diff options
author | Anatolij Gustschin <agust@denx.de> | 2010-11-28 04:13:33 +0300 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2010-11-28 21:41:11 +0300 |
commit | 34bbb8fb467a00aebc3e631e71888c5b00875a68 (patch) | |
tree | f91340d23b20439244e0c87420dc0fe6a8fcb082 /drivers | |
parent | b485faa602f4d35af01beaa729525c664e75d7ba (diff) | |
download | u-boot-34bbb8fb467a00aebc3e631e71888c5b00875a68.tar.xz |
cfi_flash: fix bug introduced while recent change to flash_get_size()
commit ec50a8e389863ac35bfd9d9a2e8b30187318e59e
"cfi_flash: handle 'chip size exceeds address window' situation"
added 3rd argument to flash_get_size() but didn't fix all the
function calls from the board specific code. Many boards have
their own flash_get_size() definitions in the board code and
use them there, but some boards (e.g. tqm834x, tqm85xx, pdm360ng)
use flash_get_size() from the cfi_flash.c driver.
The bug shows up if the value of the "max_size" argument (which
is not defined when calling the function with two arguments)
happens to be less than "info->size". In this case on the
affected boards we end up with a bank of reduced size and
in the worst case might even be not able to update U-Boot or
to boot the kernel from flash:
=> fli
Bank # 1: CFI conformant FLASH (32 x 16) Size: 0 kB in 1 Sectors
AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E
Erase timeout: 4096 ms, write timeout: 1 ms
Buffer write timeout: 3 ms, buffer size: 64 bytes
Sector Start Addresses:
F0000000 RO
Bank # 2: CFI conformant FLASH (32 x 16) Size: 128 MB in 512 Sectors
AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E
Erase timeout: 4096 ms, write timeout: 1 ms
Buffer write timeout: 3 ms, buffer size: 64 bytes
Sector Start Addresses:
F8000000 F8040000 F8080000 F80C0000 F8100000
F8140000 F8180000 F81C0000 F8200000 F8240000
...
E.g., updating U-Boot is not possible now:
=> protect off ${u-boot_addr} +${u-boot_size}
Error: end address (0xf007ffff) not in flash!
Bad address format
=> era ${u-boot_addr} +${u-boot_size}
Error: end address (0xf007ffff) not in flash!
Bad address format
This patch removes the 3rd argument of flash_get_size() again
and sets "max_size" in the function itself instead of passing
it as a function argument.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mtd/cfi_flash.c | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index c92c7a7a49..39c235ebc2 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1837,7 +1837,7 @@ static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry) * The following code cannot be run from FLASH! * */ -ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size) +ulong flash_get_size (phys_addr_t base, int banknum) { flash_info_t *info = &flash_info[banknum]; int i, j; @@ -1849,6 +1849,7 @@ ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size) int erase_region_size; int erase_region_count; struct cfi_qry qry; + unsigned long max_size; memset(&qry, 0, sizeof(qry)); @@ -1929,6 +1930,7 @@ ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size) info->size = 1 << qry.dev_size; /* multiply the size by the number of chips */ info->size *= size_ratio; + max_size = cfi_flash_bank_size(banknum); if (max_size && (info->size > max_size)) { debug("[truncated from %ldMiB]", info->size >> 20); info->size = max_size; @@ -2043,8 +2045,7 @@ unsigned long flash_init (void) flash_info[i].flash_id = FLASH_UNKNOWN; if (!flash_detect_legacy(cfi_flash_bank_addr(i), i)) - flash_get_size(cfi_flash_bank_addr(i), i, - cfi_flash_bank_size(i)); + flash_get_size(cfi_flash_bank_addr(i), i); size += flash_info[i].size; if (flash_info[i].flash_id == FLASH_UNKNOWN) { #ifndef CONFIG_SYS_FLASH_QUIET_TEST |