diff options
author | Tom Rini <trini@konsulko.com> | 2021-05-22 15:47:14 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2021-07-08 05:22:42 +0300 |
commit | 570c3dcfc153e0f18bd897630236da6605dcbe7e (patch) | |
tree | ed107cfe6a18ec50aadb7cec478be61a60dba9f8 /drivers | |
parent | d7221d0d660755fd395734afa4cce2948e5e5fa8 (diff) | |
download | u-boot-570c3dcfc153e0f18bd897630236da6605dcbe7e.tar.xz |
arm: Remove spear600 boards and the rest of SPEAr support
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM. Remove them. As this is
the last of the SPEAr platforms, so remove the rest of the remaining
support as well.
Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpio/spear_gpio.c | 89 | ||||
-rw-r--r-- | drivers/i2c/Kconfig | 10 | ||||
-rw-r--r-- | drivers/i2c/designware_i2c.c | 11 | ||||
-rw-r--r-- | drivers/mtd/nand/raw/fsmc_nand.c | 49 | ||||
-rw-r--r-- | drivers/usb/host/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/host/ehci-spear.c | 77 |
7 files changed, 0 insertions, 238 deletions
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 8541ba0b0a..06dfc32fa5 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_RCAR_GPIO) += gpio-rcar.o obj-$(CONFIG_RZA1_GPIO) += gpio-rza1.o obj-$(CONFIG_S5P) += s5p_gpio.o obj-$(CONFIG_SANDBOX_GPIO) += sandbox.o -obj-$(CONFIG_SPEAR_GPIO) += spear_gpio.o obj-$(CONFIG_TEGRA_GPIO) += tegra_gpio.o obj-$(CONFIG_TEGRA186_GPIO) += tegra186_gpio.o obj-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o diff --git a/drivers/gpio/spear_gpio.c b/drivers/gpio/spear_gpio.c deleted file mode 100644 index 4e4cd12545..0000000000 --- a/drivers/gpio/spear_gpio.c +++ /dev/null @@ -1,89 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2012 Stefan Roese <sr@denx.de> - */ - -/* - * Driver for SPEAr600 GPIO controller - */ - -#include <common.h> -#include <malloc.h> -#include <asm/arch/hardware.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <errno.h> - -static int gpio_direction(unsigned gpio, - enum gpio_direction direction) -{ - struct gpio_regs *regs = (struct gpio_regs *)CONFIG_GPIO_BASE; - u32 val; - - val = readl(®s->gpiodir); - - if (direction == GPIO_DIRECTION_OUT) - val |= 1 << gpio; - else - val &= ~(1 << gpio); - - writel(val, ®s->gpiodir); - - return 0; -} - -int gpio_set_value(unsigned gpio, int value) -{ - struct gpio_regs *regs = (struct gpio_regs *)CONFIG_GPIO_BASE; - - if (value) - writel(1 << gpio, ®s->gpiodata[DATA_REG_ADDR(gpio)]); - else - writel(0, ®s->gpiodata[DATA_REG_ADDR(gpio)]); - - return 0; -} - -int gpio_get_value(unsigned gpio) -{ - struct gpio_regs *regs = (struct gpio_regs *)CONFIG_GPIO_BASE; - u32 val; - - val = readl(®s->gpiodata[DATA_REG_ADDR(gpio)]); - - return !!val; -} - -int gpio_request(unsigned gpio, const char *label) -{ - if (gpio >= SPEAR_GPIO_COUNT) - return -EINVAL; - - return 0; -} - -int gpio_free(unsigned gpio) -{ - return 0; -} - -void gpio_toggle_value(unsigned gpio) -{ - gpio_set_value(gpio, !gpio_get_value(gpio)); -} - -int gpio_direction_input(unsigned gpio) -{ - return gpio_direction(gpio, GPIO_DIRECTION_IN); -} - -int gpio_direction_output(unsigned gpio, int value) -{ - int ret = gpio_direction(gpio, GPIO_DIRECTION_OUT); - - if (ret < 0) - return ret; - - gpio_set_value(gpio, value); - return 0; -} diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index de57ab928a..35d6e2c8ec 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -136,16 +136,6 @@ config SYS_I2C_DW controller is used in various SoCs, e.g. the ST SPEAr, Altera SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs. -config SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED - bool "DW I2C Enable Status Register not supported" - depends on SYS_I2C_DW && \ - (TARGET_SPEAR600 || TARGET_X600) - default y - help - Some versions of the Designware I2C controller do not support the - enable status register. This config option can be enabled in such - cases. - config SYS_I2C_ASPEED bool "Aspeed I2C Controller" depends on DM_I2C && ARCH_ASPEED diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index 072803691e..e57eed0f6c 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -24,16 +24,6 @@ */ #define DW_I2C_COMP_TYPE 0x44570140 -#ifdef CONFIG_SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED -static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) -{ - u32 ena = enable ? IC_ENABLE_0B : 0; - - writel(ena, &i2c_base->ic_enable); - - return 0; -} -#else static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) { u32 ena = enable ? IC_ENABLE_0B : 0; @@ -55,7 +45,6 @@ static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) return -ETIMEDOUT; } -#endif /* High and low times in different speed modes (in ns) */ enum { diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index 1f4c74f0f6..1c24710b2d 100644 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -389,55 +389,6 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, return 0; } -#ifndef CONFIG_SPL_BUILD -/* - * fsmc_nand_switch_ecc - switch the ECC operation between different engines - * - * @eccstrength - the number of bits that could be corrected - * (1 - HW, 4 - SW BCH4) - */ -int fsmc_nand_switch_ecc(uint32_t eccstrength) -{ - struct nand_chip *nand; - struct mtd_info *mtd; - int err; - - /* - * This functions is only called on SPEAr600 platforms, supporting - * 1 bit HW ECC. The BCH8 HW ECC (FSMC_VER8) from the ST-Ericsson - * Nomadik SoC is currently supporting this fsmc_nand_switch_ecc() - * function, as it doesn't need to switch to a different ECC layout. - */ - mtd = get_nand_dev_by_index(nand_curr_device); - nand = mtd_to_nand(mtd); - - /* Setup the ecc configurations again */ - if (eccstrength == 1) { - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.bytes = 3; - nand->ecc.strength = 1; - nand->ecc.layout = &fsmc_ecc1_layout; - nand->ecc.calculate = fsmc_read_hwecc; - nand->ecc.correct = nand_correct_data; - } else if (eccstrength == 4) { - /* - * .calculate .correct and .bytes will be set in - * nand_scan_tail() - */ - nand->ecc.mode = NAND_ECC_SOFT_BCH; - nand->ecc.strength = 4; - nand->ecc.layout = NULL; - } else { - printf("Error: ECC strength %d not supported!\n", eccstrength); - } - - /* Update NAND handling after ECC mode switch */ - err = nand_scan_tail(mtd); - - return err; -} -#endif /* CONFIG_SPL_BUILD */ - int fsmc_nand_init(struct nand_chip *nand) { static int chip_nr; diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index a12e8f2702..eb6fe9f6b3 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -36,7 +36,6 @@ obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o -obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c deleted file mode 100644 index 3e87e0c7fd..0000000000 --- a/drivers/usb/host/ehci-spear.c +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Armando Visconti, ST Micoelectronics, <armando.visconti@st.com>. - * - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - */ - -#include <common.h> -#include <log.h> -#include <asm/io.h> -#include <usb.h> -#include <linux/delay.h> -#include "ehci.h" -#include <asm/arch/hardware.h> -#include <asm/arch/spr_misc.h> - -static void spear6xx_usbh_stop(void) -{ - struct misc_regs *const misc_p = - (struct misc_regs *)CONFIG_SPEAR_MISCBASE; - u32 periph1_rst = readl(misc_p->periph1_rst); - - periph1_rst |= PERIPH_USBH1 | PERIPH_USBH2; - writel(periph1_rst, misc_p->periph1_rst); - - udelay(1000); - periph1_rst &= ~(PERIPH_USBH1 | PERIPH_USBH2); - writel(periph1_rst, misc_p->periph1_rst); -} - -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - u32 ehci = 0; - - switch (index) { - case 0: - ehci = CONFIG_SYS_UHC0_EHCI_BASE; - break; - case 1: - ehci = CONFIG_SYS_UHC1_EHCI_BASE; - break; - default: - printf("ERROR: wrong controller index!\n"); - break; - }; - - *hccr = (struct ehci_hccr *)(ehci + 0x100); - *hcor = (struct ehci_hcor *)((uint32_t) *hccr + - HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - - debug("SPEAr-ehci: init hccr %x and hcor %x hc_length %d\n", - (uint32_t)*hccr, (uint32_t)*hcor, - (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - - return 0; -} - -/* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. - */ -int ehci_hcd_stop(int index) -{ -#if defined(CONFIG_SPEAR600) - spear6xx_usbh_stop(); -#endif - - return 0; -} |