WS cleanup: remove SPACE(s) followed by TAB

Signed-off-by: Wolfgang Denk <wd@denx.de>

8 files changed, 18 insertions, 18 deletions

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 44533fd7fe..1502cb859a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -691,8 +691,8 @@ struct dwc3_scratchpad_array {
  * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
  *			there's now way for software to detect this in runtime.
  * @is_utmi_l1_suspend: the core asserts output signal
- * 	0	- utmi_sleep_n
- * 	1	- utmi_l1_suspend_n
+ *	0	- utmi_sleep_n
+ *	1	- utmi_l1_suspend_n
  * @is_selfpowered: true when we are selfpowered
  * @is_fpga: true when we are using the FPGA board
  * @needs_fifo_resize: not all users might want fifo resizing, flag it
@@ -713,10 +713,10 @@ struct dwc3_scratchpad_array {
  * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
- * 	0	- -6dB de-emphasis
- * 	1	- -3.5dB de-emphasis
- * 	2	- No de-emphasis
- * 	3	- Reserved
+ *	0	- -6dB de-emphasis
+ *	1	- -3.5dB de-emphasis
+ *	2	- No de-emphasis
+ *	3	- Reserved
  * @index: index of _this_ controller
  * @list: to maintain the list of dwc3 controllers
  */
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4e68fb0a82..eb416b832a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2209,7 +2209,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		 * BESL value in the LPM token is less than or equal to LPM
 		 * NYET threshold.
 		 */
-		if (dwc->revision < DWC3_REVISION_240A 	&& dwc->has_lpm_erratum)
+		if (dwc->revision < DWC3_REVISION_240A	&& dwc->has_lpm_erratum)
 			WARN(true, "LPM Erratum not available on dwc3 revisisions < 2.40a\n");
 
 		if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 96a521ee08..e18de0e2f0 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -35,7 +35,7 @@
 
 #define AT91_UDP_ISR		0x1c		/* Interrupt Status Register */
 #define     AT91_UDP_EP(n)	(1 << (n))	/* Endpoint Interrupt Status */
-#define     AT91_UDP_RXSUSP	(1 <<  8) 	/* USB Suspend Interrupt Status */
+#define     AT91_UDP_RXSUSP	(1 <<  8)	/* USB Suspend Interrupt Status */
 #define     AT91_UDP_RXRSM	(1 <<  9)	/* USB Resume Interrupt Status */
 #define     AT91_UDP_EXTRSM	(1 << 10)	/* External Resume Interrupt Status [AT91RM9200 only] */
 #define     AT91_UDP_SOFINT	(1 << 11)	/* Start of Frame Interrupt Status */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index ba362b8f25..583ceb4d55 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -472,7 +472,7 @@ void udc_irq(void)
  * so using '|=' isn't safe as it may ack an interrupt.
  */
 #define UDCCR_OEN		(1 << 31)   /* On-the-Go Enable */
-#define UDCCR_MASK_BITS     	(UDCCR_OEN | UDCCR_UDE)
+#define UDCCR_MASK_BITS		(UDCCR_OEN | UDCCR_UDE)
 
 static inline void udc_set_mask_UDCCR(int mask)
 {
diff --git a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
index f0f48a3354..8db88f0dcf 100644
--- a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
+++ b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
@@ -40,7 +40,7 @@
  *
  * To generate the content of the array below, use ie. the following command:
  * $ hexdump -v -e '/4 "0x%08x, "' r8a779x_usb3_v3.dlmem | \
- * 	sed "s@\(.\{47\}\) @\1\n@g"
+ *	sed "s@\(.\{47\}\) @\1\n@g"
  *
  * [1] git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
  */
diff --git a/drivers/usb/musb-new/musb_gadget.c b/drivers/usb/musb-new/musb_gadget.c
index 5b149dac6d..1fef00b292 100644
--- a/drivers/usb/musb-new/musb_gadget.c
+++ b/drivers/usb/musb-new/musb_gadget.c
@@ -995,8 +995,8 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 				&& (musb_ep->dma->actual_len
 					== musb_ep->packet_sz)) {
 			/* In double buffer case, continue to unload fifo if
- 			 * there is Rx packet in FIFO.
- 			 **/
+			 * there is Rx packet in FIFO.
+			 **/
 			csr = musb_readw(epio, MUSB_RXCSR);
 			if ((csr & MUSB_RXCSR_RXPKTRDY) &&
 				hw_ep->rx_double_buffered)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index e5d8ac7028..47b839c083 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -207,14 +207,14 @@ struct musb_regs {
 /* TxType/RxType */
 #define MUSB_TYPE_SPEED		0xc0
 #define MUSB_TYPE_SPEED_SHIFT	6
-#define MUSB_TYPE_SPEED_HIGH 	1
-#define MUSB_TYPE_SPEED_FULL 	2
+#define MUSB_TYPE_SPEED_HIGH	1
+#define MUSB_TYPE_SPEED_FULL	2
 #define MUSB_TYPE_SPEED_LOW	3
 #define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
 #define MUSB_TYPE_PROTO_SHIFT	4
 #define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
-#define MUSB_TYPE_PROTO_BULK 	2
-#define MUSB_TYPE_PROTO_INTR 	3
+#define MUSB_TYPE_PROTO_BULK	2
+#define MUSB_TYPE_PROTO_INTR	3
 
 /* CONFIGDATA */
 #define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
@@ -304,7 +304,7 @@ struct musb_regs {
  * values are not supported
  */
 struct musb_epinfo {
-	u8	epnum;	/* endpoint number 	*/
+	u8	epnum;	/* endpoint number	*/
 	u8	epdir;	/* endpoint direction	*/
 	u16	epsize;	/* endpoint FIFO size	*/
 };
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index ffed3b82be..17901704f5 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -14,7 +14,7 @@
 #include "musb_hcd.h"
 
 /* MSC control transfers */
-#define USB_MSC_BBB_RESET 	0xFF
+#define USB_MSC_BBB_RESET	0xFF
 #define USB_MSC_BBB_GET_MAX_LUN	0xFE
 
 /* Endpoint configuration information */