diff options
author | Vikas Manocha <vikas.manocha@st.com> | 2014-11-21 21:34:21 +0300 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-12-08 17:35:44 +0300 |
commit | d2ca9fd2cd74e8346827af111ceb249a7fd44637 (patch) | |
tree | 0e88ea05d55d4082adf223821418af795fcbc970 /drivers/serial/serial_pl01x.c | |
parent | 2df810717e8737b9c4a7d2a93b0100fcd7eae84f (diff) | |
download | u-boot-d2ca9fd2cd74e8346827af111ceb249a7fd44637.tar.xz |
serial: pl01x: move all line control at same place
Receive line control uses same setting as transmit line control, also one lcrh
write is effective for both baud rate & receive line control internal update.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Acked-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'drivers/serial/serial_pl01x.c')
-rw-r--r-- | drivers/serial/serial_pl01x.c | 44 |
1 files changed, 21 insertions, 23 deletions
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index a58ad8ab36..fb11210e4c 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -72,8 +72,6 @@ static int pl01x_tstc(struct pl01x_regs *regs) static int pl01x_generic_serial_init(struct pl01x_regs *regs, enum pl01x_type type) { - unsigned int lcr; - #ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT if (type == TYPE_PL011) { /* Empty RX fifo if necessary */ @@ -87,15 +85,28 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs, /* First, disable everything */ writel(0, ®s->pl010_cr); - /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ - lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; - writel(lcr, ®s->pl011_lcrh); - switch (type) { case TYPE_PL010: break; - case TYPE_PL011: { + case TYPE_PL011: + break; + default: + return -EINVAL; + } + + return 0; +} + +static int set_line_control(struct pl01x_regs *regs) +{ + unsigned int lcr; + /* + * Internal update of baud rate register require line + * control register write + */ + lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; #ifdef CONFIG_PL011_SERIAL_RLCR + { int i; /* @@ -107,22 +118,15 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs, writel(lcr, ®s->fr); writel(lcr, ®s->pl011_rlcr); - /* lcrh needs to be set again for change to be effective */ - writel(lcr, ®s->pl011_lcrh); -#endif - break; - } - default: - return -EINVAL; } - +#endif + writel(lcr, ®s->pl011_lcrh); return 0; } static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, int clock, int baudrate) { - unsigned int lcr; switch (type) { case TYPE_PL010: { unsigned int divisor; @@ -176,13 +180,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, writel(divider, ®s->pl011_ibrd); writel(fraction, ®s->pl011_fbrd); - /* - * Internal update of baud rate register require line - * control register write - */ - lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; - writel(lcr, ®s->pl011_lcrh); - + set_line_control(regs); /* Finally, enable the UART */ writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr); |