diff options
author | Grzegorz Jaszczyk <jaz@semihalf.com> | 2018-04-03 17:59:12 +0300 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2021-04-29 08:45:24 +0300 |
commit | 2e28b597fa4ce409cf0e4ed9f3479838930a8e6c (patch) | |
tree | b5b2a1be03627b845df9323a593be568fd8f504c /drivers/phy/marvell | |
parent | f635c3b3a2827a9de3ecceaad6e5dfa595580ac6 (diff) | |
download | u-boot-2e28b597fa4ce409cf0e4ed9f3479838930a8e6c.tar.xz |
phy: marvell: cp110: let the firmware perform training for XFI
Replace the XFI training with appropriate SMC call, so the firmware will
perform exact initialization.
Update Stefan 2021-03-23:
Move comphy_smc() function to an earlier place - necessary for the
mainline merge.
Change-Id: I789b130b05529dc80dadcf66aef407d93595b762
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Igal Liberman <igall@marvell.com>
Diffstat (limited to 'drivers/phy/marvell')
-rw-r--r-- | drivers/phy/marvell/comphy_cp110.c | 197 |
1 files changed, 18 insertions, 179 deletions
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index cbfc89cb0c..e71b704284 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR; #define MV_SIP_COMPHY_POWER_ON 0x82000001 #define MV_SIP_COMPHY_POWER_OFF 0x82000002 #define MV_SIP_COMPHY_PLL_LOCK 0x82000003 +#define MV_SIP_COMPHY_XFI_TRAIN 0x82000004 /* Used to distinguish between different possible callers (U-boot/Linux) */ #define COMPHY_CALLER_UBOOT (0x1 << 21) @@ -133,90 +134,24 @@ static u32 polling_with_timeout(void __iomem *addr, u32 val, return 0; } -/* This function performs RX training for single FFE value. - * The result of the RX training is located in: - * Saved DFE values Register[10:15]. - * - * The result is returned to the caller using *result - * - * Return '1' on succsess. - * Return '0' on failure. - */ -static int comphy_cp110_test_single_ffe( - struct chip_serdes_phy_config *ptr_chip_cfg, - u32 lane, u32 ffe, u32 *result) +static int comphy_smc(u32 function_id, void __iomem *comphy_base_addr, + u32 lane, u32 mode) { - u32 mask, data, timeout; - void __iomem *hpipe_base_addr = ptr_chip_cfg->hpipe3_base_addr; - void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base_addr, lane); - void __iomem *sd_ip_addr = SD_ADDR(hpipe_base_addr, lane); - - /* Configure PRBS counters */ - mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK; - data = 0xe << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET; - reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask); - - mask = HPIPE_PHY_TEST_DATA_MASK; - data = 0x64 << HPIPE_PHY_TEST_DATA_OFFSET; - reg_set(hpipe_addr + HPIPE_PHY_TEST_DATA_REG, data, mask); - - mask = HPIPE_PHY_TEST_EN_MASK; - data = 0x1 << HPIPE_PHY_TEST_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask); - - mdelay(50); - - /* Set the FFE value */ - mask = HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK; - data = ffe << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET; - reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask); - - /* Start RX training */ - mask = SD_EXTERNAL_STATUS_START_RX_TRAINING_MASK; - data = 1 << SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET; - reg_set(sd_ip_addr + SD_EXTERNAL_STATUS_REG, data, mask); - - /* Check the result of RX training */ - timeout = RX_TRAINING_TIMEOUT; - while (timeout) { - data = readl(sd_ip_addr + SD_EXTERNAL_STATUS1_REG); - if (data & SD_EXTERNAL_STATUS1_REG_RX_TRAIN_COMP_MASK) - break; - mdelay(1); - timeout--; - } - - if (timeout == 0) - return 0; - - if (data & SD_EXTERNAL_STATUS1_REG_RX_TRAIN_FAILED_MASK) - return 0; - - /* Stop RX training */ - mask = SD_EXTERNAL_STATUS_START_RX_TRAINING_MASK; - data = 0 << SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET; - reg_set(sd_ip_addr + SD_EXTERNAL_STATUS_REG, data, mask); - - /* Read the result */ - data = readl(hpipe_addr + HPIPE_SAVED_DFE_VALUES_REG); - data &= HPIPE_SAVED_DFE_VALUES_SAV_F0D_MASK; - data >>= HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET; - *result = data; - - printf("FFE = %d, result = 0x%x\n", ffe, *result); + struct pt_regs pregs = {0}; - /* Clear the PRBS counters */ - mask = HPIPE_PHY_TEST_RESET_MASK; - data = 0x1 << HPIPE_PHY_TEST_RESET_OFFSET; - mask |= HPIPE_PHY_TEST_EN_MASK; - data |= 0x0 << HPIPE_PHY_TEST_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask); + pregs.regs[0] = function_id; + pregs.regs[1] = (unsigned long)comphy_base_addr; + pregs.regs[2] = lane; + pregs.regs[3] = mode; - mask = HPIPE_PHY_TEST_RESET_MASK; - data = 0x0 << HPIPE_PHY_TEST_RESET_OFFSET; - reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask); + smc_call(&pregs); - return 1; + /* + * TODO: Firmware return 0 on success, temporary map it to u-boot + * convention, but after all comphy will be reworked the convention in + * u-boot should be change and this conversion removed + */ + return pregs.regs[0] ? 0 : 1; } /* This function performs RX training for all FFE possible values. @@ -229,10 +164,6 @@ static int comphy_cp110_test_single_ffe( int comphy_cp110_sfi_rx_training(struct chip_serdes_phy_config *ptr_chip_cfg, u32 lane) { - u32 mask, data, i, rx_train_result; - u32 max_rx_train = 0, max_rx_train_index = 0; - void __iomem *hpipe_base_addr = ptr_chip_cfg->hpipe3_base_addr; - void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base_addr, lane); int ret; debug_enter(); @@ -242,107 +173,15 @@ int comphy_cp110_sfi_rx_training(struct chip_serdes_phy_config *ptr_chip_cfg, return 0; } - /* Configure SQ threshold and CDR lock */ - mask = HPIPE_SQUELCH_THRESH_IN_MASK; - data = 0xc << HPIPE_SQUELCH_THRESH_IN_OFFSET; - reg_set(hpipe_addr + HPIPE_SQUELCH_FFE_SETTING_REG, data, mask); - - mask = HPIPE_SQ_DEGLITCH_WIDTH_P_MASK; - data = 0xf << HPIPE_SQ_DEGLITCH_WIDTH_P_OFFSET; - mask |= HPIPE_SQ_DEGLITCH_WIDTH_N_MASK; - data |= 0xf << HPIPE_SQ_DEGLITCH_WIDTH_N_OFFSET; - mask |= HPIPE_SQ_DEGLITCH_EN_MASK; - data |= 0x1 << HPIPE_SQ_DEGLITCH_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_SQ_GLITCH_FILTER_CTRL, data, mask); - - mask = HPIPE_CDR_LOCK_DET_EN_MASK; - data = 0x1 << HPIPE_CDR_LOCK_DET_EN_OFFSET; - reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask); - - udelay(100); - - /* Determine if we have a cable attached to this comphy, if not, - * we can't perform RX training. - */ - data = readl(hpipe_addr + HPIPE_SQUELCH_FFE_SETTING_REG); - if (data & HPIPE_SQUELCH_DETECTED_MASK) { - pr_err("Squelsh is not detected, can't perform RX training\n"); - return 0; - } - - data = readl(hpipe_addr + HPIPE_LOOPBACK_REG); - if (!(data & HPIPE_CDR_LOCK_MASK)) { - pr_err("CDR is not locked, can't perform RX training\n"); - return 0; - } - - /* Do preparations for RX training */ - mask = HPIPE_DFE_RES_FORCE_MASK; - data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET; - reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask); - - mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK; - data = 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET; - mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK; - data |= 1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET; - reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask); - - /* Performs RX training for all possible FFE (Feed Forward - * Equalization, possible values are 0-7). - * We update the best value reached and the FFE which gave this value. - */ - for (i = 0; i < MAX_NUM_OF_FFE; i++) { - rx_train_result = 0; - ret = comphy_cp110_test_single_ffe(ptr_chip_cfg, lane, - i, &rx_train_result); - - if (ret && (rx_train_result > max_rx_train)) { - max_rx_train = rx_train_result; - max_rx_train_index = i; - } - } - - /* If we were able to determine which FFE gives the best value, - * now we need to set it and run RX training again (only for this - * FFE). - */ - if (max_rx_train) { - ret = comphy_cp110_test_single_ffe(ptr_chip_cfg, lane, - max_rx_train_index, - &rx_train_result); - if (ret == 1) - printf("RX Training passed(FFE = %d, result = 0x%x)\n", - max_rx_train_index, rx_train_result); - } else { - pr_err("RX training failed\n"); - ret = 0; - } + /* Mode is not relevant for xfi training */ + ret = comphy_smc(MV_SIP_COMPHY_XFI_TRAIN, + ptr_chip_cfg->comphy_base_addr, lane, 0); debug_exit(); return ret; } -static int comphy_smc(u32 function_id, void __iomem *comphy_base_addr, - u32 lane, u32 mode) -{ - struct pt_regs pregs = {0}; - - pregs.regs[0] = function_id; - pregs.regs[1] = (unsigned long)comphy_base_addr; - pregs.regs[2] = lane; - pregs.regs[3] = mode; - - smc_call(&pregs); - - /* - * TODO: Firmware return 0 on success, temporary map it to u-boot - * convention, but after all comphy will be reworked the convention in - * u-boot should be change and this conversion removed - */ - return pregs.regs[0] ? 0 : 1; -} - static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base, void __iomem *comphy_base_addr, int cp_index, u32 type) |