diff options
author | T Karthik Reddy <t.karthik.reddy@xilinx.com> | 2020-02-04 15:47:44 +0300 |
---|---|---|
committer | Michal Simek <michal.simek@xilinx.com> | 2020-10-27 10:13:32 +0300 |
commit | b79a7030c31d4fdc3d37e41391a8272bc7f0f21a (patch) | |
tree | 2c979123c3c620422d311cc51d8f6734be7ddfb2 /drivers/spi | |
parent | 6c9662df49abeefffe9987cb51f47c41b8457d10 (diff) | |
download | u-boot-b79a7030c31d4fdc3d37e41391a8272bc7f0f21a.tar.xz |
spi: zynq_spi: Use clk subsystem to get reference spi clk
Remove fixed reference clk used by plat->frequency and use clk
subsystem to get reference clk. As per spi dt bindings
"spi-max-frequency" property should be used by the slave devices.
This property is read by spi-uclass driver for the slave device.
So avoid reading above property from the platform driver.
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/zynq_spi.c | 35 |
1 files changed, 28 insertions, 7 deletions
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c index 9923931e36..cb911c34f6 100644 --- a/drivers/spi/zynq_spi.c +++ b/drivers/spi/zynq_spi.c @@ -8,10 +8,12 @@ #include <common.h> #include <dm.h> +#include <dm/device_compat.h> #include <log.h> #include <malloc.h> #include <spi.h> #include <time.h> +#include <clk.h> #include <asm/io.h> #include <linux/bitops.h> #include <linux/delay.h> @@ -79,17 +81,10 @@ static int zynq_spi_ofdata_to_platdata(struct udevice *bus) plat->regs = dev_read_addr_ptr(bus); - /* FIXME: Use 250MHz as a suitable default */ - plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", - 250000000); plat->deactivate_delay_us = fdtdec_get_int(blob, node, "spi-deactivate-delay", 0); plat->activate_delay_us = fdtdec_get_int(blob, node, "spi-activate-delay", 0); - plat->speed_hz = plat->frequency / 2; - - debug("%s: regs=%p max-frequency=%d\n", __func__, - plat->regs, plat->frequency); return 0; } @@ -128,13 +123,39 @@ static int zynq_spi_probe(struct udevice *bus) { struct zynq_spi_platdata *plat = dev_get_platdata(bus); struct zynq_spi_priv *priv = dev_get_priv(bus); + struct clk clk; + unsigned long clock; + int ret; priv->regs = plat->regs; priv->fifo_depth = ZYNQ_SPI_FIFO_DEPTH; + ret = clk_get_by_name(bus, "ref_clk", &clk); + if (ret < 0) { + dev_err(bus, "failed to get clock\n"); + return ret; + } + + clock = clk_get_rate(&clk); + if (IS_ERR_VALUE(clock)) { + dev_err(bus, "failed to get rate\n"); + return clock; + } + + ret = clk_enable(&clk); + if (ret && ret != -ENOSYS) { + dev_err(bus, "failed to enable clock\n"); + return ret; + } + /* init the zynq spi hw */ zynq_spi_init_hw(priv); + plat->frequency = clock; + plat->speed_hz = plat->frequency / 2; + + debug("%s: max-frequency=%d\n", __func__, plat->speed_hz); + return 0; } |