diff options
author | Yannick Fertré <yannick.fertre@st.com> | 2019-10-07 16:29:07 +0300 |
---|---|---|
committer | Anatolij Gustschin <agust@denx.de> | 2019-10-14 00:38:12 +0300 |
commit | 18b6ca5c5aad088cfce74cef03edad6218a0149b (patch) | |
tree | ba33cfdee79bffb3d3748f399f2dc2b9ff4d746a /drivers/video/stm32 | |
parent | d4f7ea83fc3415584d9c28564164c1e056f37917 (diff) | |
download | u-boot-18b6ca5c5aad088cfce74cef03edad6218a0149b.tar.xz |
video: add support of STM32 MIPI DSI controller driver
Add the STM32 DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Diffstat (limited to 'drivers/video/stm32')
-rw-r--r-- | drivers/video/stm32/Kconfig | 9 | ||||
-rw-r--r-- | drivers/video/stm32/Makefile | 1 | ||||
-rw-r--r-- | drivers/video/stm32/stm32_dsi.c | 490 |
3 files changed, 500 insertions, 0 deletions
diff --git a/drivers/video/stm32/Kconfig b/drivers/video/stm32/Kconfig index 78b1facad4..95d51bb4e9 100644 --- a/drivers/video/stm32/Kconfig +++ b/drivers/video/stm32/Kconfig @@ -13,6 +13,15 @@ menuconfig VIDEO_STM32 DSI. This option enables these supports which can be used on devices which have RGB TFT or DSI display connected. +config VIDEO_STM32_DSI + bool "Enable STM32 DSI video support" + depends on VIDEO_STM32 + select VIDEO_BRIDGE + select VIDEO_DW_MIPI_DSI + help + This option enables support DSI internal bridge which can be used on + devices which have DSI devices connected. + config VIDEO_STM32_MAX_XRES int "Maximum horizontal resolution (for memory allocation purposes)" depends on VIDEO_STM32 diff --git a/drivers/video/stm32/Makefile b/drivers/video/stm32/Makefile index 7297e5f57a..f8b42d1a4d 100644 --- a/drivers/video/stm32/Makefile +++ b/drivers/video/stm32/Makefile @@ -6,3 +6,4 @@ # Yannick Fertre <yannick.fertre@st.com> obj-${CONFIG_VIDEO_STM32} = stm32_ltdc.o +obj-${CONFIG_VIDEO_STM32_DSI} += stm32_dsi.o diff --git a/drivers/video/stm32/stm32_dsi.c b/drivers/video/stm32/stm32_dsi.c new file mode 100644 index 0000000000..cb89576e1d --- /dev/null +++ b/drivers/video/stm32/stm32_dsi.c @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 STMicroelectronics - All Rights Reserved + * Author(s): Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics. + * Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics. + * + * This MIPI DSI controller driver is based on the Linux Kernel driver from + * drivers/gpu/drm/stm/dw_mipi_dsi-stm.c. + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dsi_host.h> +#include <mipi_dsi.h> +#include <panel.h> +#include <reset.h> +#include <video.h> +#include <video_bridge.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> +#include <dm/device-internal.h> +#include <linux/iopoll.h> +#include <power/regulator.h> + +#define HWVER_130 0x31333000 /* IP version 1.30 */ +#define HWVER_131 0x31333100 /* IP version 1.31 */ + +/* DSI digital registers & bit definitions */ +#define DSI_VERSION 0x00 +#define VERSION GENMASK(31, 8) + +/* + * DSI wrapper registers & bit definitions + * Note: registers are named as in the Reference Manual + */ +#define DSI_WCFGR 0x0400 /* Wrapper ConFiGuration Reg */ +#define WCFGR_DSIM BIT(0) /* DSI Mode */ +#define WCFGR_COLMUX GENMASK(3, 1) /* COLor MUltipleXing */ + +#define DSI_WCR 0x0404 /* Wrapper Control Reg */ +#define WCR_DSIEN BIT(3) /* DSI ENable */ + +#define DSI_WISR 0x040C /* Wrapper Interrupt and Status Reg */ +#define WISR_PLLLS BIT(8) /* PLL Lock Status */ +#define WISR_RRS BIT(12) /* Regulator Ready Status */ + +#define DSI_WPCR0 0x0418 /* Wrapper Phy Conf Reg 0 */ +#define WPCR0_UIX4 GENMASK(5, 0) /* Unit Interval X 4 */ +#define WPCR0_TDDL BIT(16) /* Turn Disable Data Lanes */ + +#define DSI_WRPCR 0x0430 /* Wrapper Regulator & Pll Ctrl Reg */ +#define WRPCR_PLLEN BIT(0) /* PLL ENable */ +#define WRPCR_NDIV GENMASK(8, 2) /* pll loop DIVision Factor */ +#define WRPCR_IDF GENMASK(14, 11) /* pll Input Division Factor */ +#define WRPCR_ODF GENMASK(17, 16) /* pll Output Division Factor */ +#define WRPCR_REGEN BIT(24) /* REGulator ENable */ +#define WRPCR_BGREN BIT(28) /* BandGap Reference ENable */ +#define IDF_MIN 1 +#define IDF_MAX 7 +#define NDIV_MIN 10 +#define NDIV_MAX 125 +#define ODF_MIN 1 +#define ODF_MAX 8 + +/* dsi color format coding according to the datasheet */ +enum dsi_color { + DSI_RGB565_CONF1, + DSI_RGB565_CONF2, + DSI_RGB565_CONF3, + DSI_RGB666_CONF1, + DSI_RGB666_CONF2, + DSI_RGB888, +}; + +#define LANE_MIN_KBPS 31250 +#define LANE_MAX_KBPS 500000 + +/* Timeout for regulator on/off, pll lock/unlock & fifo empty */ +#define TIMEOUT_US 200000 + +struct stm32_dsi_priv { + struct mipi_dsi_device device; + void __iomem *base; + struct udevice *panel; + u32 pllref_clk; + u32 hw_version; + int lane_min_kbps; + int lane_max_kbps; + struct udevice *vdd_reg; + struct udevice *dsi_host; +}; + +static inline void dsi_write(struct stm32_dsi_priv *dsi, u32 reg, u32 val) +{ + writel(val, dsi->base + reg); +} + +static inline u32 dsi_read(struct stm32_dsi_priv *dsi, u32 reg) +{ + return readl(dsi->base + reg); +} + +static inline void dsi_set(struct stm32_dsi_priv *dsi, u32 reg, u32 mask) +{ + dsi_write(dsi, reg, dsi_read(dsi, reg) | mask); +} + +static inline void dsi_clear(struct stm32_dsi_priv *dsi, u32 reg, u32 mask) +{ + dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask); +} + +static inline void dsi_update_bits(struct stm32_dsi_priv *dsi, u32 reg, + u32 mask, u32 val) +{ + dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val); +} + +static enum dsi_color dsi_color_from_mipi(u32 fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB888: + return DSI_RGB888; + case MIPI_DSI_FMT_RGB666: + return DSI_RGB666_CONF2; + case MIPI_DSI_FMT_RGB666_PACKED: + return DSI_RGB666_CONF1; + case MIPI_DSI_FMT_RGB565: + return DSI_RGB565_CONF1; + default: + pr_err("MIPI color invalid, so we use rgb888\n"); + } + return DSI_RGB888; +} + +static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf) +{ + int divisor = idf * odf; + + /* prevent from division by 0 */ + if (!divisor) + return 0; + + return DIV_ROUND_CLOSEST(clkin_khz * ndiv, divisor); +} + +static int dsi_pll_get_params(struct stm32_dsi_priv *dsi, + int clkin_khz, int clkout_khz, + int *idf, int *ndiv, int *odf) +{ + int i, o, n, n_min, n_max; + int fvco_min, fvco_max, delta, best_delta; /* all in khz */ + + /* Early checks preventing division by 0 & odd results */ + if (clkin_khz <= 0 || clkout_khz <= 0) + return -EINVAL; + + fvco_min = dsi->lane_min_kbps * 2 * ODF_MAX; + fvco_max = dsi->lane_max_kbps * 2 * ODF_MIN; + + best_delta = 1000000; /* big started value (1000000khz) */ + + for (i = IDF_MIN; i <= IDF_MAX; i++) { + /* Compute ndiv range according to Fvco */ + n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1; + n_max = (fvco_max * i) / (2 * clkin_khz); + + /* No need to continue idf loop if we reach ndiv max */ + if (n_min >= NDIV_MAX) + break; + + /* Clamp ndiv to valid values */ + if (n_min < NDIV_MIN) + n_min = NDIV_MIN; + if (n_max > NDIV_MAX) + n_max = NDIV_MAX; + + for (o = ODF_MIN; o <= ODF_MAX; o *= 2) { + n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz); + /* Check ndiv according to vco range */ + if (n < n_min || n > n_max) + continue; + /* Check if new delta is better & saves parameters */ + delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) - + clkout_khz; + if (delta < 0) + delta = -delta; + if (delta < best_delta) { + *idf = i; + *ndiv = n; + *odf = o; + best_delta = delta; + } + /* fast return in case of "perfect result" */ + if (!delta) + return 0; + } + } + + return 0; +} + +static int dsi_phy_init(void *priv_data) +{ + struct mipi_dsi_device *device = priv_data; + struct udevice *dev = device->dev; + struct stm32_dsi_priv *dsi = dev_get_priv(dev); + u32 val; + int ret; + + debug("Initialize DSI physical layer\n"); + + /* Enable the regulator */ + dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN); + ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS, + TIMEOUT_US); + if (ret) { + debug("!TIMEOUT! waiting REGU\n"); + return ret; + } + + /* Enable the DSI PLL & wait for its lock */ + dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN); + ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS, + TIMEOUT_US); + if (ret) { + debug("!TIMEOUT! waiting PLL\n"); + return ret; + } + + return 0; +} + +static void dsi_phy_post_set_mode(void *priv_data, unsigned long mode_flags) +{ + struct mipi_dsi_device *device = priv_data; + struct udevice *dev = device->dev; + struct stm32_dsi_priv *dsi = dev_get_priv(dev); + + debug("Set mode %p enable %ld\n", dsi, + mode_flags & MIPI_DSI_MODE_VIDEO); + + if (!dsi) + return; + + /* + * DSI wrapper must be enabled in video mode & disabled in command mode. + * If wrapper is enabled in command mode, the display controller + * register access will hang. + */ + + if (mode_flags & MIPI_DSI_MODE_VIDEO) + dsi_set(dsi, DSI_WCR, WCR_DSIEN); + else + dsi_clear(dsi, DSI_WCR, WCR_DSIEN); +} + +static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings, + u32 lanes, u32 format, unsigned int *lane_mbps) +{ + struct mipi_dsi_device *device = priv_data; + struct udevice *dev = device->dev; + struct stm32_dsi_priv *dsi = dev_get_priv(dev); + int idf, ndiv, odf, pll_in_khz, pll_out_khz; + int ret, bpp; + u32 val; + + /* Update lane capabilities according to hw version */ + dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION; + dsi->lane_min_kbps = LANE_MIN_KBPS; + dsi->lane_max_kbps = LANE_MAX_KBPS; + if (dsi->hw_version == HWVER_131) { + dsi->lane_min_kbps *= 2; + dsi->lane_max_kbps *= 2; + } + + pll_in_khz = dsi->pllref_clk / 1000; + + /* Compute requested pll out */ + bpp = mipi_dsi_pixel_format_to_bpp(format); + pll_out_khz = (timings->pixelclock.typ / 1000) * bpp / lanes; + /* Add 20% to pll out to be higher than pixel bw (burst mode only) */ + pll_out_khz = (pll_out_khz * 12) / 10; + if (pll_out_khz > dsi->lane_max_kbps) { + pll_out_khz = dsi->lane_max_kbps; + dev_warn(dev, "Warning max phy mbps is used\n"); + } + if (pll_out_khz < dsi->lane_min_kbps) { + pll_out_khz = dsi->lane_min_kbps; + dev_warn(dev, "Warning min phy mbps is used\n"); + } + + /* Compute best pll parameters */ + idf = 0; + ndiv = 0; + odf = 0; + ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz, + &idf, &ndiv, &odf); + if (ret) { + dev_err(dev, "Warning dsi_pll_get_params(): bad params\n"); + return ret; + } + + /* Get the adjusted pll out value */ + pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf); + + /* Set the PLL division factors */ + dsi_update_bits(dsi, DSI_WRPCR, WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF, + (ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16)); + + /* Compute uix4 & set the bit period in high-speed mode */ + val = 4000000 / pll_out_khz; + dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val); + + /* Select video mode by resetting DSIM bit */ + dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM); + + /* Select the color coding */ + dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX, + dsi_color_from_mipi(format) << 1); + + *lane_mbps = pll_out_khz / 1000; + + debug("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", + pll_in_khz, pll_out_khz, *lane_mbps); + + return 0; +} + +static const struct mipi_dsi_phy_ops dsi_stm_phy_ops = { + .init = dsi_phy_init, + .get_lane_mbps = dsi_get_lane_mbps, + .post_set_mode = dsi_phy_post_set_mode, +}; + +static int stm32_dsi_attach(struct udevice *dev) +{ + struct stm32_dsi_priv *priv = dev_get_priv(dev); + struct mipi_dsi_device *device = &priv->device; + struct mipi_dsi_panel_plat *mplat; + struct display_timing timings; + int ret; + + ret = uclass_first_device(UCLASS_PANEL, &priv->panel); + if (ret) { + dev_err(dev, "panel device error %d\n", ret); + return ret; + } + + mplat = dev_get_platdata(priv->panel); + mplat->device = &priv->device; + + ret = panel_get_display_timing(priv->panel, &timings); + if (ret) { + ret = fdtdec_decode_display_timing(gd->fdt_blob, + dev_of_offset(priv->panel), + 0, &timings); + if (ret) { + dev_err(dev, "decode display timing error %d\n", ret); + return ret; + } + } + + ret = uclass_get_device(UCLASS_DSI_HOST, 0, &priv->dsi_host); + if (ret) { + dev_err(dev, "No video dsi host detected %d\n", ret); + return ret; + } + + ret = dsi_host_init(priv->dsi_host, device, &timings, 2, + &dsi_stm_phy_ops); + if (ret) { + dev_err(dev, "failed to initialize mipi dsi host\n"); + return ret; + } + + return 0; +} + +static int stm32_dsi_set_backlight(struct udevice *dev, int percent) +{ + struct stm32_dsi_priv *priv = dev_get_priv(dev); + int ret; + + ret = panel_enable_backlight(priv->panel); + if (ret) { + dev_err(dev, "panel %s enable backlight error %d\n", + priv->panel->name, ret); + return ret; + } + + ret = dsi_host_enable(priv->dsi_host); + if (ret) { + dev_err(dev, "failed to enable mipi dsi host\n"); + return ret; + } + + return 0; +} + +static int stm32_dsi_probe(struct udevice *dev) +{ + struct stm32_dsi_priv *priv = dev_get_priv(dev); + struct mipi_dsi_device *device = &priv->device; + struct reset_ctl rst; + struct clk clk; + int ret; + + device->dev = dev; + + priv->base = (void *)dev_read_addr(dev); + if ((fdt_addr_t)priv->base == FDT_ADDR_T_NONE) { + dev_err(dev, "dsi dt register address error\n"); + return -EINVAL; + } + + if (IS_ENABLED(CONFIG_DM_REGULATOR)) { + ret = device_get_supply_regulator(dev, "phy-dsi-supply", + &priv->vdd_reg); + if (ret && ret != -ENOENT) { + dev_err(dev, "Warning: cannot get phy dsi supply\n"); + return -ENODEV; + } + + if (ret != -ENOENT) { + ret = regulator_set_enable(priv->vdd_reg, true); + if (ret) + return ret; + } + } + + ret = clk_get_by_name(device->dev, "pclk", &clk); + if (ret) { + dev_err(dev, "peripheral clock get error %d\n", ret); + goto err_reg; + } + + ret = clk_enable(&clk); + if (ret) { + dev_err(dev, "peripheral clock enable error %d\n", ret); + goto err_reg; + } + + ret = clk_get_by_name(dev, "ref", &clk); + if (ret) { + dev_err(dev, "pll reference clock get error %d\n", ret); + goto err_clk; + } + + priv->pllref_clk = (unsigned int)clk_get_rate(&clk); + + ret = reset_get_by_index(device->dev, 0, &rst); + if (ret) { + dev_err(dev, "missing dsi hardware reset\n"); + goto err_clk; + } + + /* Reset */ + reset_deassert(&rst); + + return 0; +err_clk: + clk_disable(&clk); +err_reg: + if (IS_ENABLED(CONFIG_DM_REGULATOR)) + regulator_set_enable(priv->vdd_reg, false); + + return ret; +} + +struct video_bridge_ops stm32_dsi_ops = { + .attach = stm32_dsi_attach, + .set_backlight = stm32_dsi_set_backlight, +}; + +static const struct udevice_id stm32_dsi_ids[] = { + { .compatible = "st,stm32-dsi"}, + { } +}; + +U_BOOT_DRIVER(stm32_dsi) = { + .name = "stm32-display-dsi", + .id = UCLASS_VIDEO_BRIDGE, + .of_match = stm32_dsi_ids, + .bind = dm_scan_fdt_dev, + .probe = stm32_dsi_probe, + .ops = &stm32_dsi_ops, + .priv_auto_alloc_size = sizeof(struct stm32_dsi_priv), +}; |