_advk_setup_hw(struct pcie_advk *pcie) */ advk_writel(pcie, 0x11ab11ab, VENDOR_ID_REG); + /* + * Change Class Code of PCI Bridge device to PCI Bridge (0x600400), + * because default value is Mass Storage Controller (0x010400), causing + * U-Boot to fail to recognize it as P2P Bridge. + * + * Note that this Aardvark PCI Bridge does not have a compliant Type 1 + * Configuration Space and it even cannot be accessed via Aardvark's + * PCI config space access method. Something like config space is + * available in internal Aardvark registers starting at offset 0x0 + * and is reported as Type 0. In range 0x10 - 0x34 it has totally + * different registers. So our driver reports Header Type as Type 1 and + * for the above mentioned range redirects access to the virtual + * cfgcache[] buffer, which avoids changing internal Aardvark registers. + */ + reg = advk_readl(pcie, PCIE_CORE_DEV_REV_REG); + reg &= ~0xffffff00; + reg |= (PCI_CLASS_BRIDGE_PCI << 8) << 8; + advk_writel(pcie, reg, PCIE_CORE_DEV_REV_REG); + /* Set Advanced Error Capabilities and Control PF0 register */ reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX | PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN | @@ -857,9 +957,14 @@ static int pcie_advk_probe(struct udevice *dev) dev_warn(dev, "PCIE Reset on GPIO support is missing\n"); } - pcie->first_busno = dev_seq(dev); pcie->dev = pci_get_controller(dev); + /* PCI Bridge support 32-bit I/O and 64-bit prefetch mem addressing */ + pcie->cfgcache[(PCI_IO_BASE - 0x10) / 4] = + PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8); + pcie->cfgcache[(PCI_PREF_MEMORY_BASE - 0x10) / 4] = + PCI_PREF_RANGE_TYPE_64 | (PCI_PREF_RANGE_TYPE_64 << 16); + return pcie_advk_setup_hw(pcie); } |