diff options
| author | Patrick Delaunay <patrick.delaunay@st.com> | 2019-07-30 20:16:11 +0300 |
|---|---|---|
| committer | Patrice Chotard <patrice.chotard@st.com> | 2019-08-27 10:36:56 +0300 |
| commit | abee80d78933e8b21dc2bcafa6de8e69ee2253d7 (patch) | |
| tree | 5370df591e12f6069e27c669eb0e549514cc3d91 /drivers/pinctrl | |
| parent | 73858264758f00b981fd126ab705db04a851656d (diff) | |
| download | u-boot-abee80d78933e8b21dc2bcafa6de8e69ee2253d7.tar.xz | |
pinctrl: stmfx: update pinconf settings
Alignment with kernel driver.
According to the following tab (coming from STMFX datasheet), updates
have to done in stmfx_pinctrl_conf_set function:
-"type" has to be set when "bias" is configured as "pull-up or pull-down"
-PIN_CONFIG_DRIVE_PUSH_PULL should only be used when gpio is configured as
output. There is so no need to check direction.
DIR | TYPE | PUPD | MFX GPIO configuration
----|------|------|---------------------------------------------------
1 | 1 | 1 | OUTPUT open drain with internal pull-up resistor
----|------|------|---------------------------------------------------
1 | 1 | 0 | OUTPUT open drain with internal pull-down resistor
----|------|------|---------------------------------------------------
1 | 0 | 0/1 | OUTPUT push pull no pull
----|------|------|---------------------------------------------------
0 | 1 | 1 | INPUT with internal pull-up resistor
----|------|------|---------------------------------------------------
0 | 1 | 0 | INPUT with internal pull-down resistor
----|------|------|---------------------------------------------------
0 | 0 | 1 | INPUT floating
----|------|------|---------------------------------------------------
0 | 0 | 0 | analog (GPIO not used, default setting)
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Diffstat (limited to 'drivers/pinctrl')
| -rw-r--r-- | drivers/pinctrl/pinctrl-stmfx.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c index 5431df9813..0b5a0433cd 100644 --- a/drivers/pinctrl/pinctrl-stmfx.c +++ b/drivers/pinctrl/pinctrl-stmfx.c @@ -231,23 +231,23 @@ static int stmfx_pinctrl_conf_set(struct udevice *dev, unsigned int pin, switch (param) { case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_DRIVE_PUSH_PULL: + ret = stmfx_pinctrl_set_type(dev, pin, 0); + break; case PIN_CONFIG_BIAS_PULL_DOWN: + ret = stmfx_pinctrl_set_type(dev, pin, 1); + if (ret) + return ret; ret = stmfx_pinctrl_set_pupd(dev, pin, 0); break; case PIN_CONFIG_BIAS_PULL_UP: + ret = stmfx_pinctrl_set_type(dev, pin, 1); + if (ret) + return ret; ret = stmfx_pinctrl_set_pupd(dev, pin, 1); break; case PIN_CONFIG_DRIVE_OPEN_DRAIN: - if (dir == GPIOF_OUTPUT) - ret = stmfx_pinctrl_set_type(dev, pin, 1); - else - ret = stmfx_pinctrl_set_type(dev, pin, 0); - break; - case PIN_CONFIG_DRIVE_PUSH_PULL: - if (dir == GPIOF_OUTPUT) - ret = stmfx_pinctrl_set_type(dev, pin, 0); - else - ret = stmfx_pinctrl_set_type(dev, pin, 1); + ret = stmfx_pinctrl_set_type(dev, pin, 1); break; case PIN_CONFIG_OUTPUT: ret = stmfx_gpio_direction_output(plat->gpio, pin, arg); |