sunxi: usb: convert PHY GPIO functions to DM

The Allwinner USB PHY driver is still using the legacy GPIO interface,
which is now implemented by the DM_GPIO compat functions.
Those seem to have some design flaws, as setting the direction, then
later setting the value will not work, if the DM_GPIO driver is
implementing set_flags.

Fix this by using the dm_ version of the direct GPIO interface, which
uses struct gpio_desc structs to handle requested GPIOs, and actually
keeps the flags we set earlier.

This fixes USB operation on boards which need to toggle the VBUS supply
via a GPIO, like the Teres-I laptop or the BananaPi M2 Berry board.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Milan P. Stanić <mps@arvanta.net>
Reviewed-by: Samuel Holland <samuel@sholland.org>

1 files changed, 33 insertions, 26 deletions

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 86c589a65f..aef2cb8f6f 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -125,9 +125,9 @@ struct sun4i_usb_phy_info {
 
 struct sun4i_usb_phy_plat {
 	void __iomem *pmu;
-	int gpio_vbus;
-	int gpio_vbus_det;
-	int gpio_id_det;
+	struct gpio_desc gpio_vbus;
+	struct gpio_desc gpio_vbus_det;
+	struct gpio_desc gpio_id_det;
 	struct clk clocks;
 	struct reset_ctl resets;
 	int id;
@@ -224,8 +224,8 @@ static int sun4i_usb_phy_power_on(struct phy *phy)
 		initial_usb_scan_delay = 0;
 	}
 
-	if (usb_phy->gpio_vbus >= 0)
-		gpio_set_value(usb_phy->gpio_vbus, SUNXI_GPIO_PULL_UP);
+	if (dm_gpio_is_valid(&usb_phy->gpio_vbus))
+		dm_gpio_set_value(&usb_phy->gpio_vbus, 1);
 
 	return 0;
 }
@@ -235,8 +235,8 @@ static int sun4i_usb_phy_power_off(struct phy *phy)
 	struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
 	struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
 
-	if (usb_phy->gpio_vbus >= 0)
-		gpio_set_value(usb_phy->gpio_vbus, SUNXI_GPIO_PULL_DISABLE);
+	if (dm_gpio_is_valid(&usb_phy->gpio_vbus))
+		dm_gpio_set_value(&usb_phy->gpio_vbus, 0);
 
 	return 0;
 }
@@ -386,8 +386,8 @@ int sun4i_usb_phy_vbus_detect(struct phy *phy)
 	struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
 	int err = 1, retries = 3;
 
-	if (usb_phy->gpio_vbus_det >= 0) {
-		err = gpio_get_value(usb_phy->gpio_vbus_det);
+	if (dm_gpio_is_valid(&usb_phy->gpio_vbus_det)) {
+		err = dm_gpio_get_value(&usb_phy->gpio_vbus_det);
 		/*
 		 * Vbus may have been provided by the board and just turned off
 		 * some milliseconds ago on reset. What we're measuring then is
@@ -395,7 +395,7 @@ int sun4i_usb_phy_vbus_detect(struct phy *phy)
 		 */
 		while (err > 0 && retries--) {
 			mdelay(100);
-			err = gpio_get_value(usb_phy->gpio_vbus_det);
+			err = dm_gpio_get_value(&usb_phy->gpio_vbus_det);
 		}
 	} else if (data->vbus_power_supply) {
 		err = regulator_get_enable(data->vbus_power_supply);
@@ -409,10 +409,10 @@ int sun4i_usb_phy_id_detect(struct phy *phy)
 	struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
 	struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
 
-	if (usb_phy->gpio_id_det < 0)
-		return usb_phy->gpio_id_det;
+	if (!dm_gpio_is_valid(&usb_phy->gpio_id_det))
+		return -1;
 
-	return gpio_get_value(usb_phy->gpio_id_det);
+	return dm_gpio_get_value(&usb_phy->gpio_id_det);
 }
 
 void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled)
@@ -454,35 +454,42 @@ static int sun4i_usb_phy_probe(struct udevice *dev)
 		if (data->cfg->missing_phys & BIT(i))
 			continue;
 
-		phy->gpio_vbus = sunxi_name_to_gpio(info->gpio_vbus);
-		if (phy->gpio_vbus >= 0) {
-			ret = gpio_request(phy->gpio_vbus, "usb_vbus");
+		ret = dm_gpio_lookup_name(info->gpio_vbus, &phy->gpio_vbus);
+		if (ret == 0) {
+			ret = dm_gpio_request(&phy->gpio_vbus, "usb_vbus");
 			if (ret)
 				return ret;
-			ret = gpio_direction_output(phy->gpio_vbus, 0);
+			ret = dm_gpio_set_dir_flags(&phy->gpio_vbus,
+						    GPIOD_IS_OUT);
+			if (ret)
+				return ret;
+			ret = dm_gpio_set_value(&phy->gpio_vbus, 0);
 			if (ret)
 				return ret;
 		}
 
-		phy->gpio_vbus_det = sunxi_name_to_gpio(info->gpio_vbus_det);
-		if (phy->gpio_vbus_det >= 0) {
-			ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
+		ret = dm_gpio_lookup_name(info->gpio_vbus_det,
+					  &phy->gpio_vbus_det);
+		if (ret == 0) {
+			ret = dm_gpio_request(&phy->gpio_vbus_det,
+					      "usb_vbus_det");
 			if (ret)
 				return ret;
-			ret = gpio_direction_input(phy->gpio_vbus_det);
+			ret = dm_gpio_set_dir_flags(&phy->gpio_vbus_det,
+						    GPIOD_IS_IN);
 			if (ret)
 				return ret;
 		}
 
-		phy->gpio_id_det = sunxi_name_to_gpio(info->gpio_id_det);
-		if (phy->gpio_id_det >= 0) {
-			ret = gpio_request(phy->gpio_id_det, "usb_id_det");
+		ret = dm_gpio_lookup_name(info->gpio_id_det, &phy->gpio_id_det);
+		if (ret == 0) {
+			ret = dm_gpio_request(&phy->gpio_id_det, "usb_id_det");
 			if (ret)
 				return ret;
-			ret = gpio_direction_input(phy->gpio_id_det);
+			ret = dm_gpio_set_dir_flags(&phy->gpio_id_det,
+						GPIOD_IS_IN | GPIOD_PULL_UP);
 			if (ret)
 				return ret;
-			sunxi_gpio_set_pull(phy->gpio_id_det, SUNXI_GPIO_PULL_UP);
 		}
 
 		if (data->cfg->dedicated_clocks)