Merge tag 'xilinx-for-v2020.10-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2020.10-rc3

- Fix fdtfile variable setup
- Fix bootm_*/fdt_high/initrd_high variables handling
- Fix Kconfig dependencies for Xilinx drivers
- Fix booting u-boot from lowest memory
- Fix firmware payload argument count for Versal
- Fix dfu configurations
- Fix mio_bank property handling
- Fix and align code around ID detection
- Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG
- Simplify logic around reading MAC from eeprom
- Decrease malloc length for zynqmp mini qspi
- Enable preboot for ZynqMP and Versal

i2c:
- Fix i2c eeprom partitions handling

mmc:
- Fix logic around HS mode enabling and use proper functions

11 files changed, 77 insertions, 83 deletions

diff --git a/drivers/clk/clk_versal.c b/drivers/clk/clk_versal.c
index 6f82b60f04..d93b860aed 100644
--- a/drivers/clk/clk_versal.c
+++ b/drivers/clk/clk_versal.c
@@ -68,23 +68,6 @@
 #define CLOCK_NODE_TYPE_DIV	4
 #define CLOCK_NODE_TYPE_GATE	6
 
-enum pm_query_id {
-	PM_QID_INVALID,
-	PM_QID_CLOCK_GET_NAME,
-	PM_QID_CLOCK_GET_TOPOLOGY,
-	PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
-	PM_QID_CLOCK_GET_PARENTS,
-	PM_QID_CLOCK_GET_ATTRIBUTES,
-	PM_QID_PINCTRL_GET_NUM_PINS,
-	PM_QID_PINCTRL_GET_NUM_FUNCTIONS,
-	PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS,
-	PM_QID_PINCTRL_GET_FUNCTION_NAME,
-	PM_QID_PINCTRL_GET_FUNCTION_GROUPS,
-	PM_QID_PINCTRL_GET_PIN_GROUPS,
-	PM_QID_CLOCK_GET_NUM_CLOCKS,
-	PM_QID_CLOCK_GET_MAX_DIVISOR,
-};
-
 enum clk_type {
 	CLK_TYPE_OUTPUT,
 	CLK_TYPE_EXTERNAL,
diff --git a/drivers/firmware/firmware-zynqmp.c b/drivers/firmware/firmware-zynqmp.c
index 66edc16930..903a8f5878 100644
--- a/drivers/firmware/firmware-zynqmp.c
+++ b/drivers/firmware/firmware-zynqmp.c
@@ -37,6 +37,7 @@ static int ipi_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
 	if (!(zynqmp_power.tx_chan.dev) || !(&zynqmp_power.rx_chan.dev))
 		return -EINVAL;
 
+	debug("%s, Sending IPI message with ID: 0x%0x\n", __func__, req[0]);
 	msg.buf = (u32 *)req;
 	msg.len = req_len;
 	ret = mbox_send(&zynqmp_power.tx_chan, &msg);
@@ -54,14 +55,6 @@ static int ipi_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
 	return ret;
 }
 
-static int send_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
-{
-	if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3)
-		return ipi_req(req, req_len, res, res_maxlen);
-
-	return xilinx_pm_request(req[0], 0, 0, 0, 0, res);
-}
-
 unsigned int zynqmp_firmware_version(void)
 {
 	int ret;
@@ -74,9 +67,9 @@ unsigned int zynqmp_firmware_version(void)
 	 * asking PMUFW again.
 	 **/
 	if (pm_api_version == ZYNQMP_PM_VERSION_INVALID) {
-		const u32 request[] = { PM_GET_API_VERSION };
 
-		ret = send_req(request, ARRAY_SIZE(request), ret_payload, 2);
+		ret = xilinx_pm_request(PM_GET_API_VERSION, 0, 0, 0, 0,
+					ret_payload);
 		if (ret)
 			panic("PMUFW is not found - Please load it!\n");
 
@@ -97,16 +90,13 @@ unsigned int zynqmp_firmware_version(void)
  */
 void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size)
 {
-	const u32 request[] = {
-		PM_SET_CONFIGURATION,
-		(u32)((u64)cfg_obj)
-	};
-	u32 response = 0;
 	int err;
+	u32 ret_payload[PAYLOAD_ARG_CNT];
 
 	printf("Loading new PMUFW cfg obj (%ld bytes)\n", size);
 
-	err = send_req(request, ARRAY_SIZE(request), &response, 1);
+	err = xilinx_pm_request(PM_SET_CONFIGURATION, (u32)(u64)cfg_obj, 0, 0,
+				0, ret_payload);
 	if (err == XST_PM_NO_ACCESS) {
 		printf("PMUFW no permission to change config object\n");
 		return;
@@ -115,10 +105,10 @@ void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size)
 	if (err)
 		printf("Cannot load PMUFW configuration object (%d)\n", err);
 
-	if (response)
-		printf("PMUFW returned 0x%08x status!\n", response);
+	if (ret_payload[0])
+		printf("PMUFW returned 0x%08x status!\n", ret_payload[0]);
 
-	if ((err || response) && IS_ENABLED(CONFIG_SPL_BUILD))
+	if ((err || ret_payload[0]) && IS_ENABLED(CONFIG_SPL_BUILD))
 		panic("PMUFW config object loading failed in EL3\n");
 }
 
@@ -164,32 +154,44 @@ U_BOOT_DRIVER(zynqmp_power) = {
 int __maybe_unused xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2,
 				     u32 arg3, u32 *ret_payload)
 {
-	/*
-	 * Added SIP service call Function Identifier
-	 * Make sure to stay in x0 register
-	 */
-	struct pt_regs regs;
+	debug("%s at EL%d, API ID: 0x%0x\n", __func__, current_el(), api_id);
 
-	if (current_el() == 3) {
-		printf("%s: Can't call SMC from EL3 context\n", __func__);
+	if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
+#if defined(CONFIG_ZYNQMP_IPI)
+		/*
+		 * Use fixed payload and arg size as the EL2 call. The firmware
+		 * is capable to handle PMUFW_PAYLOAD_ARG_CNT bytes but the
+		 * firmware API is limited by the SMC call size
+		 */
+		u32 regs[] = {api_id, arg0, arg1, arg2, arg3};
+
+		ipi_req(regs, PAYLOAD_ARG_CNT, ret_payload, PAYLOAD_ARG_CNT);
+#else
 		return -EPERM;
-	}
-
-	regs.regs[0] = PM_SIP_SVC | api_id;
-	regs.regs[1] = ((u64)arg1 << 32) | arg0;
-	regs.regs[2] = ((u64)arg3 << 32) | arg2;
-
-	smc_call(&regs);
+#endif
+	} else {
+		/*
+		 * Added SIP service call Function Identifier
+		 * Make sure to stay in x0 register
+		 */
+		struct pt_regs regs;
+
+		regs.regs[0] = PM_SIP_SVC | api_id;
+		regs.regs[1] = ((u64)arg1 << 32) | arg0;
+		regs.regs[2] = ((u64)arg3 << 32) | arg2;
+
+		smc_call(&regs);
+
+		if (ret_payload) {
+			ret_payload[0] = (u32)regs.regs[0];
+			ret_payload[1] = upper_32_bits(regs.regs[0]);
+			ret_payload[2] = (u32)regs.regs[1];
+			ret_payload[3] = upper_32_bits(regs.regs[1]);
+			ret_payload[4] = (u32)regs.regs[2];
+		}
 
-	if (ret_payload) {
-		ret_payload[0] = (u32)regs.regs[0];
-		ret_payload[1] = upper_32_bits(regs.regs[0]);
-		ret_payload[2] = (u32)regs.regs[1];
-		ret_payload[3] = upper_32_bits(regs.regs[1]);
-		ret_payload[4] = (u32)regs.regs[2];
 	}
-
-	return regs.regs[0];
+	return (ret_payload) ? ret_payload[0] : 0;
 }
 
 static const struct udevice_id zynqmp_firmware_ids[] = {
diff --git a/drivers/fpga/versalpl.c b/drivers/fpga/versalpl.c
index 8e2ef4f0da..c44a7d3455 100644
--- a/drivers/fpga/versalpl.c
+++ b/drivers/fpga/versalpl.c
@@ -32,7 +32,7 @@ static int versal_load(xilinx_desc *desc, const void *buf, size_t bsize,
 	ulong bin_buf;
 	int ret;
 	u32 buf_lo, buf_hi;
-	u32 ret_payload[5];
+	u32 ret_payload[PAYLOAD_ARG_CNT];
 
 	bin_buf = versal_align_dma_buffer((ulong *)buf, bsize);
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 11e9a17f97..202fcc6f47 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -381,8 +381,8 @@ config MVEBU_GPIO
 
 config ZYNQ_GPIO
 	bool "Zynq GPIO driver"
-	depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
-	default y
+	depends on DM_GPIO
+	default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
 	help
 	  Supports GPIO access on Zynq SoC.
 
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index dec6dc9dfa..8ae54e1e93 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -88,7 +88,7 @@ config SYS_I2C_FSL
 
 config SYS_I2C_CADENCE
 	tristate "Cadence I2C Controller"
-	depends on DM_I2C && (ARCH_ZYNQ || ARM64)
+	depends on DM_I2C
 	help
 	  Say yes here to select Cadence I2C Host Controller. This controller is
 	  e.g. used by Xilinx Zynq.
diff --git a/drivers/mailbox/zynqmp-ipi.c b/drivers/mailbox/zynqmp-ipi.c
index f206a27a79..746377e557 100644
--- a/drivers/mailbox/zynqmp-ipi.c
+++ b/drivers/mailbox/zynqmp-ipi.c
@@ -24,10 +24,12 @@
 struct ipi_int_regs {
 	u32 trig; /* 0x0  */
 	u32 obs;  /* 0x4  */
-	u32 ist;  /* 0x8  */
-	u32 imr;  /* 0xC  */
-	u32 ier;  /* 0x10 */
-	u32 idr;  /* 0x14 */
+	u32 dummy0;
+	u32 dummy1;
+	u32 isr;  /* 0x10  */
+	u32 imr;  /* 0x14  */
+	u32 ier;  /* 0x18 */
+	u32 idr;  /* 0x1C */
 };
 
 #define ipi_int_apu ((struct ipi_int_regs *)IPI_INT_REG_BASE_APU)
@@ -66,6 +68,10 @@ static int zynqmp_ipi_recv(struct mbox_chan *chan, void *data)
 	struct zynqmp_ipi *zynqmp = dev_get_priv(chan->dev);
 	u32 *mbx = (u32 *)zynqmp->local_res_regs;
 
+	/*
+	 * PMU Firmware does not trigger IPI interrupt for API call responses so
+	 * there is no need to check ISR flags
+	 */
 	for (size_t i = 0; i < msg->len; i++)
 		msg->buf[i] = readl(&mbx[i]);
 
diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
index 45c34d388c..3651ba4871 100644
--- a/drivers/misc/i2c_eeprom.c
+++ b/drivers/misc/i2c_eeprom.c
@@ -301,19 +301,20 @@ static int i2c_eeprom_partition_probe(struct udevice *dev)
 static int i2c_eeprom_partition_ofdata_to_platdata(struct udevice *dev)
 {
 	struct i2c_eeprom_partition *priv = dev_get_priv(dev);
-	u32 offset, size;
+	u32 reg[2];
 	int ret;
 
-	ret = dev_read_u32(dev, "offset", &offset);
+	ret = dev_read_u32_array(dev, "reg", reg, 2);
 	if (ret)
 		return ret;
 
-	ret = dev_read_u32(dev, "size", &size);
-	if (ret)
-		return ret;
+	if (!reg[1])
+		return -EINVAL;
+
+	priv->offset = reg[0];
+	priv->size = reg[1];
 
-	priv->offset = offset;
-	priv->size = size;
+	debug("%s: base %x, size %x\n", __func__, priv->offset, priv->size);
 
 	return 0;
 }
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 556b3ac489..c29d1ea680 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -653,7 +653,6 @@ config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
 
 config MMC_SDHCI_ZYNQ
 	bool "Arasan SDHCI controller support"
-	depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
 	depends on DM_MMC && OF_CONTROL && BLK
 	depends on MMC_SDHCI
 	help
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index ff871f8252..7673219fb3 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -748,9 +748,9 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 					    "sdhci-caps-mask", 0);
 	dt_caps = dev_read_u64_default(host->mmc->dev,
 				       "sdhci-caps", 0);
-	caps = ~(u32)dt_caps_mask &
+	caps = ~lower_32_bits(dt_caps_mask) &
 	       sdhci_readl(host, SDHCI_CAPABILITIES);
-	caps |= (u32)dt_caps;
+	caps |= lower_32_bits(dt_caps);
 #else
 	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
 #endif
@@ -793,9 +793,9 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 	/* Check whether the clock multiplier is supported or not */
 	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
 #if CONFIG_IS_ENABLED(DM_MMC)
-		caps_1 = ~(u32)(dt_caps_mask >> 32) &
+		caps_1 = ~upper_32_bits(dt_caps_mask) &
 			 sdhci_readl(host, SDHCI_CAPABILITIES_1);
-		caps_1 |= (u32)(dt_caps >> 32);
+		caps_1 |= upper_32_bits(dt_caps);
 #else
 		caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
 #endif
@@ -843,7 +843,10 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 	if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
 		cfg->voltages |= host->voltages;
 
-	cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
+	if (caps & SDHCI_CAN_DO_HISPD)
+		cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
+
+	cfg->host_caps |= MMC_MODE_4BIT;
 
 	/* Since Host Controller Version3.0 */
 	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 43b9f21522..e9381b9493 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -276,7 +276,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 		return PTR_ERR(priv->host->ioaddr);
 
 	priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
-	priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1);
+	priv->bank = dev_read_u32_default(dev, "xlnx,mio-bank", 0);
 
 	return 0;
 }
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ecd779d979..039f9fb058 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -519,7 +519,7 @@ config TULIP
 	  This driver supports DEC DC2114x Fast ethernet chips.
 
 config XILINX_AXIEMAC
-	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+	depends on DM_ETH
 	select PHYLIB
 	select MII
 	bool "Xilinx AXI Ethernet"
@@ -527,7 +527,7 @@ config XILINX_AXIEMAC
 	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 
 config XILINX_EMACLITE
-	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
+	depends on DM_ETH
 	select PHYLIB
 	select MII
 	bool "Xilinx Ethernetlite"
@@ -535,7 +535,7 @@ config XILINX_EMACLITE
 	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 
 config ZYNQ_GEM
-	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
+	depends on DM_ETH
 	select PHYLIB
 	bool "Xilinx Ethernet GEM"
 	help