x86: apl: Add pinctrl driver

Add a driver for the Apollo Lake pinctrl. This mostly makes use of the
common Intel pinctrl support.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

3 files changed, 206 insertions, 3 deletions

diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig
index c01c6244d9..e62a2e0349 100644
--- a/drivers/pinctrl/intel/Kconfig
+++ b/drivers/pinctrl/intel/Kconfig
@@ -5,12 +5,22 @@
 if PINCTRL_INTEL
 
 config INTEL_PINCTRL_DUAL_ROUTE_SUPPORT
-	def_bool y
+	bool
+	default y
 
 config INTEL_PINCTRL_PADCFG_PADTOL
-	def_bool n
+	bool n
 
 config INTEL_PINCTRL_IOSTANDBY
-	def_bool y
+	bool
+	default y
+
+config PINCTRL_INTEL_APL
+	bool "Support Intel Apollo Lake (APL)"
+	help
+	  Add support for Intel Apollo Lake pin-control and pin-mux settings.
+	  These are mostly read from the device tree, with the early-pads
+	  property in the host bridge and the pads property in the fsp-s
+	  subnode of the host bridge.
 
 endif
diff --git a/drivers/pinctrl/intel/Makefile b/drivers/pinctrl/intel/Makefile
index bc1aad2c06..3aed8e9663 100644
--- a/drivers/pinctrl/intel/Makefile
+++ b/drivers/pinctrl/intel/Makefile
@@ -3,3 +3,4 @@
 # Copyright 2019 Google LLC
 
 obj-y += pinctrl.o
+obj-$(CONFIG_PINCTRL_INTEL_APL) += pinctrl_apl.o
diff --git a/drivers/pinctrl/intel/pinctrl_apl.c b/drivers/pinctrl/intel/pinctrl_apl.c
new file mode 100644
index 0000000000..bd80435ffa
--- /dev/null
+++ b/drivers/pinctrl/intel/pinctrl_apl.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Intel Corp.
+ * Copyright 2019 Google LLC
+ *
+ * Taken partly from coreboot gpio.c
+ */
+
+#define LOG_CATEGORY UCLASS_GPIO
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <p2sb.h>
+#include <asm/intel_pinctrl.h>
+#include <asm-generic/gpio.h>
+#include <asm/intel_pinctrl_defs.h>
+
+/**
+ * struct apl_gpio_platdata - platform data for each device
+ *
+ * @dtplat: of-platdata data from C struct
+ */
+struct apl_gpio_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	/* Put this first since driver model will copy the data here */
+	struct dtd_intel_apl_pinctrl dtplat;
+#endif
+};
+
+static const struct reset_mapping rst_map[] = {
+	{ .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 },
+	{ .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 },
+	{ .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 },
+};
+
+/* Groups for each community */
+static const struct pad_group apl_community_n_groups[] = {
+	INTEL_GPP(N_OFFSET, N_OFFSET, GPIO_31),		/* NORTH 0 */
+	INTEL_GPP(N_OFFSET, GPIO_32, JTAG_TRST_B),	/* NORTH 1 */
+	INTEL_GPP(N_OFFSET, JTAG_TMS, SVID0_CLK),	/* NORTH 2 */
+};
+
+static const struct pad_group apl_community_w_groups[] = {
+	INTEL_GPP(W_OFFSET, W_OFFSET, OSC_CLK_OUT_1),	/* WEST 0 */
+	INTEL_GPP(W_OFFSET, OSC_CLK_OUT_2, SUSPWRDNACK),/* WEST 1 */
+};
+
+static const struct pad_group apl_community_sw_groups[] = {
+	INTEL_GPP(SW_OFFSET, SW_OFFSET, SMB_ALERTB),	/* SOUTHWEST 0 */
+	INTEL_GPP(SW_OFFSET, SMB_CLK, LPC_FRAMEB),	/* SOUTHWEST 1 */
+};
+
+static const struct pad_group apl_community_nw_groups[] = {
+	INTEL_GPP(NW_OFFSET, NW_OFFSET, PROCHOT_B),	/* NORTHWEST 0 */
+	INTEL_GPP(NW_OFFSET, PMIC_I2C_SCL, GPIO_106),	/* NORTHWEST 1 */
+	INTEL_GPP(NW_OFFSET, GPIO_109, GPIO_123),	/* NORTHWEST 2 */
+};
+
+/* TODO(sjg@chromium.org): Consider moving this to device tree */
+static const struct pad_community apl_gpio_communities[] = {
+	{
+		.port = PID_GPIO_N,
+		.first_pad = N_OFFSET,
+		.last_pad = SVID0_CLK,
+		.num_gpi_regs = NUM_N_GPI_REGS,
+		.gpi_status_offset = NUM_NW_GPI_REGS + NUM_W_GPI_REGS
+			+ NUM_SW_GPI_REGS,
+		.pad_cfg_base = PAD_CFG_BASE,
+		.host_own_reg_0 = HOSTSW_OWN_REG_0,
+		.gpi_int_sts_reg_0 = GPI_INT_STS_0,
+		.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+		.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+		.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+		.name = "GPIO_GPE_N",
+		.acpi_path = "\\_SB.GPO0",
+		.reset_map = rst_map,
+		.num_reset_vals = ARRAY_SIZE(rst_map),
+		.groups = apl_community_n_groups,
+		.num_groups = ARRAY_SIZE(apl_community_n_groups),
+	}, {
+		.port = PID_GPIO_NW,
+		.first_pad = NW_OFFSET,
+		.last_pad = GPIO_123,
+		.num_gpi_regs = NUM_NW_GPI_REGS,
+		.gpi_status_offset = NUM_W_GPI_REGS + NUM_SW_GPI_REGS,
+		.pad_cfg_base = PAD_CFG_BASE,
+		.host_own_reg_0 = HOSTSW_OWN_REG_0,
+		.gpi_int_sts_reg_0 = GPI_INT_STS_0,
+		.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+		.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+		.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+		.name = "GPIO_GPE_NW",
+		.acpi_path = "\\_SB.GPO1",
+		.reset_map = rst_map,
+		.num_reset_vals = ARRAY_SIZE(rst_map),
+		.groups = apl_community_nw_groups,
+		.num_groups = ARRAY_SIZE(apl_community_nw_groups),
+	}, {
+		.port = PID_GPIO_W,
+		.first_pad = W_OFFSET,
+		.last_pad = SUSPWRDNACK,
+		.num_gpi_regs = NUM_W_GPI_REGS,
+		.gpi_status_offset = NUM_SW_GPI_REGS,
+		.pad_cfg_base = PAD_CFG_BASE,
+		.host_own_reg_0 = HOSTSW_OWN_REG_0,
+		.gpi_int_sts_reg_0 = GPI_INT_STS_0,
+		.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+		.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+		.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+		.name = "GPIO_GPE_W",
+		.acpi_path = "\\_SB.GPO2",
+		.reset_map = rst_map,
+		.num_reset_vals = ARRAY_SIZE(rst_map),
+		.groups = apl_community_w_groups,
+		.num_groups = ARRAY_SIZE(apl_community_w_groups),
+	}, {
+		.port = PID_GPIO_SW,
+		.first_pad = SW_OFFSET,
+		.last_pad = LPC_FRAMEB,
+		.num_gpi_regs = NUM_SW_GPI_REGS,
+		.gpi_status_offset = 0,
+		.pad_cfg_base = PAD_CFG_BASE,
+		.host_own_reg_0 = HOSTSW_OWN_REG_0,
+		.gpi_int_sts_reg_0 = GPI_INT_STS_0,
+		.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+		.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+		.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+		.name = "GPIO_GPE_SW",
+		.acpi_path = "\\_SB.GPO3",
+		.reset_map = rst_map,
+		.num_reset_vals = ARRAY_SIZE(rst_map),
+		.groups = apl_community_sw_groups,
+		.num_groups = ARRAY_SIZE(apl_community_sw_groups),
+	},
+};
+
+static int apl_pinctrl_ofdata_to_platdata(struct udevice *dev)
+{
+	struct p2sb_child_platdata *pplat;
+	const struct pad_community *comm = NULL;
+	int i;
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+	int ret;
+
+	/*
+	 * It would be nice to do this in the bind() method, but with
+	 * of-platdata binding happens in the order that DM finds things in the
+	 * linker list (i.e. alphabetical order by driver name). So the GPIO
+	 * device may well be bound before its parent (p2sb), and this call
+	 * will fail if p2sb is not bound yet.
+	 *
+	 * TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc
+	 */
+	ret = p2sb_set_port_id(dev, plat->dtplat.intel_p2sb_port_id);
+	if (ret)
+		return log_msg_ret("Could not set port id", ret);
+#endif
+	/* Attach this device to its community structure */
+	pplat = dev_get_parent_platdata(dev);
+	for (i = 0; i < ARRAY_SIZE(apl_gpio_communities); i++) {
+		if (apl_gpio_communities[i].port == pplat->pid)
+			comm = &apl_gpio_communities[i];
+	}
+
+	return intel_pinctrl_ofdata_to_platdata(dev, comm, 2);
+}
+
+static const struct udevice_id apl_gpio_ids[] = {
+	{ .compatible = "intel,apl-pinctrl"},
+	{ }
+};
+
+U_BOOT_DRIVER(apl_pinctrl_drv) = {
+	.name		= "intel_apl_pinctrl",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= apl_gpio_ids,
+	.probe		= intel_pinctrl_probe,
+	.ops		= &intel_pinctrl_ops,
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	.bind		= dm_scan_fdt_dev,
+#endif
+	.ofdata_to_platdata = apl_pinctrl_ofdata_to_platdata,
+	.priv_auto_alloc_size = sizeof(struct intel_pinctrl_priv),
+	.platdata_auto_alloc_size = sizeof(struct apl_gpio_platdata),
+};