diff options
author | Tom Rini <trini@konsulko.com> | 2020-06-25 16:33:39 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2020-06-25 16:33:39 +0300 |
commit | f0e236c8d6646f6ef0ebf8f043962a07dda3b3a3 (patch) | |
tree | 393f3a5a757c2faf8e1506a6a94e70d253b591dd /drivers/spi | |
parent | 6ccbd1590fb15b673c90c9ccde5da8dcaaf80a10 (diff) | |
parent | b8fd54d62f92658cbd20ca051304e13eabf24ddd (diff) | |
download | u-boot-f0e236c8d6646f6ef0ebf8f043962a07dda3b3a3.tar.xz |
Merge tag 'xilinx-for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next
Xilinx changes for v2020.10
Versal:
- xspi bootmode fix
- Removing one clock from clk driver
- Align u-boot memory setting with OS by default
- Map TCM and OCM by default
ZynqMP:
- Minor DT improvements
- Reduce console buffer for mini configurations
- Add fix for AMS
- Add support for XDP platform
Zynq:
- Support for AES engine
- Enable bigger memory test by default
- Extend documentation for SD preparation
- Use different freq for Topic miami board
mmc:
- minor GD pointer removal
net:
- Support fixed-link cases by zynq gem
- Fix phy looking loop in axi enet driver
spi:
- Cleanup global macros for xilinx spi drivers
firmware:
- Add support for pmufw reloading
fpga:
- Improve error status reporting
common:
- Remove 4kB addition space for FDT allocation
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/xilinx_spi.c | 6 | ||||
-rw-r--r-- | drivers/spi/zynq_qspi.c | 6 | ||||
-rw-r--r-- | drivers/spi/zynq_spi.c | 6 |
3 files changed, 6 insertions, 12 deletions
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 05768eef72..348630faf3 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -76,9 +76,7 @@ SPICR_SPE) #define XILSPI_SPICR_DFLT_OFF (SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS) -#ifndef CONFIG_XILINX_SPI_IDLE_VAL -#define CONFIG_XILINX_SPI_IDLE_VAL GENMASK(7, 0) -#endif +#define XILINX_SPI_IDLE_VAL GENMASK(7, 0) #define XILINX_SPISR_TIMEOUT 10000 /* in milliseconds */ @@ -176,7 +174,7 @@ static u32 xilinx_spi_fill_txfifo(struct udevice *bus, const u8 *txp, while (txbytes && !(readl(®s->spisr) & SPISR_TX_FULL) && i < priv->fifo_depth) { - d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL; + d = txp ? *txp++ : XILINX_SPI_IDLE_VAL; debug("spi_xfer: tx:%x ", d); /* write out and wait for processing (receive data) */ writel(d & SPIDTR_8BIT_MASK, ®s->spidtr); diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c index db473da6ea..3f39ef05f2 100644 --- a/drivers/spi/zynq_qspi.c +++ b/drivers/spi/zynq_qspi.c @@ -47,9 +47,7 @@ DECLARE_GLOBAL_DATA_PTR; #define ZYNQ_QSPI_CR_SS_SHIFT 10 /* Slave select shift */ #define ZYNQ_QSPI_FIFO_DEPTH 63 -#ifndef CONFIG_SYS_ZYNQ_QSPI_WAIT -#define CONFIG_SYS_ZYNQ_QSPI_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ -#endif +#define ZYNQ_QSPI_WAIT (CONFIG_SYS_HZ / 100) /* 10 ms */ /* zynq qspi register set */ struct zynq_qspi_regs { @@ -350,7 +348,7 @@ static int zynq_qspi_irq_poll(struct zynq_qspi_priv *priv) do { status = readl(®s->isr); } while ((status == 0) && - (get_timer(timeout) < CONFIG_SYS_ZYNQ_QSPI_WAIT)); + (get_timer(timeout) < ZYNQ_QSPI_WAIT)); if (status == 0) { printf("zynq_qspi_irq_poll: Timeout!\n"); diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c index 3e66b34ebb..78ffd3e2fe 100644 --- a/drivers/spi/zynq_spi.c +++ b/drivers/spi/zynq_spi.c @@ -36,9 +36,7 @@ DECLARE_GLOBAL_DATA_PTR; #define ZYNQ_SPI_CR_SS_SHIFT 10 /* Slave select shift */ #define ZYNQ_SPI_FIFO_DEPTH 128 -#ifndef CONFIG_SYS_ZYNQ_SPI_WAIT -#define CONFIG_SYS_ZYNQ_SPI_WAIT (CONFIG_SYS_HZ/100) /* 10 ms */ -#endif +#define ZYNQ_SPI_WAIT (CONFIG_SYS_HZ / 100) /* 10 ms */ /* zynq spi register set */ struct zynq_spi_regs { @@ -251,7 +249,7 @@ static int zynq_spi_xfer(struct udevice *dev, unsigned int bitlen, ts = get_timer(0); status = readl(®s->isr); while (!(status & ZYNQ_SPI_IXR_TXOW_MASK)) { - if (get_timer(ts) > CONFIG_SYS_ZYNQ_SPI_WAIT) { + if (get_timer(ts) > ZYNQ_SPI_WAIT) { printf("spi_xfer: Timeout! TX FIFO not full\n"); return -1; } |