diff options
| author | Rasmus Villemoes <rasmus.villemoes@prevas.dk> | 2020-02-11 18:20:24 +0300 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2020-03-31 17:06:52 +0300 |
| commit | 1a7b462dee310e83b5ed45ff5a56aa348d07b03a (patch) | |
| tree | 684bcaae0558cabf14d31eb8a93e0a6707a31893 /drivers/spi | |
| parent | 96e68c1621a416cf5b1e933206d23ff86b246fb4 (diff) | |
| download | u-boot-1a7b462dee310e83b5ed45ff5a56aa348d07b03a.tar.xz | |
mpc8xxx_spi: put max_cs to use
Currently, max_cs is write-only; it's just set in
mpc8xxx_spi_ofdata_to_platdata and not otherwise used.
My mpc8309 was always resetting during an "sf probe 0". It turns out
dm_gpio_set_dir_flags() was being called with garbage, since nothing
had initialized priv->gpios[0] - our device tree used "cs-gpios"
rather than "gpios", so gpio_request_list_by_name() had returned 0.
That would have been a lot easier to figure out if the chip select
index was sanity checked, so rename max_cs to cs_count, and reject a
xfer with a too large cs index.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/mpc8xxx_spi.c | 9 |
1 files changed, 7 insertions, 2 deletions
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c index 1c7bf10f91..ac4d0a9bae 100644 --- a/drivers/spi/mpc8xxx_spi.c +++ b/drivers/spi/mpc8xxx_spi.c @@ -35,7 +35,7 @@ enum { struct mpc8xxx_priv { spi8xxx_t *spi; struct gpio_desc gpios[16]; - int max_cs; + int cs_count; }; static inline u32 to_prescale_mod(u32 val) @@ -74,7 +74,7 @@ static int mpc8xxx_spi_ofdata_to_platdata(struct udevice *dev) if (ret < 0) return -EINVAL; - priv->max_cs = ret; + priv->cs_count = ret; return 0; } @@ -131,6 +131,11 @@ static int mpc8xxx_spi_xfer(struct udevice *dev, uint bitlen, debug("%s: slave %s:%u dout %08X din %08X bitlen %u\n", __func__, bus->name, platdata->cs, *(uint *)dout, *(uint *)din, bitlen); + if (platdata->cs >= priv->cs_count) { + dev_err(dev, "chip select index %d too large (cs_count=%d)\n", + platdata->cs, priv->cs_count); + return -EINVAL; + } if (flags & SPI_XFER_BEGIN) mpc8xxx_spi_cs_activate(dev); |