diff options
author | Siarhei Siamashka <siarhei.siamashka@gmail.com> | 2015-01-19 06:23:32 +0300 |
---|---|---|
committer | Hans de Goede <hdegoede@redhat.com> | 2015-01-22 14:34:56 +0300 |
commit | b8329acf98c42f7578f6897ebc5d509a4317bb0b (patch) | |
tree | 6dfd1808f1a9348bf93491bd4aa7c5881fd6383e /drivers/video/ssd2828.h | |
parent | ebe079bc51e0ad1d49424cc3da8bf199511a81ac (diff) | |
download | u-boot-b8329acf98c42f7578f6897ebc5d509a4317bb0b.tar.xz |
video: Add support for SSD2828 (parallel LCD to MIPI bridge)
SSD2828 can take pixel data coming from a parallel LCD interface
and translate it on the fly into MIPI DSI interface for driving
a MIPI compatible TFT display. SSD2828 is configured over SPI
interface, which may or may not have MISO pin wired up on some
hardware. So a write-only SPI mode also has to be supported.
The SSD2828 support code is implemented as a utility function
and needs to be called from real display drivers, which are
responsible for driving parallel LCD hardware in front of the
video pipeline. The usage instructions are provided as comments
in the header file.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'drivers/video/ssd2828.h')
-rw-r--r-- | drivers/video/ssd2828.h | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/drivers/video/ssd2828.h b/drivers/video/ssd2828.h new file mode 100644 index 0000000000..14b96c5143 --- /dev/null +++ b/drivers/video/ssd2828.h @@ -0,0 +1,123 @@ +/* + * (C) 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * Support for the SSD2828 bridge chip, which can take pixel data coming + * from a parallel LCD interface and translate it on the flight into MIPI DSI + * interface for driving a MIPI compatible TFT display. + * + * Implemented as a utility function. To be used from display drivers, which are + * responsible for driving parallel LCD hardware in front of the video pipeline. + */ + +#ifndef _SSD2828_H +#define _SSD2828_H + +struct ctfb_res_modes; + +struct ssd2828_config { + /*********************************************************************/ + /* SSD2828 configuration */ + /*********************************************************************/ + + /* + * The pins, which are used for SPI communication. This is only used + * for configuring SSD2828, so the performance is irrelevant (only + * around a hundred of bytes is moved). Also these can be any arbitrary + * GPIO pins (not necessarily the pins having hardware SPI function). + * Moreover, the 'sdo' pin may be even not wired up in some devices. + * + * These configuration variables need to be set as pin numbers for + * the standard u-boot GPIO interface (gpio_get_value/gpio_set_value + * functions). Note that -1 value can be used for the pins, which are + * not really wired up. + */ + int csx_pin; + int sck_pin; + int sdi_pin; + int sdo_pin; + /* SSD2828 reset pin (shared with LCD panel reset) */ + int reset_pin; + + /* + * The SSD2828 has its own dedicated clock source 'tx_clk' (connected + * to TX_CLK_XIO/TX_CLK_XIN pins), which is necessary at least for + * clocking SPI after reset. The exact clock speed is not strictly, + * defined, but the datasheet says that it must be somewhere in the + * 8MHz - 30MHz range (see "TX_CLK Timing" section). It is used as + * a reference clock for PLL and must be set correctly. + */ + int ssd2828_tx_clk_khz; + + /* + * This is not a property of the used LCD panel, but more like a + * property of the SSD2828 wiring. See the "SSD2828QN4 RGB data + * arrangement" table in the datasheet. The SSD2828 pins are arranged + * in such a way that 18bpp and 24bpp configurations are completely + * incompatible with each other. + * + * Depending on the color depth, this must be set to 16, 18 or 24. + */ + int ssd2828_color_depth; + + /*********************************************************************/ + /* LCD panel configuration */ + /*********************************************************************/ + + /* + * The number of lanes in the MIPI DSI interface. May vary from 1 to 4. + * + * This information can be found in the LCD panel datasheet. + */ + int mipi_dsi_number_of_data_lanes; + + /* + * Data transfer bit rate per lane. Please note that it is expected + * to be higher than the pixel clock rate of the used video mode when + * multiplied by the number of lanes. This is perfectly normal because + * MIPI DSI handles data transfers in periodic bursts, and uses the + * idle time between bursts for sending configuration information and + * commands. Or just for saving power. + * + * The necessary Mbps/lane information can be found in the LCD panel + * datasheet. Note that the transfer rate can't be always set precisely + * and it may be rounded *up* (introducing no more than 10Mbps error). + */ + int mipi_dsi_bitrate_per_data_lane_mbps; + + /* + * Setting this to 1 enforces packing of 18bpp pixel data in 24bpp + * envelope when sending it over the MIPI DSI link. + * + * If unsure, set to 0. + */ + int mipi_dsi_loosely_packed_pixel_format; + + /* + * According to the "Example for system sleep in and out" section in + * the SSD2828 datasheet, some LCD panel specific delays are necessary + * after MIPI DCS commands EXIT_SLEEP_MODE and SET_DISPLAY_ON. + * + * For example, Allwinner uses 100 milliseconds delay after + * EXIT_SLEEP_MODE and 200 milliseconds delay after SET_DISPLAY_ON. + */ + int mipi_dsi_delay_after_exit_sleep_mode_ms; + int mipi_dsi_delay_after_set_display_on_ms; +}; + +/* + * Initialize the SSD2828 chip. It needs the 'ssd2828_config' structure + * and also the video mode timings. + * + * The right place to insert this function call is after the parallel LCD + * interface is initialized and before turning on the backlight. This is + * advised in the "Example for system sleep in and out" section of the + * SSD2828 datasheet. + */ +int ssd2828_init(const struct ssd2828_config *cfg, + const struct ctfb_res_modes *mode); + +#endif |