diff options
| author | Frank Li <Frank.Li@nxp.com> | 2020-04-29 05:35:11 +0300 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2020-05-03 16:31:34 +0300 |
| commit | 8f95c0105f77dfc4f42babcdb725a55902a371f8 (patch) | |
| tree | 3e48ff65b4ac15e5e933b3734e6990a4d84d89e0 /drivers/usb/gadget | |
| parent | 62597d25514e3e36e891c626620624755d8cb56d (diff) | |
| download | u-boot-8f95c0105f77dfc4f42babcdb725a55902a371f8.tar.xz | |
usb: gadget: sdp: use CONFIG_SDP_LOADADDR as default load address
If SDP_WRITE and SDP_JUMP addr is zero, use CONFIG_SDP_LOADADDR
as default address
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'drivers/usb/gadget')
| -rw-r--r-- | drivers/usb/gadget/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/usb/gadget/f_sdp.c | 4 |
2 files changed, 6 insertions, 2 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 58ca82d4de..46aa3fe954 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -122,6 +122,10 @@ config USB_GADGET_VBUS_DRAW This value will be used except for system-specific gadget drivers that have more specific information. +config SDP_LOADADDR + hex "Default load address at SDP_WRITE and SDP_JUMP" + default 0 + # Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED bool diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c index 50836db4a0..1732a3acf1 100644 --- a/drivers/usb/gadget/f_sdp.c +++ b/drivers/usb/gadget/f_sdp.c @@ -276,7 +276,7 @@ static void sdp_rx_command_complete(struct usb_ep *ep, struct usb_request *req) sdp->error_status = SDP_WRITE_FILE_COMPLETE; sdp->state = SDP_STATE_RX_FILE_DATA; - sdp->dnl_address = be32_to_cpu(cmd->addr); + sdp->dnl_address = cmd->addr ? be32_to_cpu(cmd->addr) : CONFIG_SDP_LOADADDR; sdp->dnl_bytes_remaining = be32_to_cpu(cmd->cnt); sdp->dnl_bytes = sdp->dnl_bytes_remaining; sdp->next_state = SDP_STATE_IDLE; @@ -304,7 +304,7 @@ static void sdp_rx_command_complete(struct usb_ep *ep, struct usb_request *req) sdp->always_send_status = false; sdp->error_status = 0; - sdp->jmp_address = be32_to_cpu(cmd->addr); + sdp->jmp_address = cmd->addr ? be32_to_cpu(cmd->addr) : CONFIG_SDP_LOADADDR; sdp->state = SDP_STATE_TX_SEC_CONF; sdp->next_state = SDP_STATE_JUMP; break; |