usb: eth: asix: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 255 deletions

diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c
index 674f78e214..26dd312b7d 100644
--- a/drivers/usb/eth/asix.c
+++ b/drivers/usb/eth/asix.c
@@ -101,16 +101,9 @@
 /* driver private */
 struct asix_private {
 	int flags;
-#ifdef CONFIG_DM_ETH
 	struct ueth_data ueth;
-#endif
 };
 
-#ifndef CONFIG_DM_ETH
-/* local vars */
-static int curr_eth_dev; /* index for name of next device detected */
-#endif
-
 /*
  * Asix infrastructure commands
  */
@@ -494,253 +487,6 @@ static int asix_send_common(struct ueth_data *dev, void *packet, int length)
 	return err;
 }
 
-#ifndef CONFIG_DM_ETH
-/*
- * Asix callbacks
- */
-static int asix_init(struct eth_device *eth, struct bd_info *bd)
-{
-	struct ueth_data *dev = (struct ueth_data *)eth->priv;
-
-	return asix_init_common(dev, eth->enetaddr);
-}
-
-static int asix_send(struct eth_device *eth, void *packet, int length)
-{
-	struct ueth_data *dev = (struct ueth_data *)eth->priv;
-
-	return asix_send_common(dev, packet, length);
-}
-
-static int asix_recv(struct eth_device *eth)
-{
-	struct ueth_data *dev = (struct ueth_data *)eth->priv;
-	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE);
-	unsigned char *buf_ptr;
-	int err;
-	int actual_len;
-	u32 packet_len;
-
-	debug("** %s()\n", __func__);
-
-	err = usb_bulk_msg(dev->pusb_dev,
-				usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
-				(void *)recv_buf,
-				AX_RX_URB_SIZE,
-				&actual_len,
-				USB_BULK_RECV_TIMEOUT);
-	debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE,
-		actual_len, err);
-	if (err != 0) {
-		debug("Rx: failed to receive\n");
-		return -1;
-	}
-	if (actual_len > AX_RX_URB_SIZE) {
-		debug("Rx: received too many bytes %d\n", actual_len);
-		return -1;
-	}
-
-	buf_ptr = recv_buf;
-	while (actual_len > 0) {
-		/*
-		 * 1st 4 bytes contain the length of the actual data as two
-		 * complementary 16-bit words. Extract the length of the data.
-		 */
-		if (actual_len < sizeof(packet_len)) {
-			debug("Rx: incomplete packet length\n");
-			return -1;
-		}
-		memcpy(&packet_len, buf_ptr, sizeof(packet_len));
-		le32_to_cpus(&packet_len);
-		if (((~packet_len >> 16) & 0x7ff) != (packet_len & 0x7ff)) {
-			debug("Rx: malformed packet length: %#x (%#x:%#x)\n",
-			      packet_len, (~packet_len >> 16) & 0x7ff,
-			      packet_len & 0x7ff);
-			return -1;
-		}
-		packet_len = packet_len & 0x7ff;
-		if (packet_len > actual_len - sizeof(packet_len)) {
-			debug("Rx: too large packet: %d\n", packet_len);
-			return -1;
-		}
-
-		/* Notify net stack */
-		net_process_received_packet(buf_ptr + sizeof(packet_len),
-					    packet_len);
-
-		/* Adjust for next iteration. Packets are padded to 16-bits */
-		if (packet_len & 1)
-			packet_len++;
-		actual_len -= sizeof(packet_len) + packet_len;
-		buf_ptr += sizeof(packet_len) + packet_len;
-	}
-
-	return err;
-}
-
-static void asix_halt(struct eth_device *eth)
-{
-	debug("** %s()\n", __func__);
-}
-
-static int asix_write_hwaddr(struct eth_device *eth)
-{
-	struct ueth_data *dev = (struct ueth_data *)eth->priv;
-
-	return asix_write_hwaddr_common(dev, eth->enetaddr);
-}
-
-/*
- * Asix probing functions
- */
-void asix_eth_before_probe(void)
-{
-	curr_eth_dev = 0;
-}
-
-struct asix_dongle {
-	unsigned short vendor;
-	unsigned short product;
-	int flags;
-};
-
-static const struct asix_dongle asix_dongles[] = {
-	{ 0x05ac, 0x1402, FLAG_TYPE_AX88772 },	/* Apple USB Ethernet Adapter */
-	{ 0x07d1, 0x3c05, FLAG_TYPE_AX88772 },	/* D-Link DUB-E100 H/W Ver B1 */
-	{ 0x2001, 0x1a02, FLAG_TYPE_AX88772 },	/* D-Link DUB-E100 H/W Ver C1 */
-	/* Cables-to-Go USB Ethernet Adapter */
-	{ 0x0b95, 0x772a, FLAG_TYPE_AX88772 },
-	{ 0x0b95, 0x7720, FLAG_TYPE_AX88772 },	/* Trendnet TU2-ET100 V3.0R */
-	{ 0x0b95, 0x1720, FLAG_TYPE_AX88172 },	/* SMC */
-	{ 0x0db0, 0xa877, FLAG_TYPE_AX88772 },	/* MSI - ASIX 88772a */
-	{ 0x13b1, 0x0018, FLAG_TYPE_AX88172 },	/* Linksys 200M v2.1 */
-	{ 0x1557, 0x7720, FLAG_TYPE_AX88772 },	/* 0Q0 cable ethernet */
-	/* DLink DUB-E100 H/W Ver B1 Alternate */
-	{ 0x2001, 0x3c05, FLAG_TYPE_AX88772 },
-	/* ASIX 88772B */
-	{ 0x0b95, 0x772b, FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC },
-	{ 0x0b95, 0x7e2b, FLAG_TYPE_AX88772B },
-	{ 0x0000, 0x0000, FLAG_NONE }	/* END - Do not remove */
-};
-
-/* Probe to see if a new device is actually an asix device */
-int asix_eth_probe(struct usb_device *dev, unsigned int ifnum,
-		      struct ueth_data *ss)
-{
-	struct usb_interface *iface;
-	struct usb_interface_descriptor *iface_desc;
-	int ep_in_found = 0, ep_out_found = 0;
-	int i;
-
-	/* let's examine the device now */
-	iface = &dev->config.if_desc[ifnum];
-	iface_desc = &dev->config.if_desc[ifnum].desc;
-
-	for (i = 0; asix_dongles[i].vendor != 0; i++) {
-		if (dev->descriptor.idVendor == asix_dongles[i].vendor &&
-		    dev->descriptor.idProduct == asix_dongles[i].product)
-			/* Found a supported dongle */
-			break;
-	}
-
-	if (asix_dongles[i].vendor == 0)
-		return 0;
-
-	memset(ss, 0, sizeof(struct ueth_data));
-
-	/* At this point, we know we've got a live one */
-	debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n",
-	      dev->descriptor.idVendor, dev->descriptor.idProduct);
-
-	/* Initialize the ueth_data structure with some useful info */
-	ss->ifnum = ifnum;
-	ss->pusb_dev = dev;
-	ss->subclass = iface_desc->bInterfaceSubClass;
-	ss->protocol = iface_desc->bInterfaceProtocol;
-
-	/* alloc driver private */
-	ss->dev_priv = calloc(1, sizeof(struct asix_private));
-	if (!ss->dev_priv)
-		return 0;
-
-	((struct asix_private *)ss->dev_priv)->flags = asix_dongles[i].flags;
-
-	/*
-	 * We are expecting a minimum of 3 endpoints - in, out (bulk), and
-	 * int. We will ignore any others.
-	 */
-	for (i = 0; i < iface_desc->bNumEndpoints; i++) {
-		/* is it an BULK endpoint? */
-		if ((iface->ep_desc[i].bmAttributes &
-		     USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
-			u8 ep_addr = iface->ep_desc[i].bEndpointAddress;
-			if (ep_addr & USB_DIR_IN) {
-				if (!ep_in_found) {
-					ss->ep_in = ep_addr &
-						USB_ENDPOINT_NUMBER_MASK;
-					ep_in_found = 1;
-				}
-			} else {
-				if (!ep_out_found) {
-					ss->ep_out = ep_addr &
-						USB_ENDPOINT_NUMBER_MASK;
-					ep_out_found = 1;
-				}
-			}
-		}
-
-		/* is it an interrupt endpoint? */
-		if ((iface->ep_desc[i].bmAttributes &
-		    USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
-			ss->ep_int = iface->ep_desc[i].bEndpointAddress &
-				USB_ENDPOINT_NUMBER_MASK;
-			ss->irqinterval = iface->ep_desc[i].bInterval;
-		}
-	}
-	debug("Endpoints In %d Out %d Int %d\n",
-		  ss->ep_in, ss->ep_out, ss->ep_int);
-
-	/* Do some basic sanity checks, and bail if we find a problem */
-	if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
-	    !ss->ep_in || !ss->ep_out || !ss->ep_int) {
-		debug("Problems with device\n");
-		return 0;
-	}
-	dev->privptr = (void *)ss;
-	return 1;
-}
-
-int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
-				struct eth_device *eth)
-{
-	struct asix_private *priv = (struct asix_private *)ss->dev_priv;
-
-	if (!eth) {
-		debug("%s: missing parameter.\n", __func__);
-		return 0;
-	}
-	sprintf(eth->name, "%s%d", ASIX_BASE_NAME, curr_eth_dev++);
-	eth->init = asix_init;
-	eth->send = asix_send;
-	eth->recv = asix_recv;
-	eth->halt = asix_halt;
-	if (!(priv->flags & FLAG_TYPE_AX88172))
-		eth->write_hwaddr = asix_write_hwaddr;
-	eth->priv = ss;
-
-	if (asix_basic_reset(ss))
-		return 0;
-
-	/* Get the MAC address */
-	if (asix_read_mac_common(ss, priv, eth->enetaddr))
-		return 0;
-	debug("MAC %pM\n", eth->enetaddr);
-
-	return 1;
-}
-#endif
-
-#ifdef CONFIG_DM_ETH
 static int asix_eth_start(struct udevice *dev)
 {
 	struct eth_pdata *pdata = dev_get_plat(dev);
@@ -909,4 +655,3 @@ static const struct usb_device_id asix_eth_id_table[] = {
 };
 
 U_BOOT_USB_DEVICE(asix_eth, asix_eth_id_table);
-#endif