diff options
| author | Tom Rini <trini@konsulko.com> | 2021-09-14 16:09:31 +0300 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2021-10-01 19:08:19 +0300 |
| commit | 14b38cb0c272db4ef5cd9d1af0aabd2636cdc9c0 (patch) | |
| tree | 45e638fd4dbabfbdde88eea296f3df370d56b10d /drivers/usb/host | |
| parent | 570320da3b4248f882349400dc5b4f8dbc403cef (diff) | |
| download | u-boot-14b38cb0c272db4ef5cd9d1af0aabd2636cdc9c0.tar.xz | |
arm: Remove flea3 board
This board has not been converted to CONFIG_DM by the deadline.
Remove it. As this is the last mx35 platform, remove that support as
well.
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/ehci-mxc.c | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index d0b7ac512e..090548fb19 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -151,55 +151,6 @@ static int mxc_set_usbcontrol(int port, unsigned int flags) default: return -EINVAL; } -#elif defined(CONFIG_MX35) - switch (port) { - case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT | - MX35_OTG_OCPOL_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_OTG_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX35_OTG_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX35_OTG_OCPOL_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT | - MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | - MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | - MX35_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_H1_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX35_H1_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX35_H1_OCPOL_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX35_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX35_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX35_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX35_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } #else #error MXC EHCI USB driver not supported on this platform #endif @@ -230,10 +181,6 @@ int ehci_hcd_init(int index, enum usb_init_type init, setbits_le32(&ehci->usbmode, CM_HOST); __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS); -#ifdef CONFIG_MX35 - /* Workaround for ENGcm11601 */ - __raw_writel(0, &ehci->sbuscfg); -#endif udelay(10000); |