diff options
author | Stefan Roese <sr@denx.de> | 2010-10-25 20:31:48 +0400 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2010-12-17 11:56:05 +0300 |
commit | 6f726f9584eb19e7bcef435eef8b3f8a0838e6e0 (patch) | |
tree | ab5d4680f6bfd619e0b7a00fb188f779fc399c74 /drivers | |
parent | 4d2ca9d6a0452edeaf5922cbae3b939974114214 (diff) | |
download | u-boot-6f726f9584eb19e7bcef435eef8b3f8a0838e6e0.tar.xz |
cfi_flash: Add optional config register write to cfi-detection
This patch adds the possibility to (optinally) write to the
flash configuration register. The Intel style CFI chips support
such a register that can be used to configure the operation
mode to a non-default value.
This method will be used by the t3corp board, which needs to
configure the DS617 Xilinx flash for async read mode.
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mtd/cfi_flash.c | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 7859753807..b0068842f1 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -74,6 +74,20 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT #endif +/* + * 0xffff is an undefined value for the configuration register. When + * this value is returned, the configuration register shall not be + * written at all (default mode). + */ +static u16 cfi_flash_config_reg(int i) +{ +#ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS + return ((u16 [])CONFIG_SYS_CFI_FLASH_CONFIG_REGS)[i]; +#else + return 0xffff; +#endif +} + #if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT) int cfi_flash_num_flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT; #endif @@ -2033,6 +2047,31 @@ void flash_set_verbose(uint v) flash_verbose = v; } +static void cfi_flash_set_config_reg(u32 base, u16 val) +{ +#ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS + /* + * Only set this config register if really defined + * to a valid value (0xffff is invalid) + */ + if (val == 0xffff) + return; + + /* + * Set configuration register. Data is "encrypted" in the 16 lower + * address bits. + */ + flash_write16(FLASH_CMD_SETUP, (void *)(base + (val << 1))); + flash_write16(FLASH_CMD_SET_CR_CONFIRM, (void *)(base + (val << 1))); + + /* + * Finally issue reset-command to bring device back to + * read-array mode + */ + flash_write16(FLASH_CMD_RESET, (void *)base); +#endif +} + /*----------------------------------------------------------------------- */ unsigned long flash_init (void) @@ -2056,6 +2095,10 @@ unsigned long flash_init (void) for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; + /* Optionally write flash configuration register */ + cfi_flash_set_config_reg(cfi_flash_bank_addr(i), + cfi_flash_config_reg(i)); + if (!flash_detect_legacy(cfi_flash_bank_addr(i), i)) flash_get_size(cfi_flash_bank_addr(i), i); size += flash_info[i].size; |