diff options
author | Masami Hiramatsu <masami.hiramatsu@linaro.org> | 2021-06-04 12:44:06 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2021-07-06 21:07:36 +0300 |
commit | 3296d52bb5d32000da308658c396e8e4975e18a6 (patch) | |
tree | b37cd9dca45cd145fc89e9aae035474af5282132 /drivers | |
parent | 7a672057dcd36792f01529922fc85892a03be22d (diff) | |
download | u-boot-3296d52bb5d32000da308658c396e8e4975e18a6.tar.xz |
pci: synquacer: Add SynQuacer ECAM based PCIe driver
Add ECAM based SynQuacer PCIe RC driver. This driver configures the
PCIe RC and filter out a ghost pcie config.
Since the Linux kernel expects "socionext,synquacer-pcie-ecam" device
is configured by firmware (EDK2), it doesn't re-configure in the kernel.
So as same as EDK2, U-Boot needs to configure it before boot the kernel.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/pci/Kconfig | 12 | ||||
-rw-r--r-- | drivers/pci/Makefile | 1 | ||||
-rw-r--r-- | drivers/pci/pcie_ecam_synquacer.c | 600 |
3 files changed, 613 insertions, 0 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index b2b7b253f8..782179eb0f 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -81,6 +81,18 @@ config PCIE_ECAM_GENERIC Say Y here if you want to enable support for generic ECAM-based PCIe host controllers, such as the one emulated by QEMU. +config PCIE_ECAM_SYNQUACER + bool "SynQuacer ECAM-based PCI host controller support" + default n + depends on DM_PCI + select PCI_INIT_R + select PCI_REGION_MULTI_ENTRY + help + Say Y here if you want to enable support for Socionext + SynQuacer SoC's ECAM-based PCIe host controllers. + Note that this must be configured when boot because Linux driver + expects the PCIe RC has been configured in the bootloader. + config PCI_PHYTIUM bool "Phytium PCIe support" depends on DM_PCI diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index c742bb2c94..6568dc9a08 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -16,6 +16,7 @@ endif obj-$(CONFIG_PCI) += pci_auto_common.o pci_common.o obj-$(CONFIG_PCIE_ECAM_GENERIC) += pcie_ecam_generic.o +obj-$(CONFIG_PCIE_ECAM_SYNQUACER) += pcie_ecam_synquacer.o obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o diff --git a/drivers/pci/pcie_ecam_synquacer.c b/drivers/pci/pcie_ecam_synquacer.c new file mode 100644 index 0000000000..c6e7c59f8a --- /dev/null +++ b/drivers/pci/pcie_ecam_synquacer.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SynQuacer PCIE host driver + * + * Based on drivers/pci/pcie_ecam_generic.c + * + * Copyright (C) 2016 Imagination Technologies + * Copyright (C) 2021 Linaro Ltd. + */ + +#include <common.h> +#include <dm.h> +#include <pci.h> +#include <log.h> + +#include <asm/io.h> +#include <linux/bitops.h> +#include <linux/delay.h> + +/* iATU registers */ +#define IATU_VIEWPORT_OFF 0x900 +#define IATU_VIEWPORT_INBOUND BIT(31) +#define IATU_VIEWPORT_OUTBOUND 0 +#define IATU_VIEWPORT_REGION_INDEX(idx) ((idx) & 7) + +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0 0x904 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_MEM 0x0 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_IO 0x2 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG0 0x4 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG1 0x5 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TH BIT(12) + +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0 0x908 +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_REGION_EN BIT(31) +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_CFG_SHIFT_MODE BIT(28) +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_MSG_CODE_32BIT 0xF +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_MSG_CODE_64BIT 0xFF + +#define IATU_LWR_BASE_ADDR_OFF_OUTBOUND_0 0x90C +#define IATU_UPPER_BASE_ADDR_OFF_OUTBOUND_0 0x910 +#define IATU_LIMIT_ADDR_OFF_OUTBOUND_0 0x914 +#define IATU_LWR_TARGET_ADDR_OFF_OUTBOUND_0 0x918 +#define IATU_UPPER_TARGET_ADDR_OFF_OUTBOUND_0 0x91C + +/* Clock and resets */ +#define CORE_CONTROL 0x000 +#define APP_LTSSM_ENABLE BIT(4) +#define DEVICE_TYPE (BIT(3) | BIT(2) | BIT(1) | BIT(0)) + +#define AXI_CLK_STOP 0x004 +#define DBI_ACLK_STOP BIT(8) +#define SLV_ACLK_STOP BIT(4) +#define MSTR_ACLK_STOP BIT(0) +#define DBI_CSYSREQ_REG BIT(9) +#define SLV_CSYSREQ_REG BIT(5) +#define MSTR_CSYSREQ_REG BIT(1) + +#define RESET_CONTROL_1 0x00C +#define PERST_N_O_REG BIT(5) +#define PERST_N_I_REG BIT(4) +#define BUTTON_RST_N_REG BIT(1) +#define PWUP_RST_N_REG BIT(0) + +#define RESET_CONTROL_2 0x010 + +#define RESET_SELECT_1 0x014 +#define SQU_RST_SEL BIT(29) +#define PHY_RST_SEL BIT(28) +#define PWR_RST_SEL BIT(24) +#define STI_RST_SEL BIT(20) +#define N_STI_RST_SEL BIT(16) +#define CORE_RST_SEL BIT(12) +#define PERST_SEL BIT(4) +#define BUTTON_RST_SEL BIT(1) +#define PWUP_RST_SEL BIT(0) + +#define RESET_SELECT_2 0x018 +#define DBI_ARST_SEL BIT(8) +#define SLV_ARST_SEL BIT(4) +#define MSTR_ARST_SEL BIT(0) + +#define EM_CONTROL 0x030 +#define PRE_DET_STT_REG BIT(4) + +#define EM_SELECT 0x034 +#define PRE_DET_STT_SEL BIT(4) + +#define PM_CONTROL_2 0x050 +#define SYS_AUX_PWR_DET BIT(8) + +#define PHY_CONFIG_COM_6 0x114 +#define PIPE_PORT_SEL GENMASK(1, 0) + +#define LINK_MONITOR 0x210 +#define SMLH_LINK_UP BIT(0) + +#define LINK_CAPABILITIES_REG 0x07C +#define PCIE_CAP_MAX_LINK_WIDTH GENMASK(7, 4) +#define PCIE_CAP_MAX_LINK_SPEED GENMASK(3, 0) + +#define LINK_CONTROL_LINK_STATUS_REG 0x080 +#define PCIE_CAP_NEGO_LINK_WIDTH GENMASK(23, 20) +#define PCIE_CAP_LINK_SPEED GENMASK(19, 16) + +#define TYPE1_CLASS_CODE_REV_ID_REG 0x008 +#define BASE_CLASS_CODE 0xFF000000 +#define BASE_CLASS_CODE_VALUE 0x06 +#define SUBCLASS_CODE 0x00FF0000 +#define SUBCLASS_CODE_VALUE 0x04 +#define PROGRAM_INTERFACE 0x0000FF00 +#define PROGRAM_INTERFACE_VALUE 0x00 + +#define GEN2_CONTROL_OFF 0x80c +#define DIRECT_SPEED_CHANGE BIT(17) + +#define MISC_CONTROL_1_OFF 0x8BC +#define DBI_RO_WR_EN BIT(0) + +static void or_writel(void *base, u32 offs, u32 val) +{ + writel(readl(base + offs) | val, base + offs); +} + +static void masked_writel(void *base, u32 offs, u32 mask, u32 val) +{ + u32 data; + int shift = ffs(mask); /* Note that ffs() returns 1 for 0x1 */ + + if (val && shift > 1) + val <<= shift - 1; + + if (mask != ~0) + data = (readl(base + offs) & ~mask) | val; + else + data = val; + + writel(data, base + offs); +} + +static u32 masked_readl(void *base, u32 offs, u32 mask) +{ + u32 data; + int shift = ffs(mask); /* Note that ffs() returns 1 for 0x1 */ + + data = readl(base + offs); + + if (mask != ~0) + data &= mask; + if (shift > 1) + data >>= shift - 1; + + return data; +} + +/* + * Since SynQuacer's PCIe RC is expected to be initialized in the + * firmware (including U-Boot), devicetree doesn't have control + * blocks. + * + * Thus, this will initialize the PCIe RC with fixed addresses. + */ + +#define SYNQUACER_PCI_SEG0_CONFIG_BASE 0x60000000 +#define SYNQUACER_PCI_SEG0_CONFIG_SIZE 0x07f00000 +#define SYNQUACER_PCI_SEG0_DBI_BASE 0x583d0000 +#define SYNQUACER_PCI_SEG0_EXS_BASE 0x58390000 + +#define SYNQUACER_PCI_SEG1_CONFIG_BASE 0x70000000 +#define SYNQUACER_PCI_SEG1_CONFIG_SIZE 0x07f00000 +#define SYNQUACER_PCI_SEG1_DBI_BASE 0x583c0000 +#define SYNQUACER_PCI_SEG1_EXS_BASE 0x58380000 + +#define SIZE_16KB 0x00004000 +#define SIZE_64KB 0x00010000 +#define SIZE_1MB 0x00100000 + +#define SYNQUACER_PCI_DBI_SIZE SIZE_16KB +#define SYNQUACER_PCI_EXS_SIZE SIZE_64KB + +#define NUM_SQ_PCI_RC 2 + +static const struct synquacer_pcie_base { + phys_addr_t cfg_base; + phys_addr_t dbi_base; + phys_addr_t exs_base; +} synquacer_pci_bases[NUM_SQ_PCI_RC] = { + { + .cfg_base = SYNQUACER_PCI_SEG0_CONFIG_BASE, + .dbi_base = SYNQUACER_PCI_SEG0_DBI_BASE, + .exs_base = SYNQUACER_PCI_SEG0_EXS_BASE, + }, { + .cfg_base = SYNQUACER_PCI_SEG1_CONFIG_BASE, + .dbi_base = SYNQUACER_PCI_SEG1_DBI_BASE, + .exs_base = SYNQUACER_PCI_SEG1_EXS_BASE, + }, +}; + +/** + * struct synquacer_ecam_pcie - synquacer_ecam PCIe controller state + * @cfg_base: The base address of memory mapped configuration space + */ +struct synquacer_ecam_pcie { + void *cfg_base; + pci_size_t size; + void *dbi_base; + void *exs_base; + int first_busno; + + struct pci_region mem; + struct pci_region io; + struct pci_region mem64; +}; + +DECLARE_GLOBAL_DATA_PTR; + +/** + * pci_synquacer_ecam_conf_address() - Calculate the address of a config access + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @paddress: Pointer to the pointer to write the calculates address to + * + * Calculates the address that should be accessed to perform a PCIe + * configuration space access for a given device identified by the PCIe + * controller device @pcie and the bus, device & function numbers in @bdf. If + * access to the device is not valid then the function will return an error + * code. Otherwise the address to access will be written to the pointer pointed + * to by @paddress. + */ +static int pci_synquacer_ecam_conf_address(const struct udevice *bus, + pci_dev_t bdf, uint offset, + void **paddress) +{ + struct synquacer_ecam_pcie *pcie = dev_get_priv(bus); + void *addr; + + addr = pcie->cfg_base; + addr += (PCI_BUS(bdf) - pcie->first_busno) << 20; + addr += PCI_DEV(bdf) << 15; + addr += PCI_FUNC(bdf) << 12; + addr += offset; + *paddress = addr; + + return 0; +} + +static bool pci_synquacer_ecam_addr_valid(const struct udevice *bus, + pci_dev_t bdf) +{ + struct synquacer_ecam_pcie *pcie = dev_get_priv(bus); + int num_buses = DIV_ROUND_UP(pcie->size, 1 << 16); + + /* + * The Synopsys DesignWare PCIe controller in ECAM mode will not filter + * type 0 config TLPs sent to devices 1 and up on its downstream port, + * resulting in devices appearing multiple times on bus 0 unless we + * filter out those accesses here. + */ + if (PCI_BUS(bdf) == pcie->first_busno && PCI_DEV(bdf) > 0) + return false; + + return (PCI_BUS(bdf) >= pcie->first_busno && + PCI_BUS(bdf) < pcie->first_busno + num_buses); +} + +/** + * pci_synquacer_ecam_read_config() - Read from configuration space + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @valuep: A pointer at which to store the read value + * @size: Indicates the size of access to perform + * + * Read a value of size @size from offset @offset within the configuration + * space of the device identified by the bus, device & function numbers in @bdf + * on the PCI bus @bus. + */ +static int pci_synquacer_ecam_read_config(const struct udevice *bus, + pci_dev_t bdf, uint offset, + ulong *valuep, enum pci_size_t size) +{ + if (!pci_synquacer_ecam_addr_valid(bus, bdf)) { + *valuep = pci_get_ff(size); + return 0; + } + + return pci_generic_mmap_read_config(bus, pci_synquacer_ecam_conf_address, + bdf, offset, valuep, size); +} + +/** + * pci_synquacer_ecam_write_config() - Write to configuration space + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @value: The value to write + * @size: Indicates the size of access to perform + * + * Write the value @value of size @size from offset @offset within the + * configuration space of the device identified by the bus, device & function + * numbers in @bdf on the PCI bus @bus. + */ +static int pci_synquacer_ecam_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + if (!pci_synquacer_ecam_addr_valid(bus, bdf)) + return 0; + + return pci_generic_mmap_write_config(bus, pci_synquacer_ecam_conf_address, + bdf, offset, value, size); +} + +/** + * pci_synquacer_ecam_of_to_plat() - Translate from DT to device state + * @dev: A pointer to the device being operated on + * + * Translate relevant data from the device tree pertaining to device @dev into + * state that the driver will later make use of. This state is stored in the + * device's private data structure. + * + * Return: 0 on success, else -EINVAL + */ +static int pci_synquacer_ecam_of_to_plat(struct udevice *dev) +{ + struct synquacer_ecam_pcie *pcie = dev_get_priv(dev); + struct fdt_resource reg_res; + int i, err; + + debug("%s: called for %s\n", __func__, dev->name); + + err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg", + 0, ®_res); + if (err < 0) { + pr_err("\"reg\" resource not found\n"); + return err; + } + + /* Find the correct pair of the DBI/EXS base address */ + for (i = 0; i < NUM_SQ_PCI_RC; i++) { + if (synquacer_pci_bases[i].cfg_base == reg_res.start) + break; + } + if (i == NUM_SQ_PCI_RC) { + pr_err("Unknown ECAM base address %lx.\n", + (unsigned long)reg_res.start); + return -ENOENT; + } + pcie->dbi_base = map_physmem(synquacer_pci_bases[i].dbi_base, + SYNQUACER_PCI_DBI_SIZE, MAP_NOCACHE); + if (!pcie->dbi_base) { + pr_err("Failed to map DBI for %s\n", dev->name); + return -ENOMEM; + } + + pcie->exs_base = map_physmem(synquacer_pci_bases[i].exs_base, + SYNQUACER_PCI_EXS_SIZE, MAP_NOCACHE); + if (!pcie->exs_base) { + pr_err("Failed to map EXS for %s\n", dev->name); + return -ENOMEM; + } + + pcie->size = fdt_resource_size(®_res); + pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE); + if (!pcie->cfg_base) { + pr_err("Failed to map config space for %s\n", dev->name); + return -ENOMEM; + } + debug("mappings DBI: %p EXS: %p CFG: %p\n", pcie->dbi_base, pcie->exs_base, pcie->cfg_base); + + return 0; +} + +static void pci_synquacer_pre_init(struct synquacer_ecam_pcie *pcie) +{ + void *base = pcie->exs_base; + + masked_writel(base, EM_SELECT, PRE_DET_STT_SEL, 0); + masked_writel(base, EM_CONTROL, PRE_DET_STT_REG, 0); + masked_writel(base, EM_CONTROL, PRE_DET_STT_REG, 1); + + /* 1: Assert all PHY / LINK resets */ + masked_writel(base, RESET_SELECT_1, PERST_SEL, 0); + masked_writel(base, RESET_CONTROL_1, PERST_N_I_REG, 0); + masked_writel(base, RESET_CONTROL_1, PERST_N_O_REG, 0); + + /* Device Reset(PERST#) is effective afrer Set device_type (RC) */ + masked_writel(base, RESET_SELECT_1, PWUP_RST_SEL, 0); + masked_writel(base, RESET_CONTROL_1, PWUP_RST_N_REG, 0); + masked_writel(base, RESET_SELECT_1, BUTTON_RST_SEL, 0); + masked_writel(base, RESET_CONTROL_1, BUTTON_RST_N_REG, 0); + masked_writel(base, RESET_SELECT_1, PWR_RST_SEL, 1); + masked_writel(base, RESET_SELECT_2, MSTR_ARST_SEL, 1); + masked_writel(base, RESET_SELECT_2, SLV_ARST_SEL, 1); + masked_writel(base, RESET_SELECT_2, DBI_ARST_SEL, 1); + masked_writel(base, RESET_SELECT_1, CORE_RST_SEL, 1); + masked_writel(base, RESET_SELECT_1, STI_RST_SEL, 1); + masked_writel(base, RESET_SELECT_1, N_STI_RST_SEL, 1); + masked_writel(base, RESET_SELECT_1, SQU_RST_SEL, 1); + masked_writel(base, RESET_SELECT_1, PHY_RST_SEL, 1); + + /* 2: Set P<n>_app_ltssm_enable='0' for reprogramming before linkup. */ + masked_writel(base, CORE_CONTROL, APP_LTSSM_ENABLE, 0); + + /* 3: Set device_type (RC) */ + masked_writel(base, CORE_CONTROL, DEVICE_TYPE, 4); +} + +static void pci_synquacer_dbi_init(void *dbi_base) +{ + masked_writel(dbi_base, MISC_CONTROL_1_OFF, DBI_RO_WR_EN, 1); + /* 4 Lanes */ + masked_writel(dbi_base, LINK_CAPABILITIES_REG, + PCIE_CAP_MAX_LINK_WIDTH, 4); + /* Gen 2 */ + masked_writel(dbi_base, LINK_CAPABILITIES_REG, + PCIE_CAP_MAX_LINK_SPEED, 2); + + masked_writel(dbi_base, TYPE1_CLASS_CODE_REV_ID_REG, + BASE_CLASS_CODE, BASE_CLASS_CODE_VALUE); + masked_writel(dbi_base, TYPE1_CLASS_CODE_REV_ID_REG, + SUBCLASS_CODE, SUBCLASS_CODE_VALUE); + masked_writel(dbi_base, TYPE1_CLASS_CODE_REV_ID_REG, + PROGRAM_INTERFACE, PROGRAM_INTERFACE_VALUE); + + masked_writel(dbi_base, MISC_CONTROL_1_OFF, DBI_RO_WR_EN, 0); +} + +static void pcie_sq_prog_outbound_atu(void *dbi_base, int index, + u64 cpu_base, u64 pci_base, u64 size, + u32 type, u32 flags) +{ + debug("%s: %p, %d, %llx, %llx, %llx, %x, %x\n", __func__, + dbi_base, index, cpu_base, pci_base, size, type, flags); + + writel(IATU_VIEWPORT_OUTBOUND | IATU_VIEWPORT_REGION_INDEX(index), + dbi_base + IATU_VIEWPORT_OFF); + + writel((u32)(cpu_base & 0xffffffff), + dbi_base + IATU_LWR_BASE_ADDR_OFF_OUTBOUND_0); + writel((u32)(cpu_base >> 32), + dbi_base + IATU_UPPER_BASE_ADDR_OFF_OUTBOUND_0); + writel((u32)(cpu_base + size - 1), + dbi_base + IATU_LIMIT_ADDR_OFF_OUTBOUND_0); + + writel((u32)(pci_base & 0xffffffff), + dbi_base + IATU_LWR_TARGET_ADDR_OFF_OUTBOUND_0); + writel((u32)(pci_base >> 32), + dbi_base + IATU_UPPER_TARGET_ADDR_OFF_OUTBOUND_0); + + writel(type, dbi_base + IATU_REGION_CTRL_1_OFF_OUTBOUND_0); + writel(IATU_REGION_CTRL_2_OFF_OUTBOUND_0_REGION_EN | flags, + dbi_base + IATU_REGION_CTRL_2_OFF_OUTBOUND_0); +} + +static void pci_synquacer_post_init(struct synquacer_ecam_pcie *pcie) +{ + void *base = pcie->exs_base; + + /* + * 4: Set Bifurcation 1=disable 4=able + * 5: Supply Reference (It has executed) + * 6: Wait for 10usec (Reference Clocks is stable) + * 7: De assert PERST# + */ + masked_writel(base, RESET_CONTROL_1, PERST_N_I_REG, 1); + masked_writel(base, RESET_CONTROL_1, PERST_N_O_REG, 1); + + /* 8: Assert SYS_AUX_PWR_DET */ + masked_writel(base, PM_CONTROL_2, SYS_AUX_PWR_DET, 1); + + /* 9: Supply following clocks */ + masked_writel(base, AXI_CLK_STOP, MSTR_CSYSREQ_REG, 1); + masked_writel(base, AXI_CLK_STOP, MSTR_ACLK_STOP, 0); + masked_writel(base, AXI_CLK_STOP, SLV_CSYSREQ_REG, 1); + masked_writel(base, AXI_CLK_STOP, SLV_ACLK_STOP, 0); + masked_writel(base, AXI_CLK_STOP, DBI_CSYSREQ_REG, 1); + masked_writel(base, AXI_CLK_STOP, DBI_ACLK_STOP, 0); + + /* + * 10: De assert PHY reset + * 11: De assert LINK's PMC reset + */ + masked_writel(base, RESET_CONTROL_1, PWUP_RST_N_REG, 1); + masked_writel(base, RESET_CONTROL_1, BUTTON_RST_N_REG, 1); + + /* 12: PHY auto + * 13: Wrapper auto + * 14-17: PHY auto + * 18: Wrapper auto + * 19: Update registers through DBI AXI Slave interface + */ + pci_synquacer_dbi_init(pcie->dbi_base); + + or_writel(pcie->dbi_base, PCI_COMMAND, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* Force link speed change to Gen2 at link up */ + or_writel(pcie->dbi_base, GEN2_CONTROL_OFF, DIRECT_SPEED_CHANGE); + + /* Region 0: MMIO32 range */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 0, + pcie->mem.phys_start, + pcie->mem.bus_start, + pcie->mem.size, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_MEM | + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TH, + IATU_REGION_CTRL_2_OFF_OUTBOUND_0_MSG_CODE_32BIT); + + /* Region 1: Type 0 config space */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 1, + (u64)pcie->cfg_base, + 0, + SIZE_64KB, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG0, + IATU_REGION_CTRL_2_OFF_OUTBOUND_0_CFG_SHIFT_MODE); + + /* Region 2: Type 1 config space */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 2, + (u64)pcie->cfg_base + SIZE_64KB, + 0, + (u64)pcie->io.phys_start - (u64)pcie->cfg_base - SIZE_64KB, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG1, + IATU_REGION_CTRL_2_OFF_OUTBOUND_0_CFG_SHIFT_MODE); + + /* Region 3: port I/O range */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 3, + pcie->io.phys_start, + pcie->io.bus_start, + pcie->io.size, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_IO, + 0); + + /* Region 4: MMIO64 range */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 4, + pcie->mem64.phys_start, + pcie->mem64.bus_start, + pcie->mem64.size, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_MEM | + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TH, + IATU_REGION_CTRL_2_OFF_OUTBOUND_0_MSG_CODE_32BIT); + + /* enable link */ + if (masked_readl(base, CORE_CONTROL, APP_LTSSM_ENABLE) == 0) + masked_writel(base, CORE_CONTROL, APP_LTSSM_ENABLE, 1); +} + +static int pci_synquacer_ecam_probe(struct udevice *dev) +{ + struct synquacer_ecam_pcie *pcie = dev_get_priv(dev); + struct udevice *ctlr = pci_get_controller(dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + + debug("Probe synquacer pcie for bus %d\n", dev_seq(dev)); + pcie->first_busno = dev_seq(dev); + + /* Store the IO and MEM windows settings for configuring ATU */ + pcie->io.phys_start = hose->regions[0].phys_start; /* IO base */ + pcie->io.bus_start = hose->regions[0].bus_start; /* IO_bus_addr */ + pcie->io.size = hose->regions[0].size; /* IO size */ + + pcie->mem.phys_start = hose->regions[1].phys_start; /* MEM base */ + pcie->mem.bus_start = hose->regions[1].bus_start; /* MEM_bus_addr */ + pcie->mem.size = hose->regions[1].size; /* MEM size */ + + pcie->mem64.phys_start = hose->regions[2].phys_start; /* MEM64 base */ + pcie->mem64.bus_start = hose->regions[2].bus_start; /* MEM64_bus_addr */ + pcie->mem64.size = hose->regions[2].size; /* MEM64 size */ + + pci_synquacer_pre_init(pcie); + + mdelay(150); + + pci_synquacer_post_init(pcie); + + /* It takes a while to stabilize the PCIe bus for scanning */ + mdelay(100); + + return 0; +} + +static const struct dm_pci_ops pci_synquacer_ecam_ops = { + .read_config = pci_synquacer_ecam_read_config, + .write_config = pci_synquacer_ecam_write_config, +}; + +static const struct udevice_id pci_synquacer_ecam_ids[] = { + { .compatible = "socionext,synquacer-pcie-ecam" }, + { } +}; + +U_BOOT_DRIVER(pci_synquacer_ecam) = { + .name = "pci_synquacer_ecam", + .id = UCLASS_PCI, + .of_match = pci_synquacer_ecam_ids, + .ops = &pci_synquacer_ecam_ops, + .probe = pci_synquacer_ecam_probe, + .of_to_plat = pci_synquacer_ecam_of_to_plat, + .priv_auto = sizeof(struct synquacer_ecam_pcie), +}; |