diff options
author | Tony Dinh <mibodhi@gmail.com> | 2023-01-19 06:03:04 +0300 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2023-01-26 09:30:20 +0300 |
commit | 54a08c4139e6677494d62c7cb595d70ef123a86b (patch) | |
tree | 1e5ee0e5183844df43a8d968e61aa2487a9856e2 /drivers | |
parent | 17e8e58fe62c019b2cc26af221b6defc3368229f (diff) | |
download | u-boot-54a08c4139e6677494d62c7cb595d70ef123a86b.tar.xz |
ddr: marvell: a38x: Add support for DDR4 from Marvell mv-ddr-marvell repository
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
up to the commit "mv_ddr: a3700: Use the right size for memset to not overflow"
d5acc10c287e40cc2feeb28710b92e45c93c702c
This patch was created by following steps:
1. Replace all a38x files in U-Boot tree by files from upstream github
Marvell mv-ddr-marvell repository.
2. Run following command to omit portions not relevant for a38x, ddr3, and ddr4:
files=drivers/ddr/marvell/a38x/*
unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_APN806 \
-UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \
-UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \
-UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DCONFIG_ARMADA_38X -UCONFIG_ARMADA_39X \
-UCONFIG_64BIT $files
3. Manually change license to SPDX-License-Identifier
(upstream license in upstream github repository contains long license
texts and U-Boot is using just SPDX-License-Identifier.
After applying this patch, a38x, ddr3, and ddr4 code in upstream Marvell github
repository and in U-Boot would be fully identical. So in future applying
above steps could be used to sync code again.
The only change in this patch are:
1. Some fixes with include files.
2. Some function return and basic type defines changes in
mv_ddr_plat.c (to correct Marvell bug).
3. Remove of dead code in newly copied files (as a result of the
filter script stripping out everything other than a38x, dd3, and ddr4).
Reference:
"ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository"
https://source.denx.de/u-boot/u-boot/-/commit/107c3391b95bcc2ba09a876da4fa0c31b6c1e460
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers')
27 files changed, 5991 insertions, 0 deletions
diff --git a/drivers/ddr/marvell/a38x/Makefile b/drivers/ddr/marvell/a38x/Makefile index 8251d6db66..fcfb615686 100644 --- a/drivers/ddr/marvell/a38x/Makefile +++ b/drivers/ddr/marvell/a38x/Makefile @@ -17,3 +17,11 @@ obj-$(CONFIG_SPL_BUILD) += mv_ddr_common.o obj-$(CONFIG_SPL_BUILD) += mv_ddr_spd.o obj-$(CONFIG_SPL_BUILD) += mv_ddr_topology.o obj-$(CONFIG_SPL_BUILD) += xor.o + +ifdef CONFIG_DDR4 + obj-$(CONFIG_SPL_BUILD) += mv_ddr4_mpr_pda_if.o + obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training.o + obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_calibration.o + obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_db.o + obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_leveling.o +endif diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c index f5fc964d6f..9e499cfb99 100644 --- a/drivers/ddr/marvell/a38x/ddr3_debug.c +++ b/drivers/ddr/marvell/a38x/ddr3_debug.c @@ -30,6 +30,12 @@ u8 debug_training_hw_alg = DEBUG_LEVEL_ERROR; u8 debug_training_access = DEBUG_LEVEL_ERROR; u8 debug_training_device = DEBUG_LEVEL_ERROR; +#if defined(CONFIG_DDR4) +u8 debug_tap_tuning = DEBUG_LEVEL_ERROR; +u8 debug_calibration = DEBUG_LEVEL_ERROR; +u8 debug_ddr4_centralization = DEBUG_LEVEL_ERROR; +u8 debug_dm_tuning = DEBUG_LEVEL_ERROR; +#endif /* CONFIG_DDR4 */ void mv_ddr_user_log_level_set(enum ddr_lib_debug_block block) { @@ -70,6 +76,17 @@ void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level) else is_reg_dump = 0; break; +#if defined(CONFIG_DDR4) + case DEBUG_TAP_TUNING_ENGINE: + debug_tap_tuning = level; + break; + case DEBUG_BLOCK_CALIBRATION: + debug_calibration = level; + break; + case DEBUG_BLOCK_DDR4_CENTRALIZATION: + debug_ddr4_centralization = level; + break; +#endif /* CONFIG_DDR4 */ case DEBUG_BLOCK_ALL: default: debug_training_static = level; @@ -80,6 +97,11 @@ void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level) debug_training_hw_alg = level; debug_training_access = level; debug_training_device = level; +#if defined(CONFIG_DDR4) + debug_tap_tuning = level; + debug_calibration = level; + debug_ddr4_centralization = level; +#endif /* CONFIG_DDR4 */ } } #endif /* SILENT_LIB */ @@ -209,11 +231,13 @@ static char *convert_freq(enum mv_ddr_freq freq) case MV_DDR_FREQ_LOW_FREQ: return "MV_DDR_FREQ_LOW_FREQ"; +#if !defined(CONFIG_DDR4) case MV_DDR_FREQ_400: return "400"; case MV_DDR_FREQ_533: return "533"; +#endif /* CONFIG_DDR4 */ case MV_DDR_FREQ_667: return "667"; @@ -227,6 +251,7 @@ static char *convert_freq(enum mv_ddr_freq freq) case MV_DDR_FREQ_1066: return "1066"; +#if !defined(CONFIG_DDR4) case MV_DDR_FREQ_311: return "311"; @@ -247,6 +272,7 @@ static char *convert_freq(enum mv_ddr_freq freq) case MV_DDR_FREQ_1000: return "MV_DDR_FREQ_1000"; +#endif /* CONFIG_DDR4 */ default: return "Unknown Frequency"; @@ -463,6 +489,7 @@ int ddr3_tip_print_log(u32 dev_num, u32 mem_addr) (training_result[WRITE_LEVELING_TF] [if_id]))); } +#if !defined(CONFIG_DDR4) if (mask_tune_func & READ_LEVELING_TF_MASK_BIT) { DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("\tRL TF: %s\n", @@ -470,6 +497,7 @@ int ddr3_tip_print_log(u32 dev_num, u32 mem_addr) (training_result[READ_LEVELING_TF] [if_id]))); } +#endif /* CONFIG_DDR4 */ if (mask_tune_func & WRITE_LEVELING_SUPP_TF_MASK_BIT) { DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("\tWL TF Supp: %s\n", @@ -499,6 +527,43 @@ int ddr3_tip_print_log(u32 dev_num, u32 mem_addr) (training_result[CENTRALIZATION_TX] [if_id]))); } +#if defined(CONFIG_DDR4) + if (mask_tune_func & SW_READ_LEVELING_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tSW RL TF: %s\n", + ddr3_tip_convert_tune_result + (training_result[SW_READ_LEVELING] + [if_id]))); + } + if (mask_tune_func & RECEIVER_CALIBRATION_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tRX CAL: %s\n", + ddr3_tip_convert_tune_result + (training_result[RECEIVER_CALIBRATION] + [if_id]))); + } + if (mask_tune_func & WL_PHASE_CORRECTION_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tWL PHASE CORRECT: %s\n", + ddr3_tip_convert_tune_result + (training_result[WL_PHASE_CORRECTION] + [if_id]))); + } + if (mask_tune_func & DQ_VREF_CALIBRATION_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tDQ VREF CAL: %s\n", + ddr3_tip_convert_tune_result + (training_result[DQ_VREF_CALIBRATION] + [if_id]))); + } + if (mask_tune_func & DQ_MAPPING_MASK_BIT) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("\tDQ MAP: %s\n", + ddr3_tip_convert_tune_result + (training_result[DQ_MAPPING] + [if_id]))); + } +#endif /* CONFIG_DDR4 */ } return MV_OK; @@ -512,6 +577,9 @@ int ddr3_tip_print_stability_log(u32 dev_num) { u8 if_id = 0, csindex = 0, bus_id = 0, idx = 0; u32 reg_data; +#if defined(CONFIG_DDR4) + u32 reg_data1; +#endif /* CONFIG_DDR4 */ u32 read_data[MAX_INTERFACE_NUM]; unsigned int max_cs = mv_ddr_cs_num_get(); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); @@ -524,7 +592,13 @@ int ddr3_tip_print_stability_log(u32 dev_num) printf("CS%d , ", csindex); printf("\n"); VALIDATE_BUS_ACTIVE(tm->bus_act_mask, bus_id); +#if defined(CONFIG_DDR4) + printf("DminTx, AreaTx, DminRx, AreaRx, WL_tot, WL_ADLL, WL_PH, RL_Tot, RL_ADLL, RL_PH, RL_Smp, CenTx, CenRx, Vref, DQVref,"); + for (idx = 0; idx < 11; idx++) + printf("DC-Pad%d,", idx); +#else /* CONFIG_DDR4 */ printf("VWTx, VWRx, WL_tot, WL_ADLL, WL_PH, RL_Tot, RL_ADLL, RL_PH, RL_Smp, Cen_tx, Cen_rx, Vref, DQVref,"); +#endif /* CONFIG_DDR4 */ printf("\t\t"); for (idx = 0; idx < 11; idx++) printf("PBSTx-Pad%d,", idx); @@ -565,6 +639,40 @@ int ddr3_tip_print_stability_log(u32 dev_num) for (bus_id = 0; bus_id < MAX_BUS_NUM; bus_id++) { printf("\n"); VALIDATE_BUS_ACTIVE(tm->bus_act_mask, bus_id); +#if defined(CONFIG_DDR4) + /* DminTx, areaTX */ + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + RESULT_PHY_REG + + csindex, ®_data); + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + dmin_phy_reg_table + [csindex * 5 + bus_id][0], + DDR_PHY_CONTROL, + dmin_phy_reg_table + [csindex * 5 + bus_id][1], + ®_data1); + printf("%d,%d,", 2 * (reg_data1 & 0xFF), + reg_data); + /* DminRx, areaRX */ + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + RESULT_PHY_REG + + csindex + 4, ®_data); + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + dmin_phy_reg_table + [csindex * 5 + bus_id][0], + DDR_PHY_CONTROL, + dmin_phy_reg_table + [csindex * 5 + bus_id][1], + ®_data1); + printf("%d,%d,", 2 * (reg_data1 >> 8), + reg_data); +#else /* CONFIG_DDR4 */ ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, bus_id, DDR_PHY_DATA, @@ -572,6 +680,7 @@ int ddr3_tip_print_stability_log(u32 dev_num) csindex, ®_data); printf("%d,%d,", (reg_data & 0x1f), ((reg_data & 0x3e0) >> 5)); +#endif /* CONFIG_DDR4 */ /* WL */ ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, @@ -628,6 +737,17 @@ int ddr3_tip_print_stability_log(u32 dev_num) /* DQVref */ /* Need to add the Read Function from device */ printf("%d,", 0); +#if defined(CONFIG_DDR4) + printf("\t\t"); + for (idx = 0; idx < 11; idx++) { + ddr3_tip_bus_read(dev_num, if_id, + ACCESS_TYPE_UNICAST, + bus_id, DDR_PHY_DATA, + 0xd0 + 12 * csindex + + idx, ®_data); + printf("%d,", (reg_data & 0x3f)); + } +#endif /* CONFIG_DDR4 */ printf("\t\t"); for (idx = 0; idx < 11; idx++) { ddr3_tip_bus_read(dev_num, if_id, diff --git a/drivers/ddr/marvell/a38x/ddr3_init.c b/drivers/ddr/marvell/a38x/ddr3_init.c index f878b4512b..27eb3ac173 100644 --- a/drivers/ddr/marvell/a38x/ddr3_init.c +++ b/drivers/ddr/marvell/a38x/ddr3_init.c @@ -6,7 +6,11 @@ #include "ddr3_init.h" #include "mv_ddr_common.h" +#if defined(CONFIG_DDR4) +static char *ddr_type = "DDR4"; +#else /* CONFIG_DDR4 */ static char *ddr_type = "DDR3"; +#endif /* CONFIG_DDR4 */ /* * generic_init_controller controls D-unit configuration: @@ -61,6 +65,13 @@ int ddr3_init(void) mv_ddr_mc_init(); if (!is_manual_cal_done) { +#if defined(CONFIG_DDR4) + status = mv_ddr4_calibration_adjust(0, 1, 0); + if (status != MV_OK) { + printf("%s: failed (0x%x)\n", __func__, status); + return status; + } +#endif } @@ -120,6 +131,19 @@ static int mv_ddr_training_params_set(u8 dev_num) params.g_zpodt_ctrl = TUNE_TRAINING_PARAMS_P_ODT_CTRL; params.g_znodt_ctrl = TUNE_TRAINING_PARAMS_N_ODT_CTRL; +#if defined(CONFIG_DDR4) + params.g_zpodt_data = TUNE_TRAINING_PARAMS_P_ODT_DATA_DDR4; + params.g_odt_config = TUNE_TRAINING_PARAMS_ODT_CONFIG_DDR4; + params.g_rtt_nom = TUNE_TRAINING_PARAMS_RTT_NOM_DDR4; + params.g_dic = TUNE_TRAINING_PARAMS_DIC_DDR4; + if (cs_num == 1) { + params.g_rtt_wr = TUNE_TRAINING_PARAMS_RTT_WR_1CS; + params.g_rtt_park = TUNE_TRAINING_PARAMS_RTT_PARK_1CS; + } else { + params.g_rtt_wr = TUNE_TRAINING_PARAMS_RTT_WR_2CS; + params.g_rtt_park = TUNE_TRAINING_PARAMS_RTT_PARK_2CS; + } +#else /* CONFIG_DDR4 */ params.g_zpodt_data = TUNE_TRAINING_PARAMS_P_ODT_DATA; params.g_dic = TUNE_TRAINING_PARAMS_DIC; params.g_rtt_nom = TUNE_TRAINING_PARAMS_RTT_NOM; @@ -130,6 +154,7 @@ static int mv_ddr_training_params_set(u8 dev_num) params.g_rtt_wr = TUNE_TRAINING_PARAMS_RTT_WR_2CS; params.g_odt_config = TUNE_TRAINING_PARAMS_ODT_CONFIG_2CS; } +#endif /* CONFIG_DDR4 */ if (ck_delay > 0) params.ck_delay = ck_delay; diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h index 055516b67e..ba9f7881d5 100644 --- a/drivers/ddr/marvell/a38x/ddr3_init.h +++ b/drivers/ddr/marvell/a38x/ddr3_init.h @@ -137,6 +137,10 @@ extern u32 dfs_low_freq; extern u32 nominal_avs; extern u32 extension_avs; +#if defined(CONFIG_DDR4) +/* if 1, SSTL & POD have same Vref and workaround is required */ +extern u8 vref_calibration_wa; +#endif /* CONFIG_DDR4 */ /* Prototypes */ int ddr3_init(void); @@ -152,6 +156,13 @@ void ddr3_new_tip_ecc_scrub(void); int ddr3_tip_reg_write(u32 dev_num, u32 reg_addr, u32 data); int ddr3_tip_reg_read(u32 dev_num, u32 reg_addr, u32 *data, u32 reg_mask); int ddr3_silicon_get_ddr_target_freq(u32 *ddr_freq); +#if defined(CONFIG_DDR4) +int mv_ddr4_mode_regs_init(u8 dev_num); +int mv_ddr4_sdram_config(u32 dev_num); +int mv_ddr4_phy_config(u32 dev_num); +int mv_ddr4_calibration_adjust(u32 dev_num, u8 vref_en, u8 pod_only); +int mv_ddr4_training_main_flow(u32 dev_num); +#endif /* CONFIG_DDR4 */ int print_adll(u32 dev_num, u32 adll[MAX_INTERFACE_NUM * MAX_BUS_NUM]); int print_ph(u32 dev_num, u32 adll[MAX_INTERFACE_NUM * MAX_BUS_NUM]); @@ -188,5 +199,8 @@ unsigned int mv_ddr_misl_phy_drv_ctrl_p_get(void); unsigned int mv_ddr_misl_phy_drv_ctrl_n_get(void); unsigned int mv_ddr_misl_phy_odt_p_get(void); unsigned int mv_ddr_misl_phy_odt_n_get(void); +#if defined(CONFIG_DDR4) +void refresh(void); +#endif #endif /* _DDR3_INIT_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_logging_def.h b/drivers/ddr/marvell/a38x/ddr3_logging_def.h index ad9da1cfff..a809213926 100644 --- a/drivers/ddr/marvell/a38x/ddr3_logging_def.h +++ b/drivers/ddr/marvell/a38x/ddr3_logging_def.h @@ -73,6 +73,27 @@ #endif #endif +#ifdef CONFIG_DDR4 +#ifdef SILENT_LIB +#define DEBUG_TAP_TUNING_ENGINE(level, s) +#define DEBUG_CALIBRATION(level, s) +#define DEBUG_DDR4_CENTRALIZATION(level, s) +#define DEBUG_DM_TUNING(level, s) +#else /* SILENT_LIB */ +#define DEBUG_TAP_TUNING_ENGINE(level, s) \ + if (level >= debug_tap_tuning) \ + printf s +#define DEBUG_CALIBRATION(level, s) \ + if (level >= debug_calibration) \ + printf s +#define DEBUG_DDR4_CENTRALIZATION(level, s) \ + if (level >= debug_ddr4_centralization) \ + printf s +#define DEBUG_DM_TUNING(level, s) \ + if (level >= debug_dm_tuning) \ + printf s +#endif /* SILENT_LIB */ +#endif /* CONFIG_DDR4 */ /* Logging defines */ enum mv_ddr_debug_level { @@ -94,6 +115,12 @@ enum ddr_lib_debug_block { DEBUG_BLOCK_DEVICE, DEBUG_BLOCK_ACCESS, DEBUG_STAGES_REG_DUMP, +#if defined(CONFIG_DDR4) + DEBUG_TAP_TUNING_ENGINE, + DEBUG_BLOCK_CALIBRATION, + DEBUG_BLOCK_DDR4_CENTRALIZATION, + DEBUG_DM_TUNING, +#endif /* CONFIG_DDR4 */ /* All excluding IP and REG_DUMP, should be enabled separatelly */ DEBUG_BLOCK_ALL }; diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c index 0ddd5aea75..790b01d031 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training.c +++ b/drivers/ddr/marvell/a38x/ddr3_training.c @@ -25,7 +25,11 @@ u32 *dq_map_table = NULL; /* in case of ddr4 do not run ddr3_tip_write_additional_odt_setting function - mc odt always 'on' * in ddr4 case the terminations are rttWR and rttPARK and the odt must be always 'on' 0x1498 = 0xf */ +#if defined(CONFIG_DDR4) +u32 odt_config = 0; +#else u32 odt_config = 1; +#endif u32 nominal_avs; u32 extension_avs; @@ -85,7 +89,11 @@ u32 mask_tune_func = (SET_MEDIUM_FREQ_MASK_BIT | READ_LEVELING_MASK_BIT | SET_TARGET_FREQ_MASK_BIT | WRITE_LEVELING_TF_MASK_BIT | +#if defined(CONFIG_DDR4) + SW_READ_LEVELING_MASK_BIT | +#else /* CONFIG_DDR4 */ READ_LEVELING_TF_MASK_BIT | +#endif /* CONFIG_DDR4 */ CENTRALIZATION_RX_MASK_BIT | CENTRALIZATION_TX_MASK_BIT); @@ -102,6 +110,10 @@ int adll_calibration(u32 dev_num, enum hws_access_type access_type, u32 if_id, enum mv_ddr_freq frequency); static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, u32 if_id, enum mv_ddr_freq frequency); +#if defined(CONFIG_DDR4) +static int ddr4_tip_set_timing(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum mv_ddr_freq frequency); +#endif /* CONFIG_DDR4 */ static u8 mem_size_config[MV_DDR_DIE_CAP_LAST] = { 0x2, /* 512Mbit */ @@ -173,12 +185,24 @@ static struct reg_data odpg_default_value[] = { }; /* MR cmd and addr definitions */ +#if defined(CONFIG_DDR4) +struct mv_ddr_mr_data mr_data[] = { + {MRS0_CMD, DDR4_MR0_REG}, + {MRS1_CMD, DDR4_MR1_REG}, + {MRS2_CMD, DDR4_MR2_REG}, + {MRS3_CMD, DDR4_MR3_REG}, + {MRS4_CMD, DDR4_MR4_REG}, + {MRS5_CMD, DDR4_MR5_REG}, + {MRS6_CMD, DDR4_MR6_REG} +}; +#else struct mv_ddr_mr_data mr_data[] = { {MRS0_CMD, MR0_REG}, {MRS1_CMD, MR1_REG}, {MRS2_CMD, MR2_REG}, {MRS3_CMD, MR3_REG} }; +#endif /* inverse pads */ static int ddr3_tip_pad_inv(void) @@ -664,6 +688,11 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ calibration_update_control << 3, 0x3 << 3)); } +#if defined(CONFIG_DDR4) + /* dev_num, vref_en, pod_only */ + CHECK_STATUS(mv_ddr4_mode_regs_init(dev_num)); + CHECK_STATUS(mv_ddr4_sdram_config(dev_num)); +#endif /* CONFIG_DDR4 */ if (delay_enable != 0) { adll_tap = MEGA / (mv_ddr_freq_get(freq) * 64); @@ -1325,6 +1354,20 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, /* disable ODT in case of dll off */ if (is_dll_off == 1) { +#if defined(CONFIG_DDR4) + CHECK_STATUS(ddr3_tip_if_read + (dev_num, access_type, PARAM_NOT_CARE, + 0x1974, &g_rtt_nom_cs0, MASK_ALL_BITS)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + 0x1974, 0, (0x7 << 8))); + CHECK_STATUS(ddr3_tip_if_read + (dev_num, access_type, PARAM_NOT_CARE, + 0x1A74, &g_rtt_nom_cs1, MASK_ALL_BITS)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + 0x1A74, 0, (0x7 << 8))); +#else /* CONFIG_DDR4 */ CHECK_STATUS(ddr3_tip_if_write (dev_num, access_type, if_id, 0x1874, 0, 0x244)); @@ -1337,6 +1380,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, CHECK_STATUS(ddr3_tip_if_write (dev_num, access_type, if_id, 0x18a4, 0, 0x244)); +#endif /* CONFIG_DDR4 */ } /* DFS - Enter Self-Refresh */ @@ -1404,6 +1448,16 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, /* Restore original RTT values if returning from DLL OFF mode */ if (is_dll_off == 1) { +#if defined(CONFIG_DDR4) + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + 0x1974, g_rtt_nom_cs0, (0x7 << 8))); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + 0x1A74, g_rtt_nom_cs1, (0x7 << 8))); + + mv_ddr4_mode_regs_init(dev_num); +#else /* CONFIG_DDR4 */ CHECK_STATUS(ddr3_tip_if_write (dev_num, access_type, if_id, 0x1874, g_dic | g_rtt_nom, 0x266)); @@ -1416,6 +1470,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, CHECK_STATUS(ddr3_tip_if_write (dev_num, access_type, if_id, 0x18a4, g_dic | g_rtt_nom, 0x266)); +#endif /* CONFIG_DDR4 */ } /* Reset divider_b assert -> de-assert */ @@ -1669,8 +1724,13 @@ static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, t_rtp = GET_MAX_VALUE(t_ckclk * 4, mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRTP)); t_mod = GET_MAX_VALUE(t_ckclk * 12, 15000); +#if defined(CONFIG_DDR4) + t_wtr = GET_MAX_VALUE(t_ckclk * 2, mv_ddr_speed_bin_timing_get(speed_bin_index, + SPEED_BIN_TWTR)); +#else /* CONFIG_DDR4 */ t_wtr = GET_MAX_VALUE(t_ckclk * 4, mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TWTR)); +#endif /* CONFIG_DDR4 */ t_ras = time_to_nclk(mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRAS), t_ckclk); @@ -1758,10 +1818,70 @@ static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, DDR_TIMING_TPD_MASK << DDR_TIMING_TPD_OFFS | DDR_TIMING_TXPDLL_MASK << DDR_TIMING_TXPDLL_OFFS)); +#if defined(CONFIG_DDR4) + ddr4_tip_set_timing(dev_num, access_type, if_id, frequency); +#endif /* CONFIG_DDR4 */ return MV_OK; } +#if defined(CONFIG_DDR4) +static int ddr4_tip_set_timing(u32 dev_num, enum hws_access_type access_type, + u32 if_id, enum mv_ddr_freq frequency) +{ + u32 t_rrd_l = 0, t_wtr_l = 0, t_ckclk = 0, t_mod = 0, t_ccd = 0; + u32 page_size = 0, val = 0, mask = 0; + enum mv_ddr_speed_bin speed_bin_index; + enum mv_ddr_die_capacity memory_size; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + u32 freq = mv_ddr_freq_get(frequency); + + speed_bin_index = tm->interface_params[if_id].speed_bin_index; + memory_size = tm->interface_params[if_id].memory_size; + page_size = mv_ddr_page_size_get(tm->interface_params[if_id].bus_width, memory_size); + + t_ckclk = (MEGA / freq); + + t_rrd_l = (page_size == 1) ? mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRRDL1K) : + mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRRDL2K); + t_rrd_l = GET_MAX_VALUE(t_ckclk * 4, t_rrd_l); + + t_wtr_l = mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TWTRL); + t_wtr_l = GET_MAX_VALUE(t_ckclk * 4, t_wtr_l); + + t_rrd_l = time_to_nclk(t_rrd_l, t_ckclk); + t_wtr_l = time_to_nclk(t_wtr_l, t_ckclk); + + val = (((t_rrd_l - 1) & DDR4_TRRD_L_MASK) << DDR4_TRRD_L_OFFS) | + (((t_wtr_l - 1) & DDR4_TWTR_L_MASK) << DDR4_TWTR_L_OFFS); + mask = (DDR4_TRRD_L_MASK << DDR4_TRRD_L_OFFS) | + (DDR4_TWTR_L_MASK << DDR4_TWTR_L_OFFS); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + DRAM_LONG_TIMING_REG, val, mask)); + + val = 0; + mask = 0; + t_mod = mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TMOD); + t_mod = GET_MAX_VALUE(t_ckclk * 24, t_mod); + t_mod = time_to_nclk(t_mod, t_ckclk); + + val = (((t_mod - 1) & SDRAM_TIMING_HIGH_TMOD_MASK) << SDRAM_TIMING_HIGH_TMOD_OFFS) | + ((((t_mod - 1) >> 4) & SDRAM_TIMING_HIGH_TMOD_HIGH_MASK) << SDRAM_TIMING_HIGH_TMOD_HIGH_OFFS); + mask = (SDRAM_TIMING_HIGH_TMOD_MASK << SDRAM_TIMING_HIGH_TMOD_OFFS) | + (SDRAM_TIMING_HIGH_TMOD_HIGH_MASK << SDRAM_TIMING_HIGH_TMOD_HIGH_OFFS); + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + SDRAM_TIMING_HIGH_REG, val, mask)); + + t_ccd = 6; + + CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, + DDR_TIMING_REG, + ((t_ccd - 1) & DDR_TIMING_TCCD_MASK) << DDR_TIMING_TCCD_OFFS, + DDR_TIMING_TCCD_MASK << DDR_TIMING_TCCD_OFFS)); + + return MV_OK; +} +#endif /* CONFIG_DDR4 */ /* * Write CS Result @@ -2245,6 +2365,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) } } +#if !defined(CONFIG_DDR4) for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { if (mask_tune_func & PBS_RX_MASK_BIT) { training_stage = PBS_RX; @@ -2284,6 +2405,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) } /* Set to 0 after each loop to avoid illegal value may be used */ effective_cs = 0; +#endif /* CONFIG_DDR4 */ if (mask_tune_func & SET_TARGET_FREQ_MASK_BIT) { training_stage = SET_TARGET_FREQ; @@ -2367,6 +2489,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) } } +#if !defined(CONFIG_DDR4) if (mask_tune_func & DM_PBS_TX_MASK_BIT) { DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("DM_PBS_TX_MASK_BIT\n")); } @@ -2412,6 +2535,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) } /* Set to 0 after each loop to avoid illegal value may be used */ effective_cs = 0; +#endif /* CONFIG_DDR4 */ for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { if (mask_tune_func & WRITE_LEVELING_SUPP_TF_MASK_BIT) { @@ -2434,7 +2558,12 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) /* Set to 0 after each loop to avoid illegal value may be used */ effective_cs = 0; +#if defined(CONFIG_DDR4) + for (effective_cs = 0; effective_cs < max_cs; effective_cs++) + CHECK_STATUS(mv_ddr4_training_main_flow(dev_num)); +#endif /* CONFIG_DDR4 */ +#if !defined(CONFIG_DDR4) for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { if (mask_tune_func & CENTRALIZATION_TX_MASK_BIT) { training_stage = CENTRALIZATION_TX; @@ -2455,6 +2584,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) } /* Set to 0 after each loop to avoid illegal value may be used */ effective_cs = 0; +#endif /* CONFIG_DDR4 */ DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("restore registers to default\n")); /* restore register values */ @@ -2895,3 +3025,4 @@ unsigned int mv_ddr_misl_phy_odt_n_get(void) return odt_n; } + diff --git a/drivers/ddr/marvell/a38x/ddr3_training_bist.c b/drivers/ddr/marvell/a38x/ddr3_training_bist.c index d388a17291..3f072eb037 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_bist.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_bist.c @@ -459,7 +459,11 @@ static int mv_ddr_odpg_bist_prepare(enum hws_pattern pattern, enum hws_access_ty (ODPG_WRBUF_RD_CTRL_DIS << ODPG_WRBUF_RD_CTRL_OFFS), (ODPG_WRBUF_RD_CTRL_MASK << ODPG_WRBUF_RD_CTRL_OFFS)); +#if defined(CONFIG_DDR4) + if (pattern == PATTERN_ZERO || pattern == PATTERN_ONE) +#else if (pattern == PATTERN_00 || pattern == PATTERN_FF) +#endif ddr3_tip_load_pattern_to_odpg(0, access_type, 0, pattern, offset); else mv_ddr_load_dm_pattern_to_odpg(access_type, pattern, dm_dir); @@ -507,7 +511,11 @@ int mv_ddr_dm_vw_get(enum hws_pattern pattern, u32 cs, u8 *vw_vector) ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, ODPG_DATA_CTRL_REG, 0, MASK_ALL_BITS); mv_ddr_odpg_bist_prepare(pattern, ACCESS_TYPE_UNICAST, OPER_WRITE, STRESS_NONE, DURATION_SINGLE, bist_offset, cs, pattern_table[pattern].num_of_phases_tx, +#if defined(CONFIG_DDR4) + (pattern == PATTERN_ZERO) ? DM_DIR_DIRECT : DM_DIR_INVERSE); +#else (pattern == PATTERN_00) ? DM_DIR_DIRECT : DM_DIR_INVERSE); +#endif for (adll_tap = 0; adll_tap < ADLL_TAPS_PER_PERIOD; adll_tap++) { /* change target odpg address */ @@ -539,7 +547,11 @@ int mv_ddr_dm_vw_get(enum hws_pattern pattern, u32 cs, u8 *vw_vector) /* fill memory with vref pattern to increment addr using odpg bist */ mv_ddr_odpg_bist_prepare(PATTERN_VREF, ACCESS_TYPE_UNICAST, OPER_WRITE, STRESS_NONE, DURATION_SINGLE, bist_offset, cs, pattern_table[pattern].num_of_phases_tx, +#if defined(CONFIG_DDR4) + (pattern == PATTERN_ZERO) ? DM_DIR_DIRECT : DM_DIR_INVERSE); +#else (pattern == PATTERN_00) ? DM_DIR_DIRECT : DM_DIR_INVERSE); +#endif for (adll_tap = 0; adll_tap < ADLL_TAPS_PER_PERIOD; adll_tap++) { ddr3_tip_bus_write(0, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_MULTICAST, 0, diff --git a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c index be9f985f22..e75e45c169 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c @@ -16,7 +16,11 @@ #define CENTRAL_RX 1 #define NUM_OF_CENTRAL_TYPES 2 +#if defined(CONFIG_DDR4) /* DDR4 16/32-bit */ +u32 start_pattern = PATTERN_KILLER_DQ0, end_pattern = PATTERN_KILLER_DQ7_INV; +#else /* DDR3 16/32-bit */ u32 start_pattern = PATTERN_KILLER_DQ0, end_pattern = PATTERN_KILLER_DQ7; +#endif /* CONFIG_64BIT */ u32 start_if = 0, end_if = (MAX_INTERFACE_NUM - 1); u8 bus_end_window[NUM_OF_CENTRAL_TYPES][MAX_INTERFACE_NUM][MAX_BUS_NUM]; diff --git a/drivers/ddr/marvell/a38x/ddr3_training_db.c b/drivers/ddr/marvell/a38x/ddr3_training_db.c index 6aa7b6069e..47ba911e0d 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_db.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_db.c @@ -25,6 +25,98 @@ static inline u32 pattern_table_get_sso_xtalk_free_word16(u8 bit, u8 index); static inline u32 pattern_table_get_isi_word(u8 index); static inline u32 pattern_table_get_isi_word16(u8 index); +#if defined(CONFIG_DDR4) +u8 pattern_killer_map[KILLER_PATTERN_LENGTH * 2] = { + 0x01, + 0x00, + 0x01, + 0xff, + 0xfe, + 0xfe, + 0x01, + 0xfe, + 0x01, + 0xfe, + 0x01, + 0x01, + 0xfe, + 0x01, + 0xfe, + 0x00, + 0xff, + 0x00, + 0xff, + 0x00, + 0xff, + 0x00, + 0xff, + 0x01, + 0x00, + 0xff, + 0x00, + 0xff, + 0x00, + 0x00, + 0x00, + 0xfe, + 0xfe, + 0xff, + 0x00, + 0x00, + 0xff, + 0xff, + 0x00, + 0xff, + 0x00, + 0xff, + 0xff, + 0x00, + 0x00, + 0xff, + 0x00, + 0xff, + 0xfe, + 0x00, + 0xfe, + 0xfe, + 0x00, + 0xff, + 0xff, + 0x01, + 0x01, + 0xff, + 0xff, + 0x00, + 0x00, + 0x00, + 0x00, + 0xff +}; +static inline u32 pattern_table_get_killer_word_4(u8 dqs, u8 index) +{ + u8 byte; + + if (index >= (KILLER_PATTERN_LENGTH * 2)) { + printf("error: %s: invalid index [%u] found\n", __func__, index); + return 0; + } + + byte = pattern_killer_map[index]; + + switch (byte) { + case 0x01: + byte = 1 << dqs; + break; + case 0xfe: + byte = 0xff & ~(1 << dqs); + break; + default: + break; + } + + return byte | (byte << 8) | (byte << 16) | (byte << 24); +} +#else /* !CONFIG_DDR4 */ /* List of allowed frequency listed in order of enum mv_ddr_freq */ static unsigned int freq_val[MV_DDR_FREQ_LAST] = { 0, /*MV_DDR_FREQ_LOW_FREQ */ @@ -302,6 +394,7 @@ u32 speed_bin_table_t_rcd_t_rp[] = { 12155, 13090, }; +#endif /* CONFIG_DDR4 */ enum { PATTERN_KILLER_PATTERN_TABLE_MAP_ROLE_AGGRESSOR = 0, @@ -388,6 +481,7 @@ static u8 pattern_vref_pattern_table_map[] = { 0xfe }; +#if !defined(CONFIG_DDR4) static struct mv_ddr_page_element page_tbl[] = { /* 8-bit, 16-bit page size */ {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 512M */ @@ -521,6 +615,7 @@ static inline u32 pattern_table_get_killer_word(u8 dqs, u8 index) return byte | (byte << 8) | (byte << 16) | (byte << 24); } +#endif /* !CONFIG_DDR4 */ static inline u32 pattern_table_get_killer_word16(u8 dqs, u8 index) { @@ -651,6 +746,7 @@ static inline u32 pattern_table_get_vref_word16(u8 index) return 0xffffffff; } +#if !defined(CONFIG_DDR4) static inline u32 pattern_table_get_static_pbs_word(u8 index) { u16 temp; @@ -659,6 +755,7 @@ static inline u32 pattern_table_get_static_pbs_word(u8 index) return temp | (temp << 8) | (temp << 16) | (temp << 24); } +#endif /* !CONFIG_DDR4 */ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) { @@ -670,26 +767,36 @@ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) switch (type) { case PATTERN_PBS1: case PATTERN_PBS2: +#if !defined(CONFIG_DDR4) if (index == 0 || index == 2 || index == 5 || index == 7) pattern = PATTERN_55; else pattern = PATTERN_AA; break; +#endif /* !CONFIG_DDR4 */ case PATTERN_PBS3: +#if !defined(CONFIG_DDR4) if (0 == (index & 1)) pattern = PATTERN_55; else pattern = PATTERN_AA; +#endif /* !CONFIG_DDR4 */ break; case PATTERN_RL: +#if !defined(CONFIG_DDR4) if (index < 6) pattern = PATTERN_00; else pattern = PATTERN_80; +#else /* CONFIG_DDR4 */ + pattern = PATTERN_00; +#endif /* !CONFIG_DDR4 */ break; case PATTERN_STATIC_PBS: +#if !defined(CONFIG_DDR4) pattern = pattern_table_get_static_pbs_word(index); +#endif /* !CONFIG_DDR4 */ break; case PATTERN_KILLER_DQ0: case PATTERN_KILLER_DQ1: @@ -699,14 +806,22 @@ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) case PATTERN_KILLER_DQ5: case PATTERN_KILLER_DQ6: case PATTERN_KILLER_DQ7: +#if !defined(CONFIG_DDR4) pattern = pattern_table_get_killer_word( +#else /* CONFIG_DDR4 */ + pattern = pattern_table_get_killer_word_4( +#endif /* !CONFIG_DDR4 */ (u8)(type - PATTERN_KILLER_DQ0), index); break; case PATTERN_RL2: +#if !defined(CONFIG_DDR4) if (index < 6) pattern = PATTERN_00; else pattern = PATTERN_01; +#else /* !CONFIG_DDR4 */ + pattern = PATTERN_FF; +#endif /* CONFIG_DDR4 */ break; case PATTERN_TEST: if (index > 1 && index < 6) @@ -749,6 +864,46 @@ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) case PATTERN_ISI_XTALK_FREE: pattern = pattern_table_get_isi_word(index); break; +#if defined(CONFIG_DDR4) + case PATTERN_KILLER_DQ0_INV: + case PATTERN_KILLER_DQ1_INV: + case PATTERN_KILLER_DQ2_INV: + case PATTERN_KILLER_DQ3_INV: + case PATTERN_KILLER_DQ4_INV: + case PATTERN_KILLER_DQ5_INV: + case PATTERN_KILLER_DQ6_INV: + case PATTERN_KILLER_DQ7_INV: + pattern = ~pattern_table_get_killer_word_4( + (u8)(type - PATTERN_KILLER_DQ0_INV), index); + break; + case PATTERN_RESONANCE_1T: + case PATTERN_RESONANCE_2T: + case PATTERN_RESONANCE_3T: + case PATTERN_RESONANCE_4T: + case PATTERN_RESONANCE_5T: + case PATTERN_RESONANCE_6T: + case PATTERN_RESONANCE_7T: + case PATTERN_RESONANCE_8T: + case PATTERN_RESONANCE_9T: + { + u8 t_num = (u8)(type - PATTERN_RESONANCE_1T); + u8 t_end = (59 / t_num) * t_num; + if (index < t_end) + pattern = ((index % (t_num * 2)) >= t_num) ? 0xffffffff : 0x00000000; + else + pattern = ((index % 2) == 0) ? 0xffffffff : 0x00000000; + } + break; + case PATTERN_ZERO: + pattern = PATTERN_00; + break; + case PATTERN_ONE: + pattern = PATTERN_FF; + break; + case PATTERN_VREF_INV: + pattern = ~pattern_table_get_vref_word(index); + break; +#endif /* CONFIG_DDR4 */ default: printf("error: %s: unsupported pattern type [%d] found\n", __func__, (int)type); @@ -761,16 +916,24 @@ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) case PATTERN_PBS1: case PATTERN_PBS2: case PATTERN_PBS3: +#if !defined(CONFIG_DDR4) pattern = PATTERN_55AA; +#endif /* !CONFIG_DDR4 */ break; case PATTERN_RL: +#if !defined(CONFIG_DDR4) if (index < 3) pattern = PATTERN_00; else pattern = PATTERN_80; +#else /* CONFIG_DDR4 */ + pattern = PATTERN_00; +#endif /* !CONFIG_DDR4 */ break; case PATTERN_STATIC_PBS: +#if !defined(CONFIG_DDR4) pattern = PATTERN_00FF; +#endif /* !CONFIG_DDR4 */ break; case PATTERN_KILLER_DQ0: case PATTERN_KILLER_DQ1: @@ -784,25 +947,40 @@ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) (u8)(type - PATTERN_KILLER_DQ0), index); break; case PATTERN_RL2: +#if !defined(CONFIG_DDR4) if (index < 3) pattern = PATTERN_00; else pattern = PATTERN_01; +#endif /* !CONFIG_DDR4 */ break; case PATTERN_TEST: +#if !defined(CONFIG_DDR4) if ((index == 0) || (index == 3)) pattern = 0x00000000; else pattern = 0xFFFFFFFF; +#else /* CONFIG_DDR4 */ + if ((index > 1) && (index < 6)) + pattern = PATTERN_20; + else + pattern = PATTERN_00; +#endif /* !CONFIG_DDR4 */ break; case PATTERN_FULL_SSO0: +#if !defined(CONFIG_DDR4) pattern = 0x0000ffff; break; +#endif /* !CONFIG_DDR4 */ case PATTERN_FULL_SSO1: case PATTERN_FULL_SSO2: case PATTERN_FULL_SSO3: pattern = pattern_table_get_sso_word( +#if !defined(CONFIG_DDR4) (u8)(type - PATTERN_FULL_SSO1), index); +#else /* CONFIG_DDR4 */ + (u8)(type - PATTERN_FULL_SSO0), index); +#endif /* !CONFIG_DDR4 */ break; case PATTERN_VREF: pattern = pattern_table_get_vref_word16(index); @@ -832,6 +1010,40 @@ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) case PATTERN_ISI_XTALK_FREE: pattern = pattern_table_get_isi_word16(index); break; +#if defined(CONFIG_DDR4) + case PATTERN_KILLER_DQ0_INV: + case PATTERN_KILLER_DQ1_INV: + case PATTERN_KILLER_DQ2_INV: + case PATTERN_KILLER_DQ3_INV: + case PATTERN_KILLER_DQ4_INV: + case PATTERN_KILLER_DQ5_INV: + case PATTERN_KILLER_DQ6_INV: + case PATTERN_KILLER_DQ7_INV: + pattern = ~pattern_table_get_killer_word16( + (u8)(type - PATTERN_KILLER_DQ0_INV), index); + break; + case PATTERN_RESONANCE_1T: + case PATTERN_RESONANCE_2T: + case PATTERN_RESONANCE_3T: + case PATTERN_RESONANCE_4T: + case PATTERN_RESONANCE_5T: + case PATTERN_RESONANCE_6T: + case PATTERN_RESONANCE_7T: + case PATTERN_RESONANCE_8T: + case PATTERN_RESONANCE_9T: + { + u8 t_num = (u8)(type - PATTERN_RESONANCE_1T); + u8 t_end = (59 / t_num) * t_num; + if (index < t_end) + pattern = ((index % (t_num * 2)) >= t_num) ? 0xffffffff : 0x00000000; + else + pattern = ((index % 2) == 0) ? 0xffffffff : 0x00000000; + } + break; + case PATTERN_VREF_INV: + pattern = ~pattern_table_get_vref_word16(index); + break; +#endif /* CONFIG_DDR4 */ default: if (((int)type == 29) || ((int)type == 30)) break; diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip.h b/drivers/ddr/marvell/a38x/ddr3_training_ip.h index 056c21497c..37d21f2b2b 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip.h @@ -42,6 +42,13 @@ #define WRITE_LEVELING_LF_MASK_BIT 0x02000000 /* DDR4 Specific Training Mask bits */ +#if defined (CONFIG_DDR4) +#define RECEIVER_CALIBRATION_MASK_BIT 0x04000000 +#define WL_PHASE_CORRECTION_MASK_BIT 0x08000000 +#define DQ_VREF_CALIBRATION_MASK_BIT 0x10000000 +#define DQ_MAPPING_MASK_BIT 0x20000000 +#define DM_TUNING_MASK_BIT 0x40000000 +#endif /* CONFIG_DDR4 */ enum hws_result { TEST_FAILED = 0, @@ -63,6 +70,9 @@ enum auto_tune_stage { WRITE_LEVELING, LOAD_PATTERN_2, READ_LEVELING, +#if defined(CONFIG_DDR4) + SW_READ_LEVELING, +#endif /* CONFIG_DDR4 */ WRITE_LEVELING_SUPP, PBS_RX, PBS_TX, @@ -78,6 +88,13 @@ enum auto_tune_stage { TX_EMPHASIS, LOAD_PATTERN_HIGH, PER_BIT_READ_LEVELING_TF, +#if defined(CONFIG_DDR4) + RECEIVER_CALIBRATION, + WL_PHASE_CORRECTION, + DQ_VREF_CALIBRATION, + DM_TUNING, + DQ_MAPPING, +#endif /* CONFIG_DDR4 */ WRITE_LEVELING_LF, MAX_STAGE_LIMIT }; diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_db.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_db.h index e28b7ecee1..7b24c1f1a8 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_db.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_db.h @@ -7,6 +7,66 @@ #define _DDR3_TRAINING_IP_DB_H_ enum hws_pattern { +#if defined(CONFIG_DDR4) /* DDR4 16/32-bit */ + PATTERN_PBS1,/*0*/ + PATTERN_PBS2, + PATTERN_PBS3, + PATTERN_TEST, + PATTERN_RL, + PATTERN_RL2, + PATTERN_STATIC_PBS, + PATTERN_KILLER_DQ0, + PATTERN_KILLER_DQ1, + PATTERN_KILLER_DQ2, + PATTERN_KILLER_DQ3,/*10*/ + PATTERN_KILLER_DQ4, + PATTERN_KILLER_DQ5, + PATTERN_KILLER_DQ6, + PATTERN_KILLER_DQ7, + PATTERN_KILLER_DQ0_INV, + PATTERN_KILLER_DQ1_INV, + PATTERN_KILLER_DQ2_INV, + PATTERN_KILLER_DQ3_INV, + PATTERN_KILLER_DQ4_INV, + PATTERN_KILLER_DQ5_INV,/*20*/ + PATTERN_KILLER_DQ6_INV, + PATTERN_KILLER_DQ7_INV, + PATTERN_VREF, + PATTERN_VREF_INV, + PATTERN_FULL_SSO0, + PATTERN_FULL_SSO1, + PATTERN_FULL_SSO2, + PATTERN_FULL_SSO3, + PATTERN_ZERO, + PATTERN_ONE, + PATTERN_LAST, + PATTERN_SSO_FULL_XTALK_DQ0, + PATTERN_SSO_FULL_XTALK_DQ1,/*30*/ + PATTERN_SSO_FULL_XTALK_DQ2, + PATTERN_SSO_FULL_XTALK_DQ3, + PATTERN_SSO_FULL_XTALK_DQ4, + PATTERN_SSO_FULL_XTALK_DQ5, + PATTERN_SSO_FULL_XTALK_DQ6, + PATTERN_SSO_FULL_XTALK_DQ7, + PATTERN_SSO_XTALK_FREE_DQ0, + PATTERN_SSO_XTALK_FREE_DQ1, + PATTERN_SSO_XTALK_FREE_DQ2, + PATTERN_SSO_XTALK_FREE_DQ3,/*40*/ + PATTERN_SSO_XTALK_FREE_DQ4, + PATTERN_SSO_XTALK_FREE_DQ5, + PATTERN_SSO_XTALK_FREE_DQ6, + PATTERN_SSO_XTALK_FREE_DQ7, + PATTERN_ISI_XTALK_FREE, + PATTERN_RESONANCE_1T, + PATTERN_RESONANCE_2T, + PATTERN_RESONANCE_3T, + PATTERN_RESONANCE_4T, + PATTERN_RESONANCE_5T,/*50*/ + PATTERN_RESONANCE_6T, + PATTERN_RESONANCE_7T, + PATTERN_RESONANCE_8T, + PATTERN_RESONANCE_9T +#else /* DDR3 16/32-bit */ PATTERN_PBS1, PATTERN_PBS2, PATTERN_PBS3, @@ -45,6 +105,7 @@ enum hws_pattern { PATTERN_SSO_XTALK_FREE_DQ6, PATTERN_SSO_XTALK_FREE_DQ7, PATTERN_ISI_XTALK_FREE +#endif /* CONFIG_64BIT */ }; enum mv_wl_supp_mode { diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c index 102f9bd633..2567dc3b3f 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c @@ -205,6 +205,137 @@ struct pattern_info pattern_table_64[] = { /* Note: actual start_address is "<< 3" of defined address */ }; +#if defined(CONFIG_DDR4) +struct pattern_info pattern_table_16[] = { + /* + * num tx phases, tx burst, delay between, rx pattern, + * start_address, pattern_len + */ + {0x1, 0x1, 2, 0x1, 0x0000, 2}, /* PATTERN_PBS1*/ + {0x1, 0x1, 2, 0x1, 0x0080, 2}, /* PATTERN_PBS2*/ + {0x1, 0x1, 2, 0x1, 0x0100, 2}, /* PATTERN_PBS3*/ + {0x1, 0x1, 2, 0x1, 0x0180, 2}, /* PATTERN_TEST*/ + {0x1, 0x1, 2, 0x1, 0x0200, 2}, /* PATTERN_RL*/ + {0x1, 0x1, 2, 0x1, 0x0280, 2}, /* PATTERN_RL2*/ + {0xf, 0x7, 2, 0x7, 0x0680, 16}, /* PATTERN_STATIC_PBS*/ + {0xf, 0x7, 2, 0x7, 0x0A80, 16}, /* PATTERN_KILLER_DQ0*/ + {0xf, 0x7, 2, 0x7, 0x0E80, 16}, /* PATTERN_KILLER_DQ1*/ + {0xf, 0x7, 2, 0x7, 0x1280, 16}, /* PATTERN_KILLER_DQ2*/ + {0xf, 0x7, 2, 0x7, 0x1680, 16}, /* PATTERN_KILLER_DQ3*/ + {0xf, 0x7, 2, 0x7, 0x1A80, 16}, /* PATTERN_KILLER_DQ4*/ + {0xf, 0x7, 2, 0x7, 0x1E80, 16}, /* PATTERN_KILLER_DQ5*/ + {0xf, 0x7, 2, 0x7, 0x2280, 16}, /* PATTERN_KILLER_DQ6*/ + {0xf, 0x7, 2, 0x7, 0x2680, 16}, /* PATTERN_KILLER_DQ7*/ + {0xf, 0x7, 2, 0x7, 0x2A80, 16}, /* PATTERN_KILLER_DQ0_INV*/ + {0xf, 0x7, 2, 0x7, 0x2E80, 16}, /* PATTERN_KILLER_DQ1_INV*/ + {0xf, 0x7, 2, 0x7, 0x3280, 16}, /* PATTERN_KILLER_DQ2_INV*/ + {0xf, 0x7, 2, 0x7, 0x3680, 16}, /* PATTERN_KILLER_DQ3_INV*/ + {0xf, 0x7, 2, 0x7, 0x3A80, 16}, /* PATTERN_KILLER_DQ4_INV*/ + {0xf, 0x7, 2, 0x7, 0x3E80, 16}, /* PATTERN_KILLER_DQ5_INV*/ + {0xf, 0x7, 2, 0x7, 0x4280, 16}, /* PATTERN_KILLER_DQ6_INV*/ + {0xf, 0x7, 2, 0x7, 0x4680, 16}, /* PATTERN_KILLER_DQ7_INV*/ + {0xf, 0x7, 2, 0x7, 0x4A80, 16}, /* PATTERN_VREF*/ + {0xf, 0x7, 2, 0x7, 0x4E80, 16}, /* PATTERN_VREF_INV*/ + {0xf, 0x7, 2, 0x7, 0x5280, 16}, /* PATTERN_FULL_SSO_0T*/ + {0xf, 0x7, 2, 0x7, 0x5680, 16}, /* PATTERN_FULL_SSO_1T*/ + {0xf, 0x7, 2, 0x7, 0x5A80, 16}, /* PATTERN_FULL_SSO_2T*/ + {0xf, 0x7, 2, 0x7, 0x5E80, 16}, /* PATTERN_FULL_SSO_3T*/ + {0xf, 0x7, 2, 0x7, 0x6280, 16}, /* PATTERN_ZERO */ + {0xf, 0x7, 2, 0x7, 0x6680, 16}, /* PATTERN_ONE */ + {0xf, 0x7, 2, 0x7, 0x6A80, 16}, /* PATTERN_SSO_FULL_XTALK_DQ0*/ + {0xf, 0x7, 2, 0x7, 0x6E80, 16}, /* PATTERN_SSO_FULL_XTALK_DQ1*/ + {0xf, 0x7, 2, 0x7, 0x7280, 16}, /* PATTERN_SSO_FULL_XTALK_DQ2*/ + {0xf, 0x7, 2, 0x7, 0x7680, 16}, /* PATTERN_SSO_FULL_XTALK_DQ3*/ + {0xf, 0x7, 2, 0x7, 0x7A80, 16}, /* PATTERN_SSO_FULL_XTALK_DQ4*/ + {0xf, 0x7, 2, 0x7, 0x7E80, 16}, /* PATTERN_SSO_FULL_XTALK_DQ5*/ + {0xf, 0x7, 2, 0x7, 0x8280, 16}, /* PATTERN_SSO_FULL_XTALK_DQ6*/ + {0xf, 0x7, 2, 0x7, 0x8680, 16}, /* PATTERN_SSO_FULL_XTALK_DQ7*/ + {0xf, 0x7, 2, 0x7, 0x8A80, 16}, /* PATTERN_SSO_XTALK_FREE_DQ0*/ + {0xf, 0x7, 2, 0x7, 0x8E80, 16}, /* PATTERN_SSO_XTALK_FREE_DQ1*/ + {0xf, 0x7, 2, 0x7, 0x9280, 16}, /* PATTERN_SSO_XTALK_FREE_DQ2*/ + {0xf, 0x7, 2, 0x7, 0x9680, 16}, /* PATTERN_SSO_XTALK_FREE_DQ3*/ + {0xf, 0x7, 2, 0x7, 0x9A80, 16}, /* PATTERN_SSO_XTALK_FREE_DQ4*/ + {0xf, 0x7, 2, 0x7, 0x9E80, 16}, /* PATTERN_SSO_XTALK_FREE_DQ5*/ + {0xf, 0x7, 2, 0x7, 0xA280, 16}, /* PATTERN_SSO_XTALK_FREE_DQ6*/ + {0xf, 0x7, 2, 0x7, 0xA680, 16}, /* PATTERN_SSO_XTALK_FREE_DQ7*/ + {0xf, 0x7, 2, 0x7, 0xAA80, 16}, /* PATTERN_ISI_XTALK_FREE*/ + {0xf, 0x7, 2, 0x7, 0xAE80, 16}, /* PATTERN_RESONANCE_1T*/ + {0xf, 0x7, 2, 0x7, 0xB280, 16}, /* PATTERN_RESONANCE_2T*/ + {0xf, 0x7, 2, 0x7, 0xB680, 16}, /* PATTERN_RESONANCE_3T*/ + {0xf, 0x7, 2, 0x7, 0xBA80, 16}, /* PATTERN_RESONANCE_4T*/ + {0xf, 0x7, 2, 0x7, 0xBE80, 16}, /* PATTERN_RESONANCE_5T*/ + {0xf, 0x7, 2, 0x7, 0xC280, 16}, /* PATTERN_RESONANCE_6T*/ + {0xf, 0x7, 2, 0x7, 0xC680, 16}, /* PATTERN_RESONANCE_7T*/ + {0xf, 0x7, 2, 0x7, 0xca80, 16}, /* PATTERN_RESONANCE_8T*/ + {0xf, 0x7, 2, 0x7, 0xce80, 16} /* PATTERN_RESONANCE_9T*/ + /* Note: actual start_address is "<< 3" of defined address */ +}; + +struct pattern_info pattern_table_32[] = { + /* + * num tx phases, tx burst, delay between, rx pattern, + * start_address, pattern_len + */ + {0x3, 0x3, 2, 0x3, 0x0000, 4}, /* PATTERN_PBS1*/ + {0x3, 0x3, 2, 0x3, 0x0020, 4}, /* PATTERN_PBS2*/ + {0x3, 0x3, 2, 0x3, 0x0040, 4}, /* PATTERN_PBS3*/ + {0x3, 0x3, 2, 0x3, 0x0060, 4}, /* PATTERN_TEST*/ + {0x3, 0x3, 2, 0x3, 0x0080, 4}, /* PATTERN_RL*/ + {0x3, 0x3, 2, 0x3, 0x00a0, 4}, /* PATTERN_RL2*/ + {0x1f, 0xf, 2, 0xf, 0x00c0, 32}, /* PATTERN_STATIC_PBS*/ + {0x1f, 0xf, 2, 0xf, 0x00e0, 32}, /* PATTERN_KILLER_DQ0*/ + {0x1f, 0xf, 2, 0xf, 0x0100, 32}, /* PATTERN_KILLER_DQ1*/ + {0x1f, 0xf, 2, 0xf, 0x0120, 32}, /* PATTERN_KILLER_DQ2*/ + {0x1f, 0xf, 2, 0xf, 0x0140, 32}, /* PATTERN_KILLER_DQ3*/ + {0x1f, 0xf, 2, 0xf, 0x0160, 32}, /* PATTERN_KILLER_DQ4*/ + {0x1f, 0xf, 2, 0xf, 0x0180, 32}, /* PATTERN_KILLER_DQ5*/ + {0x1f, 0xf, 2, 0xf, 0x01a0, 32}, /* PATTERN_KILLER_DQ6*/ + {0x1f, 0xf, 2, 0xf, 0x01c0, 32}, /* PATTERN_KILLER_DQ7*/ + {0x1f, 0xf, 2, 0xf, 0x01e0, 32}, /* PATTERN_KILLER_DQ0_INV*/ + {0x1f, 0xf, 2, 0xf, 0x0200, 32}, /* PATTERN_KILLER_DQ1_INV*/ + {0x1f, 0xf, 2, 0xf, 0x0220, 32}, /* PATTERN_KILLER_DQ2_INV*/ + {0x1f, 0xf, 2, 0xf, 0x0240, 32}, /* PATTERN_KILLER_DQ3_INV*/ + {0x1f, 0xf, 2, 0xf, 0x0260, 32}, /* PATTERN_KILLER_DQ4_INV*/ + {0x1f, 0xf, 2, 0xf, 0x0280, 32}, /* PATTERN_KILLER_DQ5_INV*/ + {0x1f, 0xf, 2, 0xf, 0x02a0, 32}, /* PATTERN_KILLER_DQ6_INV*/ + {0x1f, 0xf, 2, 0xf, 0x02c0, 32}, /* PATTERN_KILLER_DQ7_INV*/ + {0x1f, 0xf, 2, 0xf, 0x02e0, 32}, /* PATTERN_VREF*/ + {0x1f, 0xf, 2, 0xf, 0x0300, 32}, /* PATTERN_VREF_INV*/ + {0x1f, 0xf, 2, 0xf, 0x0320, 32}, /* PATTERN_FULL_SSO_0T*/ + {0x1f, 0xf, 2, 0xf, 0x0340, 32}, /* PATTERN_FULL_SSO_1T*/ + {0x1f, 0xf, 2, 0xf, 0x0360, 32}, /* PATTERN_FULL_SSO_2T*/ + {0x1f, 0xf, 2, 0xf, 0x0380, 32}, /* PATTERN_FULL_SSO_3T*/ + {0x1f, 0xf, 2, 0xf, 0x6280, 32}, /* PATTERN_ZERO */ + {0x1f, 0xf, 2, 0xf, 0x6680, 32}, /* PATTERN_ONE */ + {0x1f, 0xf, 2, 0xf, 0x6A80, 32}, /* PATTERN_SSO_FULL_XTALK_DQ0*/ + {0x1f, 0xf, 2, 0xf, 0x6E80, 32}, /* PATTERN_SSO_FULL_XTALK_DQ1*/ + {0x1f, 0xf, 2, 0xf, 0x7280, 32}, /* PATTERN_SSO_FULL_XTALK_DQ2*/ + {0x1f, 0xf, 2, 0xf, 0x7680, 32}, /* PATTERN_SSO_FULL_XTALK_DQ3*/ + {0x1f, 0xf, 2, 0xf, 0x7A80, 32}, /* PATTERN_SSO_FULL_XTALK_DQ4*/ + {0x1f, 0xf, 2, 0xf, 0x7E80, 32}, /* PATTERN_SSO_FULL_XTALK_DQ5*/ + {0x1f, 0xf, 2, 0xf, 0x8280, 32}, /* PATTERN_SSO_FULL_XTALK_DQ6*/ + {0x1f, 0xf, 2, 0xf, 0x8680, 32}, /* PATTERN_SSO_FULL_XTALK_DQ7*/ + {0x1f, 0xf, 2, 0xf, 0x8A80, 32}, /* PATTERN_SSO_XTALK_FREE_DQ0*/ + {0x1f, 0xf, 2, 0xf, 0x8E80, 32}, /* PATTERN_SSO_XTALK_FREE_DQ1*/ + {0x1f, 0xf, 2, 0xf, 0x9280, 32}, /* PATTERN_SSO_XTALK_FREE_DQ2*/ + {0x1f, 0xf, 2, 0xf, 0x9680, 32}, /* PATTERN_SSO_XTALK_FREE_DQ3*/ + {0x1f, 0xf, 2, 0xf, 0x9A80, 32}, /* PATTERN_SSO_XTALK_FREE_DQ4*/ + {0x1f, 0xf, 2, 0xf, 0x9E80, 32}, /* PATTERN_SSO_XTALK_FREE_DQ5*/ + {0x1f, 0xf, 2, 0xf, 0xA280, 32}, /* PATTERN_SSO_XTALK_FREE_DQ6*/ + {0x1f, 0xf, 2, 0xf, 0xA680, 32}, /* PATTERN_SSO_XTALK_FREE_DQ7*/ + {0x1f, 0xf, 2, 0xf, 0xAA80, 32}, /* PATTERN_ISI_XTALK_FREE*/ + {0x1f, 0xf, 2, 0xf, 0xAE80, 32}, /* PATTERN_RESONANCE_1T*/ + {0x1f, 0xf, 2, 0xf, 0xB280, 32}, /* PATTERN_RESONANCE_2T*/ + {0x1f, 0xf, 2, 0xf, 0xB680, 32}, /* PATTERN_RESONANCE_3T*/ + {0x1f, 0xf, 2, 0xf, 0xBA80, 32}, /* PATTERN_RESONANCE_4T*/ + {0x1f, 0xf, 2, 0xf, 0xBE80, 32}, /* PATTERN_RESONANCE_5T*/ + {0x1f, 0xf, 2, 0xf, 0xC280, 32}, /* PATTERN_RESONANCE_6T*/ + {0x1f, 0xf, 2, 0xf, 0xC680, 32}, /* PATTERN_RESONANCE_7T*/ + {0x1f, 0xf, 2, 0xf, 0xca80, 32}, /* PATTERN_RESONANCE_8T*/ + {0x1f, 0xf, 2, 0xf, 0xce80, 32} /* PATTERN_RESONANCE_9T*/ + /* Note: actual start_address is "<< 3" of defined address */ +}; +#else /* CONFIG_DDR4 */ struct pattern_info pattern_table_16[] = { /* * num tx phases, tx burst, delay between, rx pattern, @@ -294,6 +425,7 @@ struct pattern_info pattern_table_32[] = { {0x1f, 0xF, 2, 0xf, 0xA280, 32} /* PATTERN_ISI_XTALK_FREE */ /* Note: actual start_address is "<< 3" of defined address */ }; +#endif /* CONFIG_DDR4 */ u32 train_dev_num; enum hws_ddr_cs traintrain_cs_type; @@ -309,7 +441,12 @@ enum hws_pattern train_pattern; enum hws_edge_compare train_edge_compare; u32 train_cs_num; u32 train_if_acess, train_if_id, train_pup_access; +#if defined(CONFIG_DDR4) +/* The counter was increased for DDR4 because of A390 DB-GP DDR4 failure */ +u32 max_polling_for_done = 100000000; +#else /* CONFIG_DDR4 */ u32 max_polling_for_done = 1000000; +#endif /* CONFIG_DDR4 */ u32 *ddr3_tip_get_buf_ptr(u32 dev_num, enum hws_search_dir search, enum hws_training_result result_type, @@ -561,6 +698,10 @@ int ddr3_tip_ip_training(u32 dev_num, enum hws_access_type access_type, ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG, 0, MASK_ALL_BITS); +#if defined(CONFIG_DDR4) + if (tm->debug_level != DEBUG_LEVEL_ERROR) + refresh(); +#endif return MV_OK; } @@ -837,6 +978,10 @@ int ddr3_tip_read_training_result(u32 dev_num, u32 if_id, } } } +#if defined(CONFIG_DDR4) + if (tm->debug_level != DEBUG_LEVEL_ERROR) + refresh(); +#endif return MV_OK; } diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h index 55832a5540..16a59512ee 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h @@ -46,6 +46,11 @@ enum mr_number { MR_CMD1, MR_CMD2, MR_CMD3, +#if defined(CONFIG_DDR4) + MR_CMD4, + MR_CMD5, + MR_CMD6, +#endif MR_LAST }; diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c index 6523281f2b..55abbad5a7 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c @@ -1667,6 +1667,59 @@ enum rl_dqs_burst_state { RL_BEHIND }; +#if defined(CONFIG_DDR4) +static int mpr_rd_frmt_config( + enum mv_ddr_mpr_ps ps, + enum mv_ddr_mpr_op op, + enum mv_ddr_mpr_rd_frmt rd_frmt, + u8 cs_bitmask, u8 dis_auto_refresh) +{ + u32 val, mask; + u8 cs_bitmask_inv; + + + if (dis_auto_refresh == 1) { + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, ODPG_CTRL_CTRL_REG, + ODPG_CTRL_AUTO_REFRESH_DIS << ODPG_CTRL_AUTO_REFRESH_OFFS, + ODPG_CTRL_AUTO_REFRESH_MASK << ODPG_CTRL_AUTO_REFRESH_OFFS); + } else { + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, ODPG_CTRL_CTRL_REG, + ODPG_CTRL_AUTO_REFRESH_ENA << ODPG_CTRL_AUTO_REFRESH_OFFS, + ODPG_CTRL_AUTO_REFRESH_MASK << ODPG_CTRL_AUTO_REFRESH_OFFS); + } + + /* configure MPR Location for MPR write and read accesses within the selected page */ + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, DDR4_MPR_WR_REG, + DDR4_MPR_LOC3 << DDR4_MPR_LOC_OFFS, + DDR4_MPR_LOC_MASK << DDR4_MPR_LOC_OFFS); + + /* configure MPR page selection, operation and read format */ + val = ps << DDR4_MPR_PS_OFFS | + op << DDR4_MPR_OP_OFFS | + rd_frmt << DDR4_MPR_RF_OFFS; + mask = DDR4_MPR_PS_MASK << DDR4_MPR_PS_OFFS | + DDR4_MPR_OP_MASK << DDR4_MPR_OP_OFFS | + DDR4_MPR_RF_MASK << DDR4_MPR_RF_OFFS; + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, DDR4_MR3_REG, val, mask); + + /* prepare cs bitmask in active low format */ + cs_bitmask_inv = ~cs_bitmask & SDRAM_OP_CMD_ALL_CS_MASK; + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, SDRAM_OP_REG, + CMD_DDR3_DDR4_MR3 << SDRAM_OP_CMD_OFFS | + cs_bitmask_inv << SDRAM_OP_CMD_CS_OFFS(0), + SDRAM_OP_CMD_MASK << SDRAM_OP_CMD_OFFS | + SDRAM_OP_CMD_ALL_CS_MASK << SDRAM_OP_CMD_CS_OFFS(0)); + + if (ddr3_tip_if_polling(0, ACCESS_TYPE_UNICAST, 0, + CMD_NORMAL, SDRAM_OP_CMD_MASK, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS)) { + printf("error: %s failed\n", __func__); + return -1; + } + + return 0; +} +#endif /* CONFIG_DDR4 */ int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq) { @@ -1690,6 +1743,19 @@ int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq) u32 reg_val, reg_mask; uintptr_t test_addr = TEST_ADDR; +#if defined(CONFIG_DDR4) + int status; + u8 cs_bitmask = tm->interface_params[0].as_bus_params[0].cs_bitmask; + u8 curr_cs_bitmask_inv; + + /* enable MPR for all existing chip-selects */ + status = mpr_rd_frmt_config(DDR4_MPR_PAGE0, + DDR4_MPR_OP_ENA, + DDR4_MPR_RF_SERIAL, + cs_bitmask, 1); + if (status) + return status; +#endif /* CONFIG_DDR4 */ /* initialization */ if (mv_ddr_is_ecc_ena()) { @@ -1728,6 +1794,48 @@ int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq) /* search for dqs edges per subphy */ if_id = 0; for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { +#if defined(CONFIG_DDR4) + /* enable read preamble training mode for chip-select under test */ + ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + DDR4_MR4_REG, + DDR4_RPT_ENA << DDR4_RPT_OFFS, + DDR4_RPT_MASK << DDR4_RPT_OFFS); + /* prepare current cs bitmask in active low format */ + curr_cs_bitmask_inv = ~(1 << effective_cs) & SDRAM_OP_CMD_ALL_CS_MASK; + reg_val = curr_cs_bitmask_inv << SDRAM_OP_CMD_CS_OFFS(0) | + CMD_DDR4_MR4 << SDRAM_OP_CMD_OFFS; + reg_mask = SDRAM_OP_CMD_ALL_CS_MASK << SDRAM_OP_CMD_CS_OFFS(0) | + SDRAM_OP_CMD_MASK << SDRAM_OP_CMD_OFFS; + ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + SDRAM_OP_REG, reg_val, reg_mask); + if (ddr3_tip_if_polling(0, ACCESS_TYPE_UNICAST, 0, + CMD_NORMAL, SDRAM_OP_CMD_MASK, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS)) { + printf("error: %s failed\n", __func__); + return -1; + } + + /* disable preamble training mode for existing chip-selects not under test */ + ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + DDR4_MR4_REG, + DDR4_RPT_DIS << DDR4_RPT_OFFS, + DDR4_RPT_MASK << DDR4_RPT_OFFS); + /* prepare bitmask for existing chip-selects not under test in active low format */ + reg_val = ((~(curr_cs_bitmask_inv & cs_bitmask) & SDRAM_OP_CMD_ALL_CS_MASK) << + SDRAM_OP_CMD_CS_OFFS(0)) | + CMD_DDR4_MR4 << SDRAM_OP_CMD_OFFS; + reg_mask = SDRAM_OP_CMD_ALL_CS_MASK << SDRAM_OP_CMD_CS_OFFS(0) | + SDRAM_OP_CMD_MASK << SDRAM_OP_CMD_OFFS; + ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + SDRAM_OP_REG, reg_val, reg_mask); + if (ddr3_tip_if_polling(0, ACCESS_TYPE_UNICAST, 0, + CMD_NORMAL, SDRAM_OP_CMD_MASK, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS)) { + printf("error: %s failed\n", __func__); + return -1; + } + +#endif /* CONFIG_DDR4 */ pass_lock_num = init_pass_lock_num; ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG, @@ -1948,6 +2056,33 @@ int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq) CHECK_STATUS(ddr3_tip_write_additional_odt_setting(dev_num, if_id)); } +#if defined(CONFIG_DDR4) + /* disable read preamble training mode for all existing chip-selects */ + ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + DDR4_MR4_REG, + DDR4_RPT_DIS << DDR4_RPT_OFFS, + DDR4_RPT_MASK << DDR4_RPT_OFFS); + reg_val = (~cs_bitmask & SDRAM_OP_CMD_ALL_CS_MASK) << SDRAM_OP_CMD_CS_OFFS(0) | + CMD_DDR4_MR4 << SDRAM_OP_CMD_OFFS; + reg_mask = SDRAM_OP_CMD_ALL_CS_MASK << SDRAM_OP_CMD_CS_OFFS(0) | + SDRAM_OP_CMD_MASK << SDRAM_OP_CMD_OFFS; + ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + SDRAM_OP_REG, reg_val, reg_mask); + if (ddr3_tip_if_polling(0, ACCESS_TYPE_UNICAST, 0, + CMD_NORMAL, SDRAM_OP_CMD_MASK, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS)) { + printf("error: %s failed\n", __func__); + return -1; + } + + /* disable MPR for all existing chip-selects */ + status = mpr_rd_frmt_config(DDR4_MPR_PAGE0, + DDR4_MPR_OP_DIS, + DDR4_MPR_RF_SERIAL, + cs_bitmask, 0); + if (status) + return status; +#endif /* CONFIG_DDR4 */ /* reset read fifo assertion */ ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, if_id, SDRAM_CFG_REG, diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_mpr_pda_if.c b/drivers/ddr/marvell/a38x/mv_ddr4_mpr_pda_if.c new file mode 100644 index 0000000000..f742b5a9bc --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_mpr_pda_if.c @@ -0,0 +1,674 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#if defined(CONFIG_DDR4) + +/* DDR4 MPR/PDA Interface */ +#include "ddr3_init.h" +#include "mv_ddr4_mpr_pda_if.h" +#include "mv_ddr4_training.h" +#include "mv_ddr_training_db.h" +#include "mv_ddr_common.h" +#include "mv_ddr_regs.h" + +static u8 dram_to_mc_dq_map[MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; +static int dq_map_enable; + +static u32 mv_ddr4_tx_odt_get(void) +{ + u16 odt = 0xffff, rtt = 0xffff; + + if (g_odt_config & 0xe0000) + rtt = mv_ddr4_rtt_nom_to_odt(g_rtt_nom); + else if (g_odt_config & 0x10000) + rtt = mv_ddr4_rtt_wr_to_odt(g_rtt_wr); + else + return odt; + + return (odt * rtt) / (odt + rtt); +} + +/* + * mode registers initialization function + * replaces all MR writes in DDR3 init function + */ +int mv_ddr4_mode_regs_init(u8 dev_num) +{ + int status; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + enum hws_access_type access_type = ACCESS_TYPE_UNICAST; + u32 if_id; + u32 cl, cwl; + u32 val, mask; + u32 t_wr, t_ckclk; + /* design GL params to be set outside */ + u32 dic = 0; + u32 ron = 30; /* znri */ + u32 rodt = mv_ddr4_tx_odt_get(); /* effective rtt */ + /* vref percentage presented as 100 x percentage value (e.g., 6000 = 100 x 60%) */ + u32 vref = ((ron + rodt / 2) * 10000) / (ron + rodt); + u32 range = (vref >= 6000) ? 0 : 1; /* if vref is >= 60%, use upper range */ + u32 tap; + u32 refresh_mode; + + if (range == 0) + tap = (vref - 6000) / 65; + else + tap = (vref - 4500) / 65; + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + cl = tm->interface_params[if_id].cas_l; + cwl = tm->interface_params[if_id].cas_wl; + t_ckclk = MEGA / mv_ddr_freq_get(tm->interface_params[if_id].memory_freq); + t_wr = time_to_nclk(mv_ddr_speed_bin_timing_get(tm->interface_params[if_id].speed_bin_index, + SPEED_BIN_TWR), t_ckclk) - 1; + + /* TODO: replace hard-coded values with appropriate defines */ + /* DDR4 MR0 */ + /* + * [6:4,2] bits to be taken from S@R frequency and speed bin + * rtt_nom to be taken from the algorithm definition + * dic to be taken fro the algorithm definition - + * set to 0x1 (for driver rzq/5 = 48 ohm) or + * set to 0x0 (for driver rzq/7 = 34 ohm) + */ + /* set dll reset, 0x1900[8] to 0x1 */ + /* set tm, 0x1900[7] to 0x0 */ + /* set rbt, 0x1900[3] to 0x0 */ + /* set bl, 0x1900[1:0] to 0x0 */ + val = ((cl_mask_table[cl] & 0x1) << 2) | + (((cl_mask_table[cl] & 0xe) >> 1) << 4) | + (twr_mask_table[t_wr + 1] << 9) | + (0x1 << 8) | (0x0 << 7) | (0x0 << 3) | 0x0; + mask = (0x1 << 2) | (0x7 << 4) | (0x7 << 9) | + (0x1 << 8) | (0x1 << 7) | (0x1 << 3) | 0x3; + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR0_REG, + val, mask); + if (status != MV_OK) + return status; + + /* DDR4 MR1 */ + /* set rtt nom to 0 if rtt park is activated (not zero) */ + if ((g_rtt_park >> 6) != 0x0) + g_rtt_nom = 0; + /* set tdqs, 0x1904[11] to 0x0 */ + /* set al, 0x1904[4:3] to 0x0 */ + /* dic, 0x1904[2:1] */ + /* dll enable */ + val = g_rtt_nom | (0x0 << 11) | (0x0 << 3) | (dic << 1) | 0x1; + mask = (0x7 << 8) | (0x1 << 11) | (0x3 << 3) | (0x3 << 1) | 0x1; + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR1_REG, + val, mask); + if (status != MV_OK) + return status; + + /* DDR4 MR2 */ + /* set rtt wr, 0x1908[10,9] to 0x0 */ + /* set wr crc, 0x1908[12] to 0x0 */ + /* cwl */ + val = g_rtt_wr | (0x0 << 12) | (cwl_mask_table[cwl] << 3); + mask = (0x3 << 9) | (0x1 << 12) | (0x7 << 3); + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR2_REG, + val, mask); + if (status != MV_OK) + return status; + + /* DDR4 MR3 */ + /* set fgrm, 0x190C[8:6] to 0x0 */ + /* set gd, 0x190C[3] to 0x0 */ + refresh_mode = (tm->interface_params[if_id].interface_temp == MV_DDR_TEMP_HIGH) ? 1 : 0; + + val = (refresh_mode << 6) | (0x0 << 3); + mask = (0x7 << 6) | (0x1 << 3); + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR3_REG, + val, mask); + if (status != MV_OK) + return status; + + /* DDR4 MR4 */ + /* + * set wp, 0x1910[12] to 0x0 + * set rp, 0x1910[11] to 0x0 + * set rp training, 0x1910[10] to 0x0 + * set sra, 0x1910[9] to 0x0 + * set cs2cmd, 0x1910[8:6] to 0x0 + * set mpd, 0x1910[1] to 0x0 + */ + mask = (0x1 << 12) | (0x1 << 11) | (0x1 << 10) | (0x1 << 9) | (0x7 << 6) | (0x1 << 1); + val = (0x0 << 12) | (0x1 << 11) | (0x0 << 10) | (0x0 << 9) | (0x0 << 6) | (0x0 << 1); + + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR4_REG, + val, mask); + if (status != MV_OK) + return status; + + /* DDR4 MR5 */ + /* + * set rdbi, 0x1914[12] to 0x0 during init sequence (may be enabled with + * op cmd mrs - bug in z1, to be fixed in a0) + * set wdbi, 0x1914[11] to 0x0 + * set dm, 0x1914[10] to 0x1 + * set ca_pl, 0x1914[2:0] to 0x0 + * set odt input buffer during power down mode, 0x1914[5] to 0x1 + */ + mask = (0x1 << 12) | (0x1 << 11) | (0x1 << 10) | (0x7 << 6) | (0x1 << 5) | 0x7; + val = (0x0 << 12) | (0x0 << 11) | (0x1 << 10) | g_rtt_park | (0x1 << 5) | 0x0; + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR5_REG, + val, mask); + if (status != MV_OK) + return status; + + /* DDR4 MR6 */ + /* + * set t_ccd_l, 0x1918[12:10] to 0x0, 0x2, or 0x4 (z1 supports only even + * values, to be fixed in a0) + * set vdq te, 0x1918[7] to 0x0 + * set vdq tv, 0x1918[5:0] to vref training value + */ + mask = (0x7 << 10) | (0x1 << 7) | (0x1 << 6) | 0x3f; + val = (0x2 << 10) | (0x0 << 7) | (range << 6) | tap; + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR6_REG, + val, mask); + if (status != MV_OK) + return status; + } + + return MV_OK; +} + +/* enter mpr read mode */ +static int mv_ddr4_mpr_read_mode_enable(u8 dev_num, u32 mpr_num, u32 page_num, + enum mv_ddr4_mpr_read_format read_format) +{ + /* + * enable MPR page 2 mpr mode in DDR4 MR3 + * read_format: 0 for serial, 1 for parallel, and 2 for staggered + * TODO: add support for cs, multicast or unicast, and if id + */ + int status; + u32 val, mask, if_id = 0; + + if (page_num != 0) { + /* serial is the only read format if the page is other than 0 */ + read_format = MV_DDR4_MPR_READ_SERIAL; + } + + val = (page_num << 0) | (0x1 << 2) | (read_format << 11); + mask = (0x3 << 0) | (0x1 << 2) | (0x3 << 11); + + /* cs0 */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DDR4_MR3_REG, val, mask); + if (status != MV_OK) + return status; + + /* op cmd: cs0, cs1 are on, cs2, cs3 are off */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, SDRAM_OP_REG, + (0x9 | (0xc << 8)) , (0x1f | (0xf << 8))); + if (status != MV_OK) + return status; + + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_mpr_read_mode_enable: DDR3 poll failed(MPR3)\n")); + } + + return MV_OK; +} + +/* exit mpr read or write mode */ +static int mv_ddr4_mpr_mode_disable(u8 dev_num) +{ + /* TODO: add support for cs, multicast or unicast, and if id */ + int status; + u32 val, mask, if_id = 0; + + /* exit mpr */ + val = 0x0 << 2; + mask = 0x1 << 2; + /* cs0 */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DDR4_MR3_REG, val, mask); + if (status != MV_OK) + return status; + + /* op cmd: cs0, cs1 are on, cs2, cs3 are off */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, SDRAM_OP_REG, + (0x9 | (0xc << 8)) , (0x1f | (0xf << 8))); + if (status != MV_OK) + return status; + + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_mpr_mode_disable: DDR3 poll failed(MPR3)\n")); + } + + return MV_OK; +} + +/* translate dq read value per dram dq pin */ +static int mv_ddr4_dq_decode(u8 dev_num, u32 *data) +{ + u32 subphy_num, dq_num; + u32 dq_val = 0, raw_data, idx; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + u32 subphy_max = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); + + /* suppose the third word is stable */ + raw_data = data[2]; + + /* skip ecc supbhy; TODO: check to add support for ecc */ + if (subphy_max % 2) + subphy_max -= 1; + + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + for (dq_num = 0; dq_num < BUS_WIDTH_IN_BITS; dq_num++) { + idx = (dram_to_mc_dq_map[subphy_num][dq_num] + (subphy_num * BUS_WIDTH_IN_BITS)); + dq_val |= (((raw_data & (1 << idx)) >> idx) << ((subphy_num * BUS_WIDTH_IN_BITS) + dq_num)); + } + } + + /* update burst words[0..7] with correct mapping */ + for (idx = 0; idx < EXT_ACCESS_BURST_LENGTH; idx++) + data[idx] = dq_val; + + return MV_OK; +} + +/* + * read mpr value per requested format and type + * note: for parallel decoded read, data is presented as stored in mpr on dram side, + * for all others, data to be presneted "as is" (i.e. per dq order from high to low + * and bus pins connectivity). + */ +int mv_ddr4_mpr_read(u8 dev_num, u32 mpr_num, u32 page_num, + enum mv_ddr4_mpr_read_format read_format, + enum mv_ddr4_mpr_read_type read_type, + u32 *data) +{ + /* TODO: add support for multiple if_id, dev num, and cs */ + u32 word_idx, if_id = 0; + volatile unsigned long *addr = NULL; + + /* enter mpr read mode */ + mv_ddr4_mpr_read_mode_enable(dev_num, mpr_num, page_num, read_format); + + /* set pattern type*/ + ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DDR4_MPR_WR_REG, + mpr_num << 8, 0x3 << 8); + + for (word_idx = 0; word_idx < EXT_ACCESS_BURST_LENGTH; word_idx++) { + data[word_idx] = *addr; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("mv_ddr4_mpr_read: addr 0x%08lx, data 0x%08x\n", + (unsigned long)addr, data[word_idx])); + addr++; + } + + /* exit mpr read mode */ + mv_ddr4_mpr_mode_disable(dev_num); + + /* decode mpr read value (only parallel mode supported) */ + if ((read_type == MV_DDR4_MPR_READ_DECODED) && (read_format == MV_DDR4_MPR_READ_PARALLEL)) { + if (dq_map_enable == 1) { + mv_ddr4_dq_decode(dev_num, data); + } else { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_mpr_read: run mv_ddr4_dq_pins_mapping()\n")); + return MV_FAIL; + } + } + + return MV_OK; +} + +/* enter mpr write mode */ +static int mv_ddr4_mpr_write_mode_enable(u8 dev_num, u32 mpr_location, u32 page_num, u32 data) +{ + /* + * enable MPR page 2 mpr mode in DDR4 MR3 + * TODO: add support for cs, multicast or unicast, and if id + */ + int status; + u32 if_id = 0, val = 0, mask; + + val = (page_num << 0) | (0x1 << 2); + mask = (0x3 << 0) | (0x1 << 2); + /* cs0 */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DDR4_MR3_REG, val, mask); + if (status != MV_OK) + return status; + + /* cs0 */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DDR4_MPR_WR_REG, + (mpr_location << 8) | data, 0x3ff); + if (status != MV_OK) + return status; + + /* op cmd: cs0, cs1 are on, cs2, cs3 are off */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, SDRAM_OP_REG, + (0x13 | 0xc << 8) , (0x1f | (0xf << 8))); + if (status != MV_OK) + return status; + + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_mpr_write_mode_enable: DDR3 poll failed(MPR3)\n")); + } + + return MV_OK; +} + +/* write mpr value */ +int mv_ddr4_mpr_write(u8 dev_num, u32 mpr_location, u32 mpr_num, u32 page_num, u32 data) +{ + /* enter mpr write mode */ + mv_ddr4_mpr_write_mode_enable(dev_num, mpr_location, page_num, data); + + /* TODO: implement this function */ + + /* TODO: exit mpr write mode */ + + return MV_OK; +} + +/* + * map physical on-board connection of dram dq pins to ddr4 controller pins + * note: supports only 32b width + * TODO: add support for 64-bit bus width and ecc subphy + */ +int mv_ddr4_dq_pins_mapping(u8 dev_num) +{ + static int run_once; + u8 dq_val[MAX_BUS_NUM][BUS_WIDTH_IN_BITS] = { {0} }; + u32 mpr_pattern[MV_DDR4_MPR_READ_PATTERN_NUM][EXT_ACCESS_BURST_LENGTH] = { {0} }; + u32 subphy_num, dq_num, mpr_type; + u8 subphy_pattern[3]; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + u32 subphy_max = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); + + if (run_once) + return MV_OK; + else + run_once++; + + /* clear dq mapping */ + memset(dram_to_mc_dq_map, 0, sizeof(dram_to_mc_dq_map)); + + /* stage 1: read page 0 mpr0..2 raw patterns */ + for (mpr_type = 0; mpr_type < MV_DDR4_MPR_READ_PATTERN_NUM; mpr_type++) + mv_ddr4_mpr_read(dev_num, mpr_type, 0, MV_DDR4_MPR_READ_PARALLEL, + MV_DDR4_MPR_READ_RAW, mpr_pattern[mpr_type]); + + /* stage 2: map every dq for each subphy to 3-bit value, create local database */ + /* skip ecc supbhy; TODO: check to add support for ecc */ + if (subphy_max % 2) + subphy_max -= 1; + + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + /* extract pattern for each subphy */ + for (mpr_type = 0; mpr_type < MV_DDR4_MPR_READ_PATTERN_NUM; mpr_type++) + subphy_pattern[mpr_type] = ((mpr_pattern[mpr_type][2] >> (subphy_num * 8)) & 0xff); + + for (dq_num = 0; dq_num < BUS_WIDTH_IN_BITS; dq_num++) + for (mpr_type = 0; mpr_type < MV_DDR4_MPR_READ_PATTERN_NUM; mpr_type++) + dq_val[subphy_num][dq_num] += (((subphy_pattern[mpr_type] >> dq_num) & 1) * + (1 << mpr_type)); + } + + /* stage 3: map dram dq to mc dq and update database */ + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + for (dq_num = 0; dq_num < BUS_WIDTH_IN_BITS; dq_num++) + dram_to_mc_dq_map[subphy_num][7 - dq_val[subphy_num][dq_num]] = dq_num; + } + + /* set dq_map_enable */ + dq_map_enable = 1; + + return MV_OK; +} + +/* enter to or exit from dram vref training mode */ +int mv_ddr4_vref_training_mode_ctrl(u8 dev_num, u8 if_id, enum hws_access_type access_type, int enable) +{ + int status; + u32 val, mask; + + /* DDR4 MR6 */ + /* + * set t_ccd_l, 0x1918[12:10] to 0x0, 0x2, or 0x4 (z1 supports only even + * values, to be fixed in a0) + * set vdq te, 0x1918[7] to 0x0 + * set vdq tv, 0x1918[5:0] to vref training value + */ + + val = (((enable == 1) ? 1 : 0) << 7); + mask = (0x1 << 7); + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR6_REG, val, mask); + if (status != MV_OK) + return status; + + /* write DDR4 MR6 cs configuration; only cs0, cs1 supported */ + if (effective_cs == 0) + val = 0xe; + else + val = 0xd; + val <<= 8; + /* write DDR4 MR6 command */ + val |= 0x12; + mask = (0xf << 8) | 0x1f; + status = ddr3_tip_if_write(dev_num, access_type, if_id, SDRAM_OP_REG, val, mask); + if (status != MV_OK) + return status; + + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_vref_training_mode_ctrl: Polling command failed\n")); + } + + return MV_OK; +} + +/* set dram vref tap value */ +int mv_ddr4_vref_tap_set(u8 dev_num, u8 if_id, enum hws_access_type access_type, + u32 taps_num, enum mv_ddr4_vref_tap_state state) +{ + int status; + u32 range, vdq_tv; + + /* disable and then enable the training with a new range */ + if ((state == MV_DDR4_VREF_TAP_BUSY) && ((taps_num + MV_DDR4_VREF_STEP_SIZE) >= 23) && + (taps_num < 23)) + state = MV_DDR4_VREF_TAP_FLIP; + + if (taps_num < 23) { + range = 1; + vdq_tv = taps_num; + } else { + range = 0; + vdq_tv = taps_num - 23; + } + + if ((state == MV_DDR4_VREF_TAP_FLIP) | (state == MV_DDR4_VREF_TAP_START)) { + /* 0 to disable */ + status = mv_ddr4_vref_set(dev_num, if_id, access_type, range, vdq_tv, 0); + if (status != MV_OK) + return status; + /* 1 to enable */ + status = (mv_ddr4_vref_set(dev_num, if_id, access_type, range, vdq_tv, 1)); + if (status != MV_OK) + return status; + } else if (state == MV_DDR4_VREF_TAP_END) { + /* 1 to enable */ + status = (mv_ddr4_vref_set(dev_num, if_id, access_type, range, vdq_tv, 1)); + if (status != MV_OK) + return status; + /* 0 to disable */ + status = mv_ddr4_vref_set(dev_num, if_id, access_type, range, vdq_tv, 0); + if (status != MV_OK) + return status; + } else { + /* 1 to enable */ + status = (mv_ddr4_vref_set(dev_num, if_id, access_type, range, vdq_tv, 1)); + if (status != MV_OK) + return status; + } + + return MV_OK; +} + +/* set dram vref value */ +int mv_ddr4_vref_set(u8 dev_num, u8 if_id, enum hws_access_type access_type, + u32 range, u32 vdq_tv, u8 vdq_training_ena) +{ + int status; + u32 read_data; + u32 val, mask; + + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("mv_ddr4_vref_set: range %d, vdq_tv %d\n", range, vdq_tv)); + + /* DDR4 MR6 */ + /* + * set t_ccd_l, 0x1918[12:10] to 0x0, 0x2, or 0x4 (z1 supports only even + * values, to be fixed in a0) + * set vdq te, 0x1918[7] to 0x0 + * set vdq tr, 0x1918[6] to 0x0 to disable or 0x1 to enable + * set vdq tv, 0x1918[5:0] to vref training value + */ + val = (vdq_training_ena << 7) | (range << 6) | vdq_tv; + mask = (0x0 << 7) | (0x1 << 6) | 0x3f; + + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR6_REG, val, mask); + if (status != MV_OK) + return status; + + ddr3_tip_if_read(dev_num, access_type, if_id, DDR4_MR6_REG, &read_data, 0xffffffff); + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("mv_ddr4_vref_set: MR6 = 0x%x\n", read_data)); + + /* write DDR4 MR6 cs configuration; only cs0, cs1 supported */ + if (effective_cs == 0) + val = 0xe; + else + val = 0xd; + val <<= 8; + /* write DDR4 MR6 command */ + val |= 0x12; + mask = (0xf << 8) | 0x1f; + status = ddr3_tip_if_write(dev_num, access_type, if_id, SDRAM_OP_REG, val, mask); + if (status != MV_OK) + return status; + + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1F, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS) != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_vref_set: Polling command failed\n")); + } + + return MV_OK; +} + +/* pda - load pattern to odpg */ +int mv_ddr4_pda_pattern_odpg_load(u32 dev_num, enum hws_access_type access_type, + u32 if_id, u32 subphy_mask, u32 cs_num) +{ + int status; + u32 pattern_len_count = 0; + u32 data_low[KILLER_PATTERN_LENGTH] = {0}; + u32 data_high[KILLER_PATTERN_LENGTH] = {0}; + u32 val, mask, subphy_num; + + /* + * set 0x1630[10:5] bits to 0x3 (0x1 for 16-bit bus width) + * set 0x1630[14:11] bits to 0x3 (0x1 for 16-bit bus width) + */ + val = (cs_num << 26) | (0x1 << 25) | (0x3 << 11) | (0x3 << 5) | 0x1; + mask = (0x3 << 26) | (0x1 << 25) | (0x3f << 11) | (0x3f << 5) | 0x1; + status = ddr3_tip_if_write(dev_num, access_type, if_id, ODPG_DATA_CTRL_REG, val, mask); + if (status != MV_OK) + return status; + + if (subphy_mask != 0xf) { + for (subphy_num = 0; subphy_num < 4; subphy_num++) + if (((subphy_mask >> subphy_num) & 0x1) == 0) + data_low[0] = (data_low[0] | (0xff << (subphy_num * 8))); + } else + data_low[0] = 0; + + for (pattern_len_count = 0; pattern_len_count < 4; pattern_len_count++) { + data_low[pattern_len_count] = data_low[0]; + data_high[pattern_len_count] = data_low[0]; + } + + for (pattern_len_count = 0; pattern_len_count < 4 ; pattern_len_count++) { + status = ddr3_tip_if_write(dev_num, access_type, if_id, ODPG_DATA_WR_DATA_LOW_REG, + data_low[pattern_len_count], MASK_ALL_BITS); + if (status != MV_OK) + return status; + + status = ddr3_tip_if_write(dev_num, access_type, if_id, ODPG_DATA_WR_DATA_HIGH_REG, + data_high[pattern_len_count], MASK_ALL_BITS); + if (status != MV_OK) + return status; + + status = ddr3_tip_if_write(dev_num, access_type, if_id, ODPG_DATA_WR_ADDR_REG, + pattern_len_count, MASK_ALL_BITS); + if (status != MV_OK) + return status; + } + + status = ddr3_tip_if_write(dev_num, access_type, if_id, ODPG_DATA_BUFFER_OFFS_REG, + 0x0, MASK_ALL_BITS); + if (status != MV_OK) + return status; + + return MV_OK; +} + +/* enable or disable pda */ +int mv_ddr4_pda_ctrl(u8 dev_num, u8 if_id, u8 cs_num, int enable) +{ + /* + * if enable is 0, exit + * mrs to be directed to all dram devices + * a calling function responsible to change odpg to 0x0 + */ + + int status; + enum hws_access_type access_type = ACCESS_TYPE_UNICAST; + u32 val, mask; + + /* per dram addressability enable */ + val = ((enable == 1) ? 1 : 0); + val <<= 4; + mask = 0x1 << 4; + status = ddr3_tip_if_write(dev_num, access_type, if_id, DDR4_MR3_REG, val, mask); + if (status != MV_OK) + return status; + + /* write DDR4 MR3 cs configuration; only cs0, cs1 supported */ + if (cs_num == 0) + val = 0xe; + else + val = 0xd; + val <<= 8; + /* write DDR4 MR3 command */ + val |= 0x9; + mask = (0xf << 8) | 0x1f; + status = ddr3_tip_if_write(dev_num, access_type, if_id, SDRAM_OP_REG, val, mask); + if (status != MV_OK) + return status; + + if (enable == 0) { + /* check odpg access is done */ + if (mv_ddr_is_odpg_done(MAX_POLLING_ITERATIONS) != MV_OK) + return MV_FAIL; + } + + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f, SDRAM_OP_REG, + MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_pda_ctrl: Polling command failed\n")); + + return MV_OK; +} +#endif /* CONFIG_DDR4 */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_mpr_pda_if.h b/drivers/ddr/marvell/a38x/mv_ddr4_mpr_pda_if.h new file mode 100644 index 0000000000..347a1b2237 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_mpr_pda_if.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#ifndef _MV_DDR4_MPR_PDA_IF_H +#define _MV_DDR4_MPR_PDA_IF_H + +#include "ddr3_init.h" +#include "mv_ddr_common.h" + +#define MV_DDR4_VREF_STEP_SIZE 3 +#define MV_DDR4_VREF_MIN_RANGE 1 +#define MV_DDR4_VREF_MAX_RANGE 73 +#define MV_DDR4_VREF_MAX_COUNT (((MV_DDR4_VREF_MAX_RANGE - MV_DDR4_VREF_MIN_RANGE) / MV_DDR4_VREF_STEP_SIZE) + 2) + +#define MV_DDR4_MPR_READ_PATTERN_NUM 3 + +enum mv_ddr4_mpr_read_format { + MV_DDR4_MPR_READ_SERIAL, + MV_DDR4_MPR_READ_PARALLEL, + MV_DDR4_MPR_READ_STAGGERED, + MV_DDR4_MPR_READ_RSVD_TEMP +}; + +enum mv_ddr4_mpr_read_type { + MV_DDR4_MPR_READ_RAW, + MV_DDR4_MPR_READ_DECODED +}; + +enum mv_ddr4_vref_tap_state { + MV_DDR4_VREF_TAP_START, + MV_DDR4_VREF_TAP_BUSY, + MV_DDR4_VREF_TAP_FLIP, + MV_DDR4_VREF_TAP_END +}; + +int mv_ddr4_mode_regs_init(u8 dev_num); +int mv_ddr4_mpr_read(u8 dev_num, u32 mpr_num, u32 page_num, + enum mv_ddr4_mpr_read_format read_format, + enum mv_ddr4_mpr_read_type read_type, + u32 *data); +int mv_ddr4_mpr_write(u8 dev_num, u32 mpr_location, u32 mpr_num, + u32 page_num, u32 data); +int mv_ddr4_dq_pins_mapping(u8 dev_num); +int mv_ddr4_vref_training_mode_ctrl(u8 dev_num, u8 if_id, + enum hws_access_type access_type, + int enable); +int mv_ddr4_vref_tap_set(u8 dev_num, u8 if_id, + enum hws_access_type access_type, + u32 taps_num, + enum mv_ddr4_vref_tap_state state); +int mv_ddr4_vref_set(u8 dev_num, u8 if_id, enum hws_access_type access_type, + u32 range, u32 vdq_tv, u8 vdq_training_ena); +int mv_ddr4_pda_pattern_odpg_load(u32 dev_num, enum hws_access_type access_type, + u32 if_id, u32 subphy_mask, u32 cs_num); +int mv_ddr4_pda_ctrl(u8 dev_num, u8 if_id, u8 cs_num, int enable); + +#endif /* _MV_DDR4_MPR_PDA_IF_H */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_training.c b/drivers/ddr/marvell/a38x/mv_ddr4_training.c new file mode 100644 index 0000000000..cefc2e8b40 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_training.c @@ -0,0 +1,565 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#if defined(CONFIG_DDR4) + +/* DDR4 training service API and data structures */ + +#include "ddr3_init.h" +#include "mv_ddr4_training.h" +#include "mv_ddr4_mpr_pda_if.h" +#include "mv_ddr4_training_leveling.h" +#include "mv_ddr4_training_calibration.h" +#include "mv_ddr_regs.h" + +/* 1 for wa and sstl and pod to get the same vref value */ +u8 vref_calibration_wa = 1; + +static int a39x_z1_config(u32 dev_num); + +/* vref values for vcommon */ +static u16 vref_val[] = { + 746, + 654, + 671, + 686, + 701, + 713, + 725, + 736 +}; + +static u32 mv_ddr4_config_phy_vref_tap; + +/* configure DDR4 SDRAM */ +int mv_ddr4_sdram_config(u32 dev_num) +{ + /* TODO: zq params to be frequency dependent */ + u32 zq_init = 1023; + u32 zq_oper = 511; + u32 zq_cs = 127; + u32 if_id; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + int status; + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + + /* dtype: 0x3 for DDR4, 0x1 for DDR3 */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, SDRAM_CFG_REG, + (0x1 << 14) | (0x1 << 20), (0x1 << 14) | (0x1 << 20)); + if (status != MV_OK) + return status; + + /* cpm */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DRAM_PINS_MUX_REG, + 0x2, 0x3); + if (status != MV_OK) + return status; + + /* + * set t_dllk to 1024 to the maximum of minimum for high speed bin + * TODO: may change for future speed bins + */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DRAM_DLL_TIMING_REG, + 0x400, 0xfff); + if (status != MV_OK) + return status; + + /* set zq_init */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DRAM_ZQ_INIT_TIMIMG_REG, + zq_init, 0xfff); + if (status != MV_OK) + return status; + + /* set zq_oper */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DRAM_ZQ_TIMING_REG, + zq_oper, 0x7ff); + if (status != MV_OK) + return status; + + /* set zq_cs */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DRAM_ZQ_TIMING_REG, + zq_cs << 16, 0x3ff0000); + if (status != MV_OK) + return status; + + /* + * set registered dimm to unbuffered dimm + * TODO: support registered dimm + */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, SDRAM_CFG_REG, + 0x0, 0x1 << 17); + if (status != MV_OK) + return status; + } + + a39x_z1_config(dev_num); + + return MV_OK; +} + +u16 mv_ddr4_rtt_nom_to_odt(u16 rtt_nom) +{ + u8 odt; + + if (rtt_nom == 0) + odt = 0xff; + else if (rtt_nom == (1 << 8)) + odt = 60; /* 240 / 4 */ + else if (rtt_nom == (2 << 8)) + odt = 120; /* 240 / 2 */ + else if (rtt_nom == (3 << 8)) + odt = 40; /* 240 / 6 */ + else if (rtt_nom == (4 << 8)) + odt = 240; /* 240 / 1 */ + else if (rtt_nom == (5 << 8)) + odt = 48; /* 240 / 5 */ + else if (rtt_nom == (6 << 8)) + odt = 80; /* 240 / 3 */ + else if (rtt_nom == (7 << 8)) + odt = 34; /* 240 / 7 */ + else + odt = 1; + + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("mv_ddr4_rtt_nom_to_odt: rtt_nom = %d, odt = %d\n", rtt_nom, odt)); + + return odt; +} + +u16 mv_ddr4_rtt_wr_to_odt(u16 rtt_wr) +{ + u8 odt; + + if (rtt_wr == 0) + odt = 0xff; + else if (rtt_wr == (1 << 9)) + odt = 120; /* 240 / 2 */ + else if (rtt_wr == (2 << 9)) + odt = 240; /* 240 / 1 */ + else + odt = 1; + + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("mv_ddr4_rtt_wr_to_odt rtt_wr = %d, odt = %d\n", rtt_wr, odt)); + + return odt; +} + +static u32 mv_ddr4_rx_odt_get(void) +{ + u16 odt = odt_intercept[(int)g_zpodt_data / 8] - (g_zpodt_data * odt_slope[(int)g_zpodt_data / 8]) / 100; + u16 rtt; + + if (g_odt_config & 0xf) { + rtt = mv_ddr4_rtt_nom_to_odt(g_rtt_nom); + odt = (odt * rtt) / (odt + rtt); + } + + return odt; +} + +static u8 mv_ddr4_vcommon_to_vref(u16 vcommon) +{ + u8 vref_tap; + + if ((vcommon > 600) && (vcommon <= 662)) { + vref_tap = 1; + } else if ((vcommon > 662) && (vcommon <= 679)) { + vref_tap = 2; + } else if ((vcommon > 679) && (vcommon <= 693)) { + vref_tap = 3; + } else if ((vcommon > 693) && (vcommon <= 707)) { + vref_tap = 4; + } else if ((vcommon > 707) && (vcommon <= 719)) { + vref_tap = 5; + } else if ((vcommon > 719) && (vcommon <= 725)) { + vref_tap = 6; + } else if ((vcommon > 725) && (vcommon <= 731)) { + vref_tap = 7; + } else if ((vcommon > 731) && (vcommon <= 800)) { + vref_tap = 0; + } else if (vcommon > 800) { + vref_tap = 0; + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_vcommon_to_vref: warning: vcommon value too high: %d\n", vcommon)); + } else if (vcommon < 600) { + vref_tap = 1; + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_vcommon_to_vref: warning: vcommon value too low: %d\n", vcommon)); + } else { + vref_tap = 1; + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_vcommon_to_vref: warning: vcommon out of range: %d\n", vcommon)); + } + + return vref_tap; +} + +/* configure phy */ +int mv_ddr4_phy_config(u32 dev_num) +{ + u8 cs, i, pod_val; + u32 upper_pcal, left_pcal, upper_ncal; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + /* design GL params to be set outside */ + u32 ron = 34; /* dic - rzq / 6 or rzq / 7 */ + u32 rodt = mv_ddr4_rx_odt_get(); /* effective odt per DGL */ + u32 vcommon = (1000 * (ron + rodt / 2)) / (ron + rodt); + u32 vref_idx; + u8 rc_tap; + u8 subphy_max = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); + int status; + + mv_ddr4_config_phy_vref_tap = mv_ddr4_vcommon_to_vref(vcommon); + + /* change calculation for 1GHz frequency */ + if (tm->interface_params[0].memory_freq == MV_DDR_FREQ_1000) + mv_ddr4_config_phy_vref_tap += 2; + + vref_idx = (mv_ddr4_config_phy_vref_tap < 8) ? mv_ddr4_config_phy_vref_tap : 0; + rc_tap = (430 * (vref_val[vref_idx] - vcommon)) / 1000 + 33; + /* 0x1 for pod mode */ + pod_val = (vref_calibration_wa == 1) ? 0x0 : 0x1; + upper_pcal = pod_val; + left_pcal = pod_val; + upper_ncal = 0; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_DATA, TEST_ADLL_PHY_REG, pod_val); + if (status != MV_OK) + return status; + + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, GP_RSVD0_REG, + (upper_pcal << 12) | (left_pcal << 6) | (upper_ncal << 5), 0x1060); + if (status != MV_OK) + return status; + + /* + * phy register 0xbf, bit 0 - configure to pod mode (0x1) + * phy register 0xa8, bits [6:4] - configure to clamp (0x0) + * subphys (broadcast) register 0xa8, bits [2:0] - configure to int ref m (0x4), + * TODO: need to write it to control subphys too + * vref tap - configure to SSTL calibration only (4) + * enhanced vref value - set to no clamp (0) + */ + for (i = 0; i < subphy_max; i++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, i); + ddr3_tip_bus_read_modify_write(dev_num, ACCESS_TYPE_UNICAST, 0, i, DDR_PHY_DATA, PAD_CFG_PHY_REG, + (0 << 4) | 4, ((0x7 << 4) | 0x7)); + } + + for (i = 0; i < 3; i++) + ddr3_tip_bus_read_modify_write(dev_num, ACCESS_TYPE_UNICAST, 0, i, DDR_PHY_CONTROL, PAD_CFG_PHY_REG, + (0 << 4) | 4 , ((0x7 << 4) | 0x7)); + + /* phy register 0xa4, bits [13:7] - configure to 0x7c zpri /znri */ + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_DATA, PAD_ZRI_CAL_PHY_REG, + ((0x7f & g_zpri_data) << 7) | (0x7f & g_znri_data)); + if (status != MV_OK) + return status; + + /* + * phy register 0xa6, bits [5:0] - configure to znodt (0x0) + * phy register 0xa6 bits [11:6] - configure to zpodt (60Ohm, 0x1d) + */ + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_DATA, PAD_ODT_CAL_PHY_REG, g_zpodt_data << 6); + if (status != MV_OK) + return status; + + /* update for all active cs */ + for (cs = 0; cs < MAX_CS_NUM; cs++) { + /* + * writes to present cs only + * phy register 0xdb, bits [5:0] - configure to rcvr cal for 50% duty cycle, + * broadcast to all bits cs0 (0x26) + */ + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_DATA, VREF_BCAST_PHY_REG(cs), rc_tap); + if (status != MV_OK) + return status; + } + + return MV_OK; +} + +/* + * configure sstl for manual calibration and pod for automatic one + * assumes subphy configured to pod ealier + */ +int mv_ddr4_calibration_adjust(u32 dev_num, u8 vref_en, u8 pod_only) +{ + u8 i, if_id = 0; + u32 read_data[MAX_INTERFACE_NUM]; + u32 ncal = 0, pcal = 0; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + int status = MV_OK; + u8 subphy_max = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); + u8 vref_tap = mv_ddr4_config_phy_vref_tap; + u32 vref_idx = (vref_tap < 8) ? vref_tap : 0; + + if (vref_calibration_wa == 0) + return mv_ddr4_calibration_validate(dev_num); + + if (vref_en == 1) { + /* enhanced vref value set to no clamp (0) */ + for (i = 0; i < subphy_max; i++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, i); + ddr3_tip_bus_read_modify_write(dev_num, ACCESS_TYPE_UNICAST, 0, i, DDR_PHY_DATA, + PAD_CFG_PHY_REG, (0 << 4) | vref_idx, ((0x7 << 4) | 0x7)); + } + + for (i = 0; i < 3; i++) + ddr3_tip_bus_read_modify_write(dev_num, ACCESS_TYPE_UNICAST, 0, i, DDR_PHY_CONTROL, + PAD_CFG_PHY_REG, (0 << 4) | vref_idx, ((0x7 << 4) | 0x7)); + } + + /* pad calibration control - enable */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, MAIN_PADS_CAL_MACH_CTRL_REG, + (calibration_update_control << 3) | 0x1, (0x3 << 3) | 0x1); + if (status != MV_OK) + return status; + + /* calibration update external */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, + MAIN_PADS_CAL_MACH_CTRL_REG, 0x2 << 3, 0x3 << 3); + if (status != MV_OK) + return status; + + /* poll init calibration done */ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x80000000, 0x80000000, + MAIN_PADS_CAL_MACH_CTRL_REG, MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_calibration_adjust: calibration polling failed (0)\n")); + + /* poll calibration propogated to io */ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x3ffffff, 0x3ffffff, 0x1674, + MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_calibration_adjust: calibration polling failed (1)\n")); + + mdelay(10); /* TODO: check it */ + + /* disable dynamic */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, MAIN_PADS_CAL_MACH_CTRL_REG, 0, 0x1); + if (status != MV_OK) + return status; + + /* poll initial calibration done*/ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x80000000, 0x80000000, + MAIN_PADS_CAL_MACH_CTRL_REG, MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_calibration_adjust: calibration polling failed (2)\n")); + + /* poll calibration propogated to io */ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x3ffffff, 0x3ffffff, 0x1674, + MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_calibration_adjust: calibration polling failed (3)\n")); + + mdelay(10); /* TODO: check why polling insufficient */ + + /* read calibration value and set it manually */ + status = ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1dc8, read_data, MASK_ALL_BITS); + if (status != MV_OK) + return status; + + ncal = (read_data[if_id] & (0x3f << 10)) >> 10; + pcal = (read_data[if_id] & (0x3f << 4)) >> 4; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("mv_ddr4_calibration_adjust: sstl pcal = 0x%x, ncal = 0x%x\n", + pcal, ncal)); + if ((ncal >= 56) || (ncal <= 6) || (pcal >= 59) || (pcal <= 7)) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_calibration_adjust: error: sstl pcal = 0x%x, ncal = 0x%x out of range\n", + pcal, ncal)); + status = MV_FAIL; + } + + if (pod_only == 0) { + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1dc8, 0x1 << 3, 0x1 << 3); + if (status != MV_OK) + return status; + + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1dc8, + (ncal << 22) | (pcal << 16), (0x3f << 22) | (0x3f << 16)); + if (status != MV_OK) + return status; + + /* configure to pod mode (0x1) */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + GP_RSVD0_REG, + (0x1 << 12) | (0x1 << 6) | (0x1 << 5), 0x1060); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_DATA, TEST_ADLL_PHY_REG, 0x1); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_CONTROL, TEST_ADLL_PHY_REG, 0x1); + if (status != MV_OK) + return status; + + /* pad calibration control - enable */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, MAIN_PADS_CAL_MACH_CTRL_REG, + 0x1, 0x1); + if (status != MV_OK) + return status; + + /* poll initial calibration done*/ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x80000000, 0x80000000, + MAIN_PADS_CAL_MACH_CTRL_REG, MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_calibration_adjust: calibration polling failed (4)\n")); + } + + /* calibration update internal */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, MAIN_PADS_CAL_MACH_CTRL_REG, + calibration_update_control << 3, 0x3 << 3); + if (status != MV_OK) + return status; + + /* vertical */ + status = ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x14c8, read_data, MASK_ALL_BITS); + if (status != MV_OK) + return status; + ncal = (read_data[if_id] & (0x3f << 10)) >> 10; + pcal = (read_data[if_id] & (0x3f << 4)) >> 4; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("mv_ddr4_calibration_adjust: pod-v pcal = 0x%x, ncal = 0x%x\n", + pcal, ncal)); + if ((ncal >= 56) || (ncal <= 6) || (pcal >= 59) || (pcal <= 7)) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_calibration_adjust: error: pod-v pcal = 0x%x, ncal = 0x%x out of range\n", + pcal, ncal)); + status = MV_FAIL; + } + + /* horizontal */ + status = ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x17c8, read_data, MASK_ALL_BITS); + if (status != MV_OK) + return status; + ncal = (read_data[if_id] & (0x3f << 10)) >> 10; + pcal = (read_data[if_id] & (0x3F << 4)) >> 4; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("mv_ddr4_calibration_adjust: pod-h pcal = 0x%x, ncal = 0x%x\n", + pcal, ncal)); + if ((ncal >= 56) || (ncal <= 6) || (pcal >= 59) || (pcal <= 7)) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("mv_ddr4_calibration_adjust: error: pod-h pcal = 0x%x, ncal = 0x%x out of range\n", + pcal, ncal)); + status = MV_FAIL; + } + /* pad calibration control - disable */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, MAIN_PADS_CAL_MACH_CTRL_REG, + (calibration_update_control << 3) | 0x0, (0x3 << 3) | 0x1); + if (status != MV_OK) + return status; + + return status; +} + +static int a39x_z1_config(u32 dev_num) +{ + u32 if_id; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + int status; + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + /* + * xbar split bypass - dlb is off, + * when enabled, set to 0x1 + */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1424, 0x0 << 3, 0x1 << 3); + if (status != MV_OK) + return status; + + /* auto power save option */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1474, 0x0, 0xffffffff); + if (status != MV_OK) + return status; + } + + return MV_OK; +} + +int mv_ddr4_training_main_flow(u32 dev_num) +{ + int status = MV_OK; + u16 pbs_tap_factor[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS] = {0}; + + if (mask_tune_func & RECEIVER_CALIBRATION_MASK_BIT) { + training_stage = RECEIVER_CALIBRATION; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("RECEIVER_CALIBRATION_MASK_BIT #%d\n", effective_cs)); + status = mv_ddr4_receiver_calibration(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (status != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_receiver_calibrate failure\n")); + if (debug_mode == 0) + return status; + } + } + + if (mask_tune_func & WL_PHASE_CORRECTION_MASK_BIT) { + training_stage = WL_PHASE_CORRECTION; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("WL_PHASE_CORRECTION_MASK_BIT #%d\n", effective_cs)); + status = mv_ddr4_dynamic_wl_supp(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (status != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_dynamic_wl_supp failure\n")); + if (debug_mode == 0) + return status; + } + } + + if (mask_tune_func & DQ_VREF_CALIBRATION_MASK_BIT) { + training_stage = DQ_VREF_CALIBRATION; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("DQ_VREF_CALIBRATION_MASK_BIT #%d\n", effective_cs)); + status = mv_ddr4_dq_vref_calibration(dev_num, pbs_tap_factor); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (status != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_dq_vref_calibrate failure\n")); + if (debug_mode == 0) + return status; + } + } + + if (mask_tune_func & DM_TUNING_MASK_BIT) { + training_stage = DM_TUNING; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("DM_TUNING_MASK_BIT #%d\n", effective_cs)); + status = mv_ddr4_dm_tuning(effective_cs, pbs_tap_factor); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (status != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_dm_tuning failure\n")); + if (debug_mode == 0) + return status; + } + } + + if (mask_tune_func & DQ_MAPPING_MASK_BIT) { + training_stage = DQ_MAPPING; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("DQ_MAPPING_MASK_BIT\n")); + status = mv_ddr4_dq_pins_mapping(dev_num); + if (is_reg_dump != 0) + ddr3_tip_reg_dump(dev_num); + if (status != MV_OK) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("mv_ddr4_dq_pins_mapping failure\n")); + if (debug_mode == 0) + return status; + } + } + + return status; +} +#endif /* CONFIG_DDR4 */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_training.h b/drivers/ddr/marvell/a38x/mv_ddr4_training.h new file mode 100644 index 0000000000..fa2e9a0877 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_training.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#ifndef _MV_DDR4_TRAINING_H +#define _MV_DDR4_TRAINING_H + +#include "ddr3_training_ip.h" + +/* configure DDR4 SDRAM */ +int mv_ddr4_sdram_config(u32 dev_num); + +/* configure phy */ +int mv_ddr4_phy_config(u32 dev_num); + +/* + * configure sstl for manual calibration and pod for automatic one + * assumes subphy configured to pod ealier + */ +int mv_ddr4_calibration_adjust(u32 dev_num, u8 vref_en, u8 pod_only); + +/* + * validates calibration values + * soc dependent; TODO: check it + */ +int mv_ddr4_calibration_validate(u32 dev_num); + +u16 mv_ddr4_rtt_nom_to_odt(u16 rtt_nom); +u16 mv_ddr4_rtt_wr_to_odt(u16 rtt_wr); + +#endif /* _MV_DDR4_TRAINING_H */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c b/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c new file mode 100644 index 0000000000..31b6209416 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c @@ -0,0 +1,2336 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#if defined(CONFIG_DDR4) + +/* DESCRIPTION: DDR4 Receiver and DQVref Calibration */ + +#include "ddr3_init.h" +#include "mv_ddr4_training_calibration.h" +#include "mv_ddr4_training.h" +#include "mv_ddr4_mpr_pda_if.h" +#include "mv_ddr_training_db.h" +#include "mv_ddr_regs.h" + +#define RX_DIR 0 +#define TX_DIR 1 +#define MAX_DIR_TYPES 2 + +#define RECEIVER_DC_STEP_SIZE 3 +#define RECEIVER_DC_MIN_RANGE 0 +#define RECEIVER_DC_MAX_RANGE 63 +#define RECEIVER_DC_MAX_COUNT (((RECEIVER_DC_MAX_RANGE - RECEIVER_DC_MIN_RANGE) / RECEIVER_DC_STEP_SIZE) + 1) + +#define PBS_VAL_FACTOR 1000 +#define MV_DDR_VW_TX_NOISE_FILTER 8 /* adlls */ + +u8 dq_vref_vec[MAX_BUS_NUM]; /* stability support */ +u8 rx_eye_hi_lvl[MAX_BUS_NUM]; /* rx adjust support */ +u8 rx_eye_lo_lvl[MAX_BUS_NUM]; /* rx adjust support */ + +static u8 pbs_max = 31; +static u8 vdq_tv; /* vref value for dq vref calibration */ +static u8 duty_cycle; /* duty cycle value for receiver calibration */ +static u8 rx_vw_pos[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +static u8 patterns_byte_status[MAX_INTERFACE_NUM][MAX_BUS_NUM]; +static const char *str_dir[MAX_DIR_TYPES] = {"read", "write"}; + +static u8 center_low_element_get(u8 dir, u8 pbs_element, u16 lambda, u8 pbs_max_val) +{ + u8 result; + + if (dir == RX_DIR) + result = pbs_element * lambda / PBS_VAL_FACTOR; + else + result = (pbs_max_val - pbs_element) * lambda / PBS_VAL_FACTOR; + + return result; +} + +static u8 center_high_element_get(u8 dir, u8 pbs_element, u16 lambda, u8 pbs_max_val) +{ + u8 result; + + if (dir == RX_DIR) + result = (pbs_max_val - pbs_element) * lambda / PBS_VAL_FACTOR; + else + result = pbs_element * lambda / PBS_VAL_FACTOR; + + return result; +} + +static int mv_ddr4_centralization(u8 dev_num, u16 (*lambda)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS], u8 (*copt)[MAX_BUS_NUM], + u8 (*pbs_result)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS], u8 (*vw_size)[MAX_BUS_NUM], + u8 mode, u16 param0, u8 param1); +static int mv_ddr4_dqs_reposition(u8 dir, u16 *lambda, u8 *pbs_result, char delta, u8 *copt, u8 *dqs_pbs); +static int mv_ddr4_copt_get(u8 dir, u16 *lambda, u8 *vw_l, u8 *vw_h, u8 *pbs_result, u8 *copt); +static int mv_ddr4_center_of_mass_calc(u8 dev_num, u8 if_id, u8 subphy_num, u8 mode, u8 *vw_l, u8 *vw_h, u8 *vw_v, + u8 vw_num, u8 *v_opt, u8 *t_opt); +static int mv_ddr4_tap_tuning(u8 dev_num, u16 (*pbs_tap_factor)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS], u8 mode); + +/* dq vref calibration flow */ +int mv_ddr4_dq_vref_calibration(u8 dev_num, u16 (*pbs_tap_factor)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS]) +{ + u32 if_id, subphy_num; + u32 vref_idx, dq_idx, pad_num = 0; + u8 dq_vref_start_win[MAX_INTERFACE_NUM][MAX_BUS_NUM][MV_DDR4_VREF_MAX_COUNT]; + u8 dq_vref_end_win[MAX_INTERFACE_NUM][MAX_BUS_NUM][MV_DDR4_VREF_MAX_COUNT]; + u8 valid_win_size[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 c_opt_per_bus[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 valid_vref_cnt[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 valid_vref_ptr[MAX_INTERFACE_NUM][MAX_BUS_NUM][MV_DDR4_VREF_MAX_COUNT]; + u8 center_adll[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 center_vref[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 pbs_res_per_bus[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + u16 vref_avg, vref_subphy_num; + int vref_tap_idx; + int vref_range_min; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + enum mv_ddr4_vref_subphy_cal_state all_subphys_state = MV_DDR4_VREF_SUBPHY_CAL_ABOVE; + int tap_tune_passed = 0; + enum mv_ddr4_vref_tap_state vref_tap_set_state = MV_DDR4_VREF_TAP_START; + enum hws_result *flow_result = ddr3_tip_get_result_ptr(training_stage); + u8 subphy_max = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); + enum mv_ddr4_vref_subphy_cal_state vref_state_per_subphy[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + int status; + static u8 vref_byte_status[MAX_INTERFACE_NUM][MAX_BUS_NUM][MV_DDR4_VREF_MAX_RANGE]; + + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, ("Starting ddr4 dq vref calibration training stage\n")); + + vdq_tv = 0; + duty_cycle = 0; + + /* reset valid vref counter per if and subphy */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + for (subphy_num = 0; subphy_num < MAX_BUS_NUM; subphy_num++) { + valid_vref_cnt[if_id][subphy_num] = 0; + vref_state_per_subphy[if_id][subphy_num] = MV_DDR4_VREF_SUBPHY_CAL_ABOVE; + } + } + + if (mv_ddr4_tap_tuning(dev_num, pbs_tap_factor, TX_DIR) == MV_OK) + tap_tune_passed = 1; + + /* place dram to vref training mode */ + mv_ddr4_vref_training_mode_ctrl(dev_num, 0, ACCESS_TYPE_MULTICAST, 1); + + /* main loop for 2d scan (low_to_high voltage scan) */ + vref_tap_idx = MV_DDR4_VREF_MAX_RANGE; + vref_range_min = MV_DDR4_VREF_MIN_RANGE; + + if (vref_range_min < MV_DDR4_VREF_STEP_SIZE) + vref_range_min = MV_DDR4_VREF_STEP_SIZE; + + /* clean vref status array */ + memset(vref_byte_status, BYTE_NOT_DEFINED, sizeof(vref_byte_status)); + + for (vref_tap_idx = MV_DDR4_VREF_MAX_RANGE; (vref_tap_idx >= vref_range_min) && + (all_subphys_state != MV_DDR4_VREF_SUBPHY_CAL_UNDER); + vref_tap_idx -= MV_DDR4_VREF_STEP_SIZE) { + /* set new vref training value in dram */ + mv_ddr4_vref_tap_set(dev_num, 0, ACCESS_TYPE_MULTICAST, vref_tap_idx, vref_tap_set_state); + + if (tap_tune_passed == 0) { + if (mv_ddr4_tap_tuning(dev_num, pbs_tap_factor, TX_DIR) == MV_OK) + tap_tune_passed = 1; + else + continue; + } + + if (mv_ddr4_centralization(dev_num, pbs_tap_factor, c_opt_per_bus, pbs_res_per_bus, + valid_win_size, TX_DIR, vref_tap_idx, 0) != MV_OK) { + DEBUG_CALIBRATION(DEBUG_LEVEL_ERROR, + ("error: %s: ddr4 centralization failed (dq vref tap index %d)!!!\n", + __func__, vref_tap_idx)); + continue; + } + + /* go over all results and find out the vref start and end window */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + if (valid_win_size[if_id][subphy_num] > MV_DDR_VW_TX_NOISE_FILTER) { + if (vref_state_per_subphy[if_id][subphy_num] == MV_DDR4_VREF_SUBPHY_CAL_UNDER) + DEBUG_CALIBRATION(DEBUG_LEVEL_ERROR, + ("warning: %s: subphy %d vref tap %d voltage noise\n", + __func__, subphy_num, vref_tap_idx)); + /* window is valid; keep current vref_tap_idx value and increment counter */ + vref_idx = valid_vref_cnt[if_id][subphy_num]; + valid_vref_ptr[if_id][subphy_num][vref_idx] = vref_tap_idx; + valid_vref_cnt[if_id][subphy_num]++; + + /* set 0 for possible negative values */ + vref_byte_status[if_id][subphy_num][vref_idx] |= + patterns_byte_status[if_id][subphy_num]; + dq_vref_start_win[if_id][subphy_num][vref_idx] = + c_opt_per_bus[if_id][subphy_num] + 1 - + valid_win_size[if_id][subphy_num] / 2; + dq_vref_start_win[if_id][subphy_num][vref_idx] = + (valid_win_size[if_id][subphy_num] % 2 == 0) ? + dq_vref_start_win[if_id][subphy_num][vref_idx] : + dq_vref_start_win[if_id][subphy_num][vref_idx] - 1; + dq_vref_end_win[if_id][subphy_num][vref_idx] = + c_opt_per_bus[if_id][subphy_num] + + valid_win_size[if_id][subphy_num] / 2; + vref_state_per_subphy[if_id][subphy_num] = MV_DDR4_VREF_SUBPHY_CAL_INSIDE; + } else if (vref_state_per_subphy[if_id][subphy_num] == MV_DDR4_VREF_SUBPHY_CAL_INSIDE) { + vref_state_per_subphy[if_id][subphy_num] = MV_DDR4_VREF_SUBPHY_CAL_UNDER; + } + } /* subphy */ + } /* if */ + + /* check all subphys are in under state */ + all_subphys_state = MV_DDR4_VREF_SUBPHY_CAL_UNDER; + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + if (vref_state_per_subphy[if_id][subphy_num] != MV_DDR4_VREF_SUBPHY_CAL_UNDER) + all_subphys_state = MV_DDR4_VREF_SUBPHY_CAL_INSIDE; + } + } + } + + if (tap_tune_passed == 0) { + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("%s: tap tune not passed on any dq_vref value\n", __func__)); + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + /* report fail for all active interfaces; multi-interface support - tbd */ + flow_result[if_id] = TEST_FAILED; + } + + return MV_FAIL; + } + + /* close vref range */ + mv_ddr4_vref_tap_set(dev_num, 0, ACCESS_TYPE_MULTICAST, vref_tap_idx, MV_DDR4_VREF_TAP_END); + + /* + * find out the results with the mixed and low states and move the low state 64 adlls in case + * the center of the ui is smaller than 31 + */ + for (vref_idx = 0; vref_idx < MV_DDR4_VREF_MAX_RANGE; vref_idx++) { + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + if (((vref_byte_status[if_id][subphy_num][vref_idx]) & + (BYTE_HOMOGENEOUS_LOW | BYTE_SPLIT_OUT_MIX)) == + (BYTE_HOMOGENEOUS_LOW | BYTE_SPLIT_OUT_MIX)) { + if ((dq_vref_start_win[if_id][subphy_num][vref_idx] + + dq_vref_end_win[if_id][subphy_num][vref_idx]) / 2 <= 31) { + dq_vref_start_win[if_id][subphy_num][vref_idx] += 64; + dq_vref_end_win[if_id][subphy_num][vref_idx] += 64; + DEBUG_CALIBRATION + (DEBUG_LEVEL_TRACE, + ("%s vref_idx %d if %d subphy %d added 64 adlls to window\n", + __func__, valid_vref_ptr[if_id][subphy_num][vref_idx], + if_id, subphy_num)); + } + } + } + } + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("calculating center of mass for subphy %d, valid window size %d\n", + subphy_num, valid_win_size[if_id][subphy_num])); + if (valid_vref_cnt[if_id][subphy_num] > 0) { + /* calculate center of mass sampling point (t, v) for each subphy */ + status = mv_ddr4_center_of_mass_calc(dev_num, if_id, subphy_num, TX_DIR, + dq_vref_start_win[if_id][subphy_num], + dq_vref_end_win[if_id][subphy_num], + valid_vref_ptr[if_id][subphy_num], + valid_vref_cnt[if_id][subphy_num], + ¢er_vref[if_id][subphy_num], + ¢er_adll[if_id][subphy_num]); + if (status != MV_OK) + return status; + + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("center of mass results: vref %d, adll %d\n", + center_vref[if_id][subphy_num], center_adll[if_id][subphy_num])); + } else { + DEBUG_CALIBRATION(DEBUG_LEVEL_ERROR, + ("%s subphy %d no vref results to calculate the center of mass\n", + __func__, subphy_num)); + status = MV_ERROR; + return status; + } + } + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + vref_avg = 0; + vref_subphy_num = 0; + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + vref_avg += center_vref[if_id][subphy_num]; + dq_vref_vec[subphy_num] = center_vref[if_id][subphy_num]; + vref_subphy_num++; + } + + mv_ddr4_vref_tap_set(dev_num, if_id, ACCESS_TYPE_UNICAST, + vref_avg / vref_subphy_num, MV_DDR4_VREF_TAP_START); + mv_ddr4_vref_tap_set(dev_num, if_id, ACCESS_TYPE_UNICAST, + vref_avg / vref_subphy_num, MV_DDR4_VREF_TAP_END); + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, ("final vref average %d\n", vref_avg / vref_subphy_num)); + /* run centralization again with optimal vref to update global structures */ + mv_ddr4_centralization(dev_num, pbs_tap_factor, c_opt_per_bus, pbs_res_per_bus, valid_win_size, + TX_DIR, vref_avg / vref_subphy_num, duty_cycle); + } + + /* return dram from vref DRAM from vref training mode */ + mv_ddr4_vref_training_mode_ctrl(dev_num, 0, ACCESS_TYPE_MULTICAST, 0); + + /* dqs tx reposition calculation */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + pad_num = dq_map_table[dq_idx + + subphy_num * BUS_WIDTH_IN_BITS + + if_id * BUS_WIDTH_IN_BITS * subphy_max]; + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, + 0x10 + pad_num + effective_cs * 0x10, + pbs_res_per_bus[if_id][subphy_num][dq_idx]); + if (status != MV_OK) + return status; + } + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, + CTX_PHY_REG(effective_cs), + center_adll[if_id][subphy_num] % 64); + if (status != MV_OK) + return status; + } + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + /* report pass for all active interfaces; multi-interface support - tbd */ + flow_result[if_id] = TEST_SUCCESS; + } + + return MV_OK; +} + +/* centralization flow */ +static int mv_ddr4_centralization(u8 dev_num, u16 (*lambda)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS], u8 (*copt)[MAX_BUS_NUM], + u8 (*pbs_result)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS], u8 (*vw_size)[MAX_BUS_NUM], + u8 mode, u16 param0, u8 param1) +{ +/* FIXME: remove the dependency in 64bit */ +#define MV_DDR_NUM_OF_CENTRAL_PATTERNS (PATTERN_KILLER_DQ7 - PATTERN_KILLER_DQ0 + 1) + static u8 subphy_end_win[MAX_DIR_TYPES][MAX_INTERFACE_NUM][MAX_BUS_NUM]; + static u8 subphy_start_win[MAX_DIR_TYPES][MAX_INTERFACE_NUM][MAX_BUS_NUM]; + static u8 final_start_win[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + static u8 final_end_win[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + enum hws_training_ip_stat training_result[MAX_INTERFACE_NUM]; + u32 if_id, subphy_num, pattern_id, pattern_loop_idx, bit_num; + u8 curr_start_win[BUS_WIDTH_IN_BITS]; + u8 curr_end_win[BUS_WIDTH_IN_BITS]; + static u8 start_win_db[MV_DDR_NUM_OF_CENTRAL_PATTERNS][MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + static u8 end_win_db[MV_DDR_NUM_OF_CENTRAL_PATTERNS][MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + u8 curr_win[BUS_WIDTH_IN_BITS]; + u8 opt_win, waste_win, start_win_skew, end_win_skew; + u8 final_subphy_win[MAX_INTERFACE_NUM][BUS_WIDTH_IN_BITS]; + enum hws_training_result result_type = RESULT_PER_BIT; + enum hws_dir direction; + enum hws_search_dir search_dir; + u32 *result[HWS_SEARCH_DIR_LIMIT]; + u32 max_win_size; + u8 curr_end_win_min, curr_start_win_max; + u32 cs_ena_reg_val[MAX_INTERFACE_NUM]; + u8 current_byte_status; + int status; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + u8 subphy_max = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + /* save current cs enable reg val */ + status = ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, DUAL_DUNIT_CFG_REG, + cs_ena_reg_val, MASK_ALL_BITS); + if (status != MV_OK) + return status; + + /* enable single cs */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DUAL_DUNIT_CFG_REG, + (0x1 << 3), (0x1 << 3)); + if (status != MV_OK) + return status; + } + + if (mode == TX_DIR) { + max_win_size = MAX_WINDOW_SIZE_TX; + direction = OPER_WRITE; + } else { + max_win_size = MAX_WINDOW_SIZE_RX; + direction = OPER_READ; + } + + /* database initialization */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + patterns_byte_status[if_id][subphy_num] = BYTE_NOT_DEFINED; + subphy_end_win[mode][if_id][subphy_num] = (max_win_size - 1); + subphy_start_win[mode][if_id][subphy_num] = 0; + vw_size[if_id][subphy_num] = (max_win_size - 1); + for (bit_num = 0; bit_num < BUS_WIDTH_IN_BITS; bit_num++) { + final_start_win[if_id][subphy_num][bit_num] = 0; + final_end_win[if_id][subphy_num][bit_num] = (max_win_size - 1); + if (mode == TX_DIR) + final_end_win[if_id][subphy_num][bit_num] = (2 * max_win_size - 1); + } + if (mode == TX_DIR) { + subphy_end_win[mode][if_id][subphy_num] = (2 * max_win_size - 1); + vw_size[if_id][subphy_num] = (2 * max_win_size - 1); + } + } + } + + /* main flow */ + /* FIXME: hard-coded "22" below for PATTERN_KILLER_DQ7_64 enum hws_pattern */ + for (pattern_id = PATTERN_KILLER_DQ0, pattern_loop_idx = 0; + pattern_id <= (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask) ? 22 : PATTERN_KILLER_DQ7); + pattern_id++, pattern_loop_idx++) { + ddr3_tip_ip_training_wrapper(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, result_type, HWS_CONTROL_ELEMENT_ADLL, + PARAM_NOT_CARE, direction, tm->if_act_mask, + 0x0, max_win_size - 1, max_win_size - 1, pattern_id, + EDGE_FPF, CS_SINGLE, PARAM_NOT_CARE, training_result); + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + /* + * in case the previous patterns found the current subphy as BYTE_NOT_DEFINED, + * continue to next subphy + */ + if ((patterns_byte_status[if_id][subphy_num] == BYTE_NOT_DEFINED) && + (pattern_id != PATTERN_KILLER_DQ0)) + continue; + /* + * in case the result of the current subphy is BYTE_NOT_DEFINED mark the + * pattern byte status as BYTE_NOT_DEFINED + */ + current_byte_status = mv_ddr_tip_sub_phy_byte_status_get(if_id, subphy_num); + if (current_byte_status == BYTE_NOT_DEFINED) { + DEBUG_DDR4_CENTRALIZATION + (DEBUG_LEVEL_INFO, + ("%s:%s: failed to lock subphy, pat %d if %d subphy %d\n", + __func__, str_dir[mode], pattern_id, if_id, subphy_num)); + patterns_byte_status[if_id][subphy_num] = BYTE_NOT_DEFINED; + /* update the valid window size which is return value from this function */ + vw_size[if_id][subphy_num] = 0; + /* continue to next subphy */ + continue; + } + + /* set the status of this byte */ + patterns_byte_status[if_id][subphy_num] |= current_byte_status; + for (search_dir = HWS_LOW2HIGH; search_dir <= HWS_HIGH2LOW; search_dir++) { + status = ddr3_tip_read_training_result(dev_num, if_id, ACCESS_TYPE_UNICAST, + subphy_num, ALL_BITS_PER_PUP, + search_dir, direction, result_type, + TRAINING_LOAD_OPERATION_UNLOAD, + CS_SINGLE, &result[search_dir], + 1, 0, 0); + if (status != MV_OK) + return status; + + DEBUG_DDR4_CENTRALIZATION + (DEBUG_LEVEL_INFO, + ("param0 %d param1 %d pat %d if %d subphy %d " + "regs: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + param0, param1, pattern_id, if_id, subphy_num, + result[search_dir][0], result[search_dir][1], + result[search_dir][2], result[search_dir][3], + result[search_dir][4], result[search_dir][5], + result[search_dir][6], result[search_dir][7])); + } + + for (bit_num = 0; bit_num < BUS_WIDTH_IN_BITS; bit_num++) { + /* read result success */ + DEBUG_DDR4_CENTRALIZATION( + DEBUG_LEVEL_INFO, + ("%s %s subphy locked, pat %d if %d subphy %d\n", + __func__, str_dir[mode], pattern_id, + if_id, subphy_num)); + start_win_db[pattern_loop_idx][if_id][subphy_num][bit_num] = + GET_TAP_RESULT(result[HWS_LOW2HIGH][bit_num], EDGE_1); + end_win_db[pattern_loop_idx][if_id][subphy_num][bit_num] = + GET_TAP_RESULT(result[HWS_HIGH2LOW][bit_num], EDGE_1); + } + } /* subphy */ + } /* interface */ + } /* pattern */ + + /* + * check if the current patterns subphys in all interfaces has mixed and low byte states + * in that case add 64 adlls to the low byte + */ + for (pattern_id = PATTERN_KILLER_DQ0, pattern_loop_idx = 0; + pattern_id <= (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask) ? 22 : PATTERN_KILLER_DQ7); + pattern_id++, pattern_loop_idx++) { + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + if (patterns_byte_status[if_id][subphy_num] == BYTE_NOT_DEFINED) + continue; + opt_win = 2 * max_win_size; /* initialize opt_win */ + /* in case this byte in the pattern is homogeneous low add 64 adlls to the byte */ + if (((patterns_byte_status[if_id][subphy_num]) & + (BYTE_HOMOGENEOUS_LOW | BYTE_SPLIT_OUT_MIX)) == + (BYTE_HOMOGENEOUS_LOW | BYTE_SPLIT_OUT_MIX)) { + for (bit_num = 0; bit_num < BUS_WIDTH_IN_BITS; bit_num++) { + if (start_win_db[pattern_loop_idx][if_id][subphy_num][bit_num] <= 31 && + end_win_db[pattern_loop_idx][if_id][subphy_num][bit_num] <= 31) { + start_win_db[pattern_loop_idx][if_id][subphy_num][bit_num] += + 64; + end_win_db[pattern_loop_idx][if_id][subphy_num][bit_num] += 64; + DEBUG_DDR4_CENTRALIZATION + (DEBUG_LEVEL_INFO, + ("%s %s pattern %d if %d subphy %d bit %d added 64 " + "adll\n", + __func__, str_dir[mode], pattern_id, if_id, + subphy_num, bit_num)); + } + } + } + + /* calculations for the current pattern per subphy */ + for (bit_num = 0; bit_num < BUS_WIDTH_IN_BITS; bit_num++) { + curr_win[bit_num] = end_win_db[pattern_loop_idx][if_id][subphy_num][bit_num] - + start_win_db[pattern_loop_idx][if_id][subphy_num][bit_num] + 1; + curr_start_win[bit_num] = + start_win_db[pattern_loop_idx][if_id][subphy_num][bit_num]; + curr_end_win[bit_num] = + end_win_db[pattern_loop_idx][if_id][subphy_num][bit_num]; + } + + opt_win = GET_MIN(opt_win, ddr3_tip_get_buf_min(curr_win)); + vw_size[if_id][subphy_num] = + GET_MIN(vw_size[if_id][subphy_num], ddr3_tip_get_buf_min(curr_win)); + + /* final subphy window length */ + final_subphy_win[if_id][subphy_num] = ddr3_tip_get_buf_min(curr_end_win) - + ddr3_tip_get_buf_max(curr_start_win) + 1; + waste_win = opt_win - final_subphy_win[if_id][subphy_num]; + start_win_skew = ddr3_tip_get_buf_max(curr_start_win) - + ddr3_tip_get_buf_min(curr_start_win); + end_win_skew = ddr3_tip_get_buf_max(curr_end_win) - + ddr3_tip_get_buf_min(curr_end_win); + + /* min/max updated with pattern change */ + curr_end_win_min = ddr3_tip_get_buf_min(curr_end_win); + curr_start_win_max = ddr3_tip_get_buf_max(curr_start_win); + subphy_end_win[mode][if_id][subphy_num] = + GET_MIN(subphy_end_win[mode][if_id][subphy_num], curr_end_win_min); + subphy_start_win[mode][if_id][subphy_num] = + GET_MAX(subphy_start_win[mode][if_id][subphy_num], curr_start_win_max); + DEBUG_DDR4_CENTRALIZATION + (DEBUG_LEVEL_TRACE, + ("%s, %s pat %d if %d subphy %d opt_win %d ", + __func__, str_dir[mode], pattern_id, if_id, subphy_num, opt_win)); + DEBUG_DDR4_CENTRALIZATION + (DEBUG_LEVEL_TRACE, + ("final_subphy_win %d waste_win %d " + "start_win_skew %d end_win_skew %d ", + final_subphy_win[if_id][subphy_num], + waste_win, start_win_skew, end_win_skew)); + DEBUG_DDR4_CENTRALIZATION(DEBUG_LEVEL_TRACE, + ("curr_start_win_max %d curr_end_win_min %d " + "subphy_start_win %d subphy_end_win %d\n", + curr_start_win_max, curr_end_win_min, + subphy_start_win[mode][if_id][subphy_num], + subphy_end_win[mode][if_id][subphy_num])); + + /* valid window */ + DEBUG_DDR4_CENTRALIZATION(DEBUG_LEVEL_TRACE, + ("valid window, pat %d if %d subphy %d\n", + pattern_id, if_id, subphy_num)); + for (bit_num = 0; bit_num < BUS_WIDTH_IN_BITS; bit_num++) { + final_start_win[if_id][subphy_num][bit_num] = + GET_MAX(final_start_win[if_id][subphy_num][bit_num], + curr_start_win[bit_num]); + final_end_win[if_id][subphy_num][bit_num] = + GET_MIN(final_end_win[if_id][subphy_num][bit_num], + curr_end_win[bit_num]); + } /* bit */ + } /* subphy */ + } /* if_id */ + } /* pattern */ + + /* calculate valid window for each subphy */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + if (patterns_byte_status[if_id][subphy_num] != BYTE_NOT_DEFINED) { + /* + * in case of bytes status which were found as mixed and low + * change the their status to be mixed only, due to the fact + * that we have already dealt with this bytes by adding 64 adlls + * to the low bytes + */ + if (patterns_byte_status[if_id][subphy_num] & + (BYTE_HOMOGENEOUS_LOW | BYTE_SPLIT_OUT_MIX)) + patterns_byte_status[if_id][subphy_num] = BYTE_SPLIT_OUT_MIX; + if (rx_vw_pos[if_id][subphy_num] == 0) /* rx_vw_pos is initialized during tap tune */ + pbs_max = 31 - 0xa; + else + pbs_max = 31; + + /* continue if locked */ + /*if (centralization_state[if_id][subphy_num] == 0) {*/ + status = mv_ddr4_copt_get(mode, lambda[if_id][subphy_num], + final_start_win[if_id][subphy_num], + final_end_win[if_id][subphy_num], + pbs_result[if_id][subphy_num], + &copt[if_id][subphy_num]); + + /* + * after copt the adll is moved to smaller value due to pbs compensation + * so the byte status might change, here we change the byte status to be + * homogeneous low in case the center of the ui after copt is moved below + * 31 adlls + */ + if(copt[if_id][subphy_num] <= 31) + patterns_byte_status[if_id][subphy_num] = BYTE_HOMOGENEOUS_LOW; + + DEBUG_DDR4_CENTRALIZATION + (DEBUG_LEVEL_INFO, + ("%s %s if %d subphy %d copt %d\n", + __func__, str_dir[mode], if_id, subphy_num, copt[if_id][subphy_num])); + + if (status != MV_OK) { + /* + * TODO: print out error message(s) only when all points fail + * as temporary solution, replaced ERROR to TRACE debug level + */ + DEBUG_DDR4_CENTRALIZATION + (DEBUG_LEVEL_TRACE, + ("%s %s copt calculation failed, " + "no valid window for subphy %d\n", + __func__, str_dir[mode], subphy_num)); + /* set the byte to 0 (fail) and clean the status (continue with algorithm) */ + vw_size[if_id][subphy_num] = 0; + status = MV_OK; + + if (debug_mode == 0) { + /* + * TODO: print out error message(s) only when all points fail + * as temporary solution, commented out debug level set to TRACE + */ + /* + * ddr3_hws_set_log_level(DEBUG_BLOCK_CALIBRATION, DEBUG_LEVEL_TRACE); + */ + /* open relevant log and run function again for debug */ + mv_ddr4_copt_get(mode, lambda[if_id][subphy_num], + final_start_win[if_id][subphy_num], + final_end_win[if_id][subphy_num], + pbs_result[if_id][subphy_num], + &copt[if_id][subphy_num]); + /* + * ddr3_hws_set_log_level(DEBUG_BLOCK_CALIBRATION, DEBUG_LEVEL_ERROR); + */ + } /* debug mode */ + } /* status */ + } /* byte not defined */ + } /* subphy */ + } /* if_id */ + + /* restore cs enable value*/ + for (if_id = 0; if_id < MAX_INTERFACE_NUM - 1; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, if_id, DUAL_DUNIT_CFG_REG, + cs_ena_reg_val[if_id], MASK_ALL_BITS); + if (status != MV_OK) + return status; + } + + return status; +} + +/* + * mv_ddr4_copt_get function + * inputs: + * dir - direction; 0 is for rx, 1 for tx + * lambda - a pointer to adll to pbs ration multiplied by PBS_VAL_FACTOR + * vw_l - a pointer to valid window low limit in adll taps + * vw_h - a pointer to valid window high limit in adll taps + * outputs: + * pbs_result - a pointer to pbs new delay value; the function's output + * copt - optimal center of subphy in adll taps + * The function assumes initial pbs tap value is zero. Otherwise, it requires logic + * getting pbs value per dq and setting pbs_taps_per_dq array. + * It provides with a solution for a single subphy (8 bits). + * The calling function is responsible for any additional pbs taps for dqs + */ +static int mv_ddr4_copt_get(u8 dir, u16 *lambda, u8 *vw_l, u8 *vw_h, u8 *pbs_result, u8 *copt) +{ + u8 center_per_dq[8]; + u8 center_zone_low[8] = {0}; + u8 center_zone_high[8] = {0}; + u8 ext_center_zone_low[8] = {0}; + u8 ext_center_zone_high[8] = {0}; + u8 pbs_taps_per_dq[8] = {0}; + u8 vw_per_dq[8]; + u8 vw_zone_low[8] = {0}; + u8 vw_zone_high[8] = {0}; + u8 margin_vw[8] = {0}; + u8 copt_val; + u8 dq_idx; + u8 center_zone_max_low = 0; + u8 center_zone_min_high = 128; + u8 vw_zone_max_low = 0; + u8 vw_zone_min_high = 128; + u8 min_vw = 63; /* minimum valid window between all bits */ + u8 center_low_el; + u8 center_high_el; + + /* lambda calculated as D * PBS_VALUE_FACTOR / d */ + //printf("Copt::Debug::\t"); + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + center_per_dq[dq_idx] = (vw_h[dq_idx] + vw_l[dq_idx]) / 2; + vw_per_dq[dq_idx] = 1 + (vw_h[dq_idx] - vw_l[dq_idx]); + if (min_vw > vw_per_dq[dq_idx]) + min_vw = vw_per_dq[dq_idx]; + } + + /* calculate center zone */ + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + center_low_el = center_low_element_get(dir, pbs_taps_per_dq[dq_idx], lambda[dq_idx], pbs_max); + if (center_per_dq[dq_idx] > center_low_el) + center_zone_low[dq_idx] = center_per_dq[dq_idx] - center_low_el; + center_high_el = center_high_element_get(dir, pbs_taps_per_dq[dq_idx], lambda[dq_idx], pbs_max); + center_zone_high[dq_idx] = center_per_dq[dq_idx] + center_high_el; + if (center_zone_max_low < center_zone_low[dq_idx]) + center_zone_max_low = center_zone_low[dq_idx]; + if (center_zone_min_high > center_zone_high[dq_idx]) + center_zone_min_high = center_zone_high[dq_idx]; + DEBUG_CALIBRATION(DEBUG_LEVEL_TRACE, + ("center: low %d, high %d, max_low %d, min_high %d\n", + center_zone_low[dq_idx], center_zone_high[dq_idx], + center_zone_max_low, center_zone_min_high)); + } + + if (center_zone_min_high >= center_zone_max_low) { /* center zone visib */ + /* set copt_val to high zone for rx */ + copt_val = (dir == RX_DIR) ? center_zone_max_low : center_zone_min_high; + *copt = copt_val; + + /* calculate additional pbs taps */ + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + if (dir == RX_DIR) + pbs_result[dq_idx] = (copt_val - center_per_dq[dq_idx]) * + PBS_VAL_FACTOR / lambda[dq_idx]; + else + pbs_result[dq_idx] = (center_per_dq[dq_idx] - copt_val) * + PBS_VAL_FACTOR / lambda[dq_idx]; + } + return MV_OK; + } else { /* not center zone visib */ + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + if ((center_zone_low[dq_idx] + 1) > (vw_per_dq[dq_idx] / 2 + vw_per_dq[dq_idx] % 2)) { + vw_zone_low[dq_idx] = (center_zone_low[dq_idx] + 1) - + (vw_per_dq[dq_idx] / 2 + vw_per_dq[dq_idx] % 2); + } else { + vw_zone_low[dq_idx] = 0; + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("dq_idx %d, center zone low %d, vw_l %d, vw_l %d\n", + dq_idx, center_zone_low[dq_idx], vw_l[dq_idx], vw_h[dq_idx])); + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("vw_l[%d], vw_lh[%d], lambda[%d]\n", + vw_l[dq_idx], vw_h[dq_idx], lambda[dq_idx])); + } + + vw_zone_high[dq_idx] = center_zone_high[dq_idx] + vw_per_dq[dq_idx] / 2; + + if (vw_zone_max_low < vw_zone_low[dq_idx]) + vw_zone_max_low = vw_zone_low[dq_idx]; + + if (vw_zone_min_high > vw_zone_high[dq_idx]) + vw_zone_min_high = vw_zone_high[dq_idx]; + + DEBUG_CALIBRATION(DEBUG_LEVEL_TRACE, + ("valid_window: low %d, high %d, max_low %d, min_high %d\n", + vw_zone_low[dq_idx], vw_zone_high[dq_idx], + vw_zone_max_low, vw_zone_min_high)); + } + + /* try to extend center zone */ + if (vw_zone_min_high >= vw_zone_max_low) { /* vw zone visib */ + center_zone_max_low = 0; + center_zone_min_high = 128; + + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + margin_vw[dq_idx] = vw_per_dq[dq_idx] - min_vw; + + if (center_zone_low[dq_idx] > margin_vw[dq_idx]) + ext_center_zone_low[dq_idx] = center_zone_low[dq_idx] - margin_vw[dq_idx]; + else + ext_center_zone_low[dq_idx] = 0; + + ext_center_zone_high[dq_idx] = center_zone_high[dq_idx] + margin_vw[dq_idx]; + + if (center_zone_max_low < ext_center_zone_low[dq_idx]) + center_zone_max_low = ext_center_zone_low[dq_idx]; + + if (center_zone_min_high > ext_center_zone_high[dq_idx]) + center_zone_min_high = ext_center_zone_high[dq_idx]; + + DEBUG_CALIBRATION(DEBUG_LEVEL_TRACE, + ("ext_center: low %d, high %d, max_low %d, min_high %d\n", + ext_center_zone_low[dq_idx], ext_center_zone_high[dq_idx], + center_zone_max_low, center_zone_min_high)); + } + + if (center_zone_min_high >= center_zone_max_low) { /* center zone visib */ + /* get optimal center position */ + copt_val = (dir == RX_DIR) ? center_zone_max_low : center_zone_min_high; + *copt = copt_val; + + /* calculate additional pbs taps */ + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + if (dir == 0) { + if (copt_val > center_per_dq[dq_idx]) + pbs_result[dq_idx] = (copt_val - center_per_dq[dq_idx]) * + PBS_VAL_FACTOR / lambda[dq_idx]; + else + pbs_result[dq_idx] = 0; + } else { + if (center_per_dq[dq_idx] > copt_val) + pbs_result[dq_idx] = (center_per_dq[dq_idx] - copt_val) * + PBS_VAL_FACTOR / lambda[dq_idx]; + else + pbs_result[dq_idx] = 0; + } + + if (pbs_result[dq_idx] > pbs_max) + pbs_result[dq_idx] = pbs_max; + } + + return MV_OK; + } else { /* not center zone visib */ + /* + * TODO: print out error message(s) only when all points fail + * as temporary solution, replaced ERROR to TRACE debug level + */ + DEBUG_DDR4_CENTRALIZATION(DEBUG_LEVEL_TRACE, + ("lambda: %d, %d, %d, %d, %d, %d, %d, %d\n", + lambda[0], lambda[1], lambda[2], lambda[3], + lambda[4], lambda[5], lambda[6], lambda[7])); + + DEBUG_DDR4_CENTRALIZATION(DEBUG_LEVEL_TRACE, + ("vw_h: %d, %d, %d, %d, %d, %d, %d, %d\n", + vw_h[0], vw_h[1], vw_h[2], vw_h[3], + vw_h[4], vw_h[5], vw_h[6], vw_h[7])); + + DEBUG_DDR4_CENTRALIZATION(DEBUG_LEVEL_TRACE, + ("vw_l: %d, %d, %d, %d, %d, %d, %d, %d\n", + vw_l[0], vw_l[1], vw_l[2], vw_l[3], + vw_l[4], vw_l[5], vw_l[6], vw_l[7])); + + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + DEBUG_DDR4_CENTRALIZATION(DEBUG_LEVEL_TRACE, + ("center: low %d, high %d, " + "max_low %d, min_high %d\n", + center_zone_low[dq_idx], center_zone_high[dq_idx], + center_zone_max_low, center_zone_min_high)); + + DEBUG_DDR4_CENTRALIZATION(DEBUG_LEVEL_TRACE, + ("valid_window: low %d, high %d, " + "max_low %d, min_high %d\n", + vw_zone_low[dq_idx], vw_zone_high[dq_idx], + vw_zone_max_low, vw_zone_min_high)); + + DEBUG_DDR4_CENTRALIZATION(DEBUG_LEVEL_TRACE, + ("ext_center: low %d, high %d, " + "max_low %d, min_high %d\n", + ext_center_zone_low[dq_idx], + ext_center_zone_high[dq_idx], + center_zone_max_low, center_zone_min_high)); + } + + return MV_FAIL; + } + } else { /* not vw zone visib; failed to find a single sample point */ + return MV_FAIL; + } + } + + return MV_OK; +} + +/* + * mv_ddr4_dqs_reposition function gets copt to align to and returns pbs value per bit + * parameters: + * dir - direction; 0 is for rx, 1 for tx + * lambda - a pointer to adll to pbs ration multiplied by PBS_VAL_FACTOR + * pbs_result - a pointer to pbs new delay value; the function's output + * delta - signed; possilbe values: +0xa, 0x0, -0xa; for rx can be only negative + * copt - optimal center of subphy in adll taps + * dqs_pbs - optimal pbs + * The function assumes initial pbs tap value is zero. Otherwise, it requires logic + * getting pbs value per dq and setting pbs_taps_per_dq array. + * It provides with a solution for a single subphy (8 bits). + * The calling function is responsible for any additional pbs taps for dqs + */ +static int mv_ddr4_dqs_reposition(u8 dir, u16 *lambda, u8 *pbs_result, char delta, u8 *copt, u8 *dqs_pbs) +{ + u8 dq_idx; + u32 pbs_max_val = 0; + u32 lambda_avg = 0; + + /* lambda calculated as D * X / d */ + for (dq_idx = 0; dq_idx < 8; dq_idx++) { + if (pbs_max_val < pbs_result[dq_idx]) + pbs_max_val = pbs_result[dq_idx]; + lambda_avg += lambda[dq_idx]; + } + + if (delta >= 0) + *dqs_pbs = (pbs_max_val + delta) / 2; + else /* dqs already 0xa */ + *dqs_pbs = pbs_max_val / 2; + + lambda_avg /= 8; + + /* change in dqs pbs value requires change in final copt position from mass center solution */ + if (dir == TX_DIR) { + /* for tx, additional pbs on dqs in opposite direction of adll */ + *copt = *copt + ((*dqs_pbs) * lambda_avg) / PBS_VAL_FACTOR; + } else { + /* for rx, additional pbs on dqs in same direction of adll */ + if (delta < 0) + *copt = *copt - ((*dqs_pbs + delta) * lambda_avg) / PBS_VAL_FACTOR; + else + *copt = *copt - (*dqs_pbs * lambda_avg) / PBS_VAL_FACTOR; + } + + return MV_OK; +} + +/* + * mv_ddr4_center_of_mass_calc function + * parameters: + * vw_l - a pointer to valid window low limit in adll taps + * vw_h - a pointer to valid window high limit in adll taps + * vw_v - a pointer to vref value matching vw_l/h arrays + * vw_num - number of valid windows (lenght vw_v vector) + * v_opt - optimal voltage value in vref taps + * t_opt - optimal adll value in adll taps + * This function solves 2D centroid equation (e.g., adll and vref axes) + * The function doesn't differentiate between byte and bit eyes + */ +static int mv_ddr4_center_of_mass_calc(u8 dev_num, u8 if_id, u8 subphy_num, u8 mode, u8 *vw_l, + u8 *vw_h, u8 *vw_v, u8 vw_num, u8 *v_opt, u8 *t_opt) +{ + u8 idx; + u8 edge_t[128], edge_v[128]; + u8 min_edge_t = 127, min_edge_v = 127; + int polygon_area = 0; + int t_opt_temp = 0, v_opt_temp = 0; + int vw_avg = 0, v_avg = 0; + int s0 = 0, s1 = 0, s2 = 0, slope = 1, r_sq = 0; + u32 d_min = 10000, reg_val = 0; + int status; + + /* + * reorder all polygon points counterclockwise + * get min value of each axis to shift to smaller calc value + */ + for (idx = 0; idx < vw_num; idx++) { + edge_t[idx] = vw_l[idx]; + edge_v[idx] = vw_v[idx]; + if (min_edge_v > vw_v[idx]) + min_edge_v = vw_v[idx]; + if (min_edge_t > vw_l[idx]) + min_edge_t = vw_l[idx]; + edge_t[vw_num * 2 - 1 - idx] = vw_h[idx]; + edge_v[vw_num * 2 - 1 - idx] = vw_v[idx]; + vw_avg += vw_h[idx] - vw_l[idx]; + v_avg += vw_v[idx]; + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("%s: if %d, byte %d, direction %d, vw_v %d, vw_l %d, vw_h %d\n", + __func__, if_id, subphy_num, mode, vw_v[idx], vw_l[idx], vw_h[idx])); + } + + vw_avg *= 1000 / vw_num; + v_avg /= vw_num; + for (idx = 0; idx < vw_num; idx++) { + s0 += (1000 * (vw_h[idx] - vw_l[idx]) - vw_avg) * (vw_v[idx] - v_avg); + s1 += (vw_v[idx] - v_avg) * (vw_v[idx] - v_avg); + s2 += (1000 * (vw_h[idx] - vw_l[idx]) - vw_avg) * (1000 * (vw_h[idx] - vw_l[idx]) - vw_avg); + } + r_sq = s0 * (s0 / s1); + r_sq /= (s2 / 1000); + slope = s0 / s1; + + /* idx n is equal to idx 0 */ + edge_t[vw_num * 2] = vw_l[0]; + edge_v[vw_num * 2] = vw_v[0]; + + /* calculate polygon area, a (may be negative) */ + for (idx = 0; idx < vw_num * 2; idx++) + polygon_area = polygon_area + + ((edge_t[idx] - min_edge_t)*(edge_v[idx + 1] - min_edge_v) - + (edge_t[idx + 1] - min_edge_t)*(edge_v[idx] - min_edge_v)); + + /* calculate optimal point */ + for (idx = 0; idx < vw_num * 2; idx++) { + t_opt_temp = t_opt_temp + + (edge_t[idx] + edge_t[idx + 1] - 2 * min_edge_t) * + ((edge_t[idx] - min_edge_t)*(edge_v[idx + 1] - min_edge_v) - + (edge_t[idx + 1] - min_edge_t)*(edge_v[idx] - min_edge_v)); + v_opt_temp = v_opt_temp + + (edge_v[idx] + edge_v[idx + 1] - 2 * min_edge_v) * + ((edge_t[idx] - min_edge_t)*(edge_v[idx + 1] - min_edge_v) - + (edge_t[idx + 1] - min_edge_t)*(edge_v[idx] - min_edge_v)); + } + + *t_opt = t_opt_temp / (3 * polygon_area); + *v_opt = v_opt_temp / (3 * polygon_area); + + /* re-shift */ + *t_opt += min_edge_t; + *v_opt += min_edge_v; + + /* calculate d_min */ + for (idx = 0; idx < 2 * vw_num; idx++) { + s0 = (*t_opt - edge_t[idx]) * (*t_opt - edge_t[idx]) + + (*v_opt - edge_v[idx]) * (*v_opt - edge_v[idx]); + d_min = (d_min > s0) ? s0 : d_min; + } + DEBUG_CALIBRATION(DEBUG_LEVEL_TRACE, + ("%s: r_sq %d, slope %d, area = %d, , d_min = %d\n", + __func__, r_sq, slope, polygon_area, d_min)); + + /* insert vw eye to register database for validation */ + if (d_min < 0) + d_min = -d_min; + if (polygon_area < 0) + polygon_area = -polygon_area; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, ACCESS_TYPE_UNICAST, subphy_num, + DDR_PHY_DATA, RESULT_PHY_REG + effective_cs + 4 * (1 - mode), + polygon_area); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, + dmin_phy_reg_table[effective_cs * 5 + subphy_num][0], DDR_PHY_CONTROL, + dmin_phy_reg_table[effective_cs * 5 + subphy_num][1], ®_val); + if (status != MV_OK) + return status; + + reg_val &= 0xff << (8 * mode); /* rx clean bits 0..8, tx bits 9..16 */ + reg_val |= d_min / 2 << (8 * (1 - mode)); /* rX write bits 0..8, tx bits 9..16 */ + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, ACCESS_TYPE_UNICAST, + dmin_phy_reg_table[effective_cs * 5 + subphy_num][0], DDR_PHY_CONTROL, + dmin_phy_reg_table[effective_cs * 5 + subphy_num][1], reg_val); + if (status != MV_OK) + return status; + + if (polygon_area < 400) { + DEBUG_CALIBRATION(DEBUG_LEVEL_ERROR, + ("%s: if %d, subphy %d: poligon area too small %d (dmin %d)\n", + __func__, if_id, subphy_num, polygon_area, d_min)); + if (debug_mode == 0) + return MV_FAIL; + } + + return MV_OK; +} + +/* tap tuning flow */ +enum { + DQS_TO_DQ_LONG, + DQS_TO_DQ_SHORT +}; +enum { + ALIGN_LEFT, + ALIGN_CENTER, + ALIGN_RIGHT +}; +#define ONE_MHZ 1000000 +#define MAX_SKEW_DLY 200 /* in ps */ +#define NOMINAL_PBS_DLY 9 /* in ps */ +#define MIN_WL_TO_CTX_ADLL_DIFF 2 /* in taps */ +#define DQS_SHIFT_INIT_VAL 30 +#define MAX_PBS_NUM 31 +#define ADLL_TAPS_PER_PHASE 32 +#define ADLL_TAPS_PER_PERIOD (ADLL_TAPS_PER_PHASE * 2) +#define ADLL_TX_RES_REG_MASK 0xff +#define VW_DESKEW_BIAS 0xa +static int mv_ddr4_tap_tuning(u8 dev, u16 (*pbs_tap_factor)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS], u8 mode) +{ + enum hws_training_ip_stat training_result[MAX_INTERFACE_NUM]; + u32 iface, subphy, bit, pattern; + u32 limit_div; + u8 curr_start_win, curr_end_win; + u8 upd_curr_start_win, upd_curr_end_win; + u8 start_win_diff, end_win_diff; + u32 max_win_size, a, b; + u32 cs_ena_reg_val[MAX_INTERFACE_NUM]; + u32 reg_addr; + enum hws_search_dir search_dir; + enum hws_dir dir; + u32 *result[MAX_BUS_NUM][HWS_SEARCH_DIR_LIMIT]; + u32 result1[MAX_BUS_NUM][HWS_SEARCH_DIR_LIMIT][BUS_WIDTH_IN_BITS]; + u8 subphy_max = ddr3_tip_dev_attr_get(dev, MV_ATTR_OCTET_PER_INTERFACE); + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + enum hws_training_result result_type = RESULT_PER_BIT; + int status = MV_OK; + int i; + u32 reg_val; + u32 freq = mv_ddr_freq_get(tm->interface_params->memory_freq); + /* calc adll tap in ps based on frequency */ + int adll_tap = (ONE_MHZ / freq) / ADLL_TAPS_PER_PERIOD; + int dq_to_dqs_delta[MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; /* skew b/w dq and dqs */ + u32 wl_adll[MAX_BUS_NUM]; /* wl solution adll value */ + int is_dq_dqs_short[MAX_BUS_NUM] = {0}; /* tx byte's state */ + u32 new_pbs_per_byte[MAX_BUS_NUM]; /* dq pads' pbs value correction */ + /* threshold to decide subphy needs dqs pbs delay */ + int dq_to_dqs_min_delta_threshold = MIN_WL_TO_CTX_ADLL_DIFF + MAX_SKEW_DLY / adll_tap; + /* search init condition */ + int dq_to_dqs_min_delta = dq_to_dqs_min_delta_threshold * 2; + u32 pbs_tap_factor0 = PBS_VAL_FACTOR * NOMINAL_PBS_DLY / adll_tap; /* init lambda */ + /* adapt pbs to frequency */ + u32 new_pbs = (1810000 - (345 * freq)) / 100000; + int stage_num, loop; + int wl_tap, new_wl_tap; + int pbs_tap_factor_avg; + int dqs_shift[MAX_BUS_NUM]; /* dqs' pbs delay */ + static u16 tmp_pbs_tap_factor[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, ("Starting ddr4 tap tuning training stage\n")); + + for (i = 0; i < MAX_BUS_NUM; i++) + dqs_shift[i] = DQS_SHIFT_INIT_VAL; + + if (mode == TX_DIR) { + max_win_size = MAX_WINDOW_SIZE_TX; + dir = OPER_WRITE; + } else { + max_win_size = MAX_WINDOW_SIZE_RX; + dir = OPER_READ; + } + + /* init all pbs registers */ + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + if (mode == RX_DIR) + reg_addr = PBS_RX_BCAST_PHY_REG(effective_cs); + else + reg_addr = PBS_TX_BCAST_PHY_REG(effective_cs); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_DATA, reg_addr, 0); + + if (mode == RX_DIR) + reg_addr = PBS_RX_PHY_REG(effective_cs, DQSP_PAD); + else + reg_addr = PBS_TX_PHY_REG(effective_cs, DQSP_PAD); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_DATA, reg_addr, 0); + if (mode == RX_DIR) + reg_addr = PBS_RX_PHY_REG(effective_cs, DQSN_PAD); + else + reg_addr = PBS_TX_PHY_REG(effective_cs, DQSN_PAD); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, DDR_PHY_DATA, reg_addr, 0); + } + + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + /* save current cs enable reg val */ + ddr3_tip_if_read(dev, ACCESS_TYPE_UNICAST, iface, DUAL_DUNIT_CFG_REG, + cs_ena_reg_val, MASK_ALL_BITS); + + /* enable single cs */ + ddr3_tip_if_write(dev, ACCESS_TYPE_UNICAST, iface, DUAL_DUNIT_CFG_REG, + (SINGLE_CS_ENA << SINGLE_CS_PIN_OFFS), + (SINGLE_CS_PIN_MASK << SINGLE_CS_PIN_OFFS)); + } + + /* FIXME: fix this hard-coded parameters due to compilation issue with patterns definitions */ + pattern = MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask) ? 73 : 23; + stage_num = (mode == RX_DIR) ? 1 : 2; + /* find window; run training */ + for (loop = 0; loop < stage_num; loop++) { + ddr3_tip_ip_training_wrapper(dev, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, result_type, HWS_CONTROL_ELEMENT_ADLL, PARAM_NOT_CARE, + dir, tm->if_act_mask, 0x0, max_win_size - 1, max_win_size - 1, + pattern, EDGE_FPF, CS_SINGLE, PARAM_NOT_CARE, training_result); + + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + rx_vw_pos[iface][subphy] = ALIGN_CENTER; + new_pbs_per_byte[subphy] = new_pbs; /* rx init */ + if ((mode == TX_DIR) && (loop == 0)) { + /* read nominal wl */ + ddr3_tip_bus_read(dev, iface, ACCESS_TYPE_UNICAST, subphy, + DDR_PHY_DATA, WL_PHY_REG(effective_cs), + ®_val); + wl_adll[subphy] = reg_val; + } + + for (search_dir = HWS_LOW2HIGH; search_dir <= HWS_HIGH2LOW; search_dir++) { + ddr3_tip_read_training_result(dev, iface, ACCESS_TYPE_UNICAST, subphy, + ALL_BITS_PER_PUP, search_dir, dir, + result_type, TRAINING_LOAD_OPERATION_UNLOAD, + CS_SINGLE, &(result[subphy][search_dir]), + 1, 0, 0); + + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("cs %d if %d subphy %d mode %d result: " + "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + effective_cs, iface, subphy, mode, + result[subphy][search_dir][0], + result[subphy][search_dir][1], + result[subphy][search_dir][2], + result[subphy][search_dir][3], + result[subphy][search_dir][4], + result[subphy][search_dir][5], + result[subphy][search_dir][6], + result[subphy][search_dir][7])); + } + + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + a = result[subphy][HWS_LOW2HIGH][bit]; + b = result[subphy][HWS_HIGH2LOW][bit]; + result1[subphy][HWS_LOW2HIGH][bit] = a; + result1[subphy][HWS_HIGH2LOW][bit] = b; + /* measure distance between ctx and wl adlls */ + if (mode == TX_DIR) { + a &= ADLL_TX_RES_REG_MASK; + if (a >= ADLL_TAPS_PER_PERIOD) + a -= ADLL_TAPS_PER_PERIOD; + dq_to_dqs_delta[subphy][bit] = + a - (wl_adll[subphy] & WR_LVL_REF_DLY_MASK); + if (dq_to_dqs_delta[subphy][bit] < dq_to_dqs_min_delta) + dq_to_dqs_min_delta = dq_to_dqs_delta[subphy][bit]; + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("%s: dq_to_dqs_delta[%d][%d] %d\n", + __func__, subphy, bit, + dq_to_dqs_delta[subphy][bit])); + } + } + + /* adjust wl on the first pass only */ + if ((mode == TX_DIR) && (loop == 0)) { + /* dqs pbs shift if distance b/w adll is too large */ + if (dq_to_dqs_min_delta < dq_to_dqs_min_delta_threshold) { + /* first calculate the WL in taps */ + wl_tap = ((wl_adll[subphy] >> WR_LVL_REF_DLY_OFFS) & + WR_LVL_REF_DLY_MASK) + + ((wl_adll[subphy] >> WR_LVL_PH_SEL_OFFS) & + WR_LVL_PH_SEL_MASK) * ADLL_TAPS_PER_PHASE; + + /* calc dqs pbs shift */ + dqs_shift[subphy] = + dq_to_dqs_min_delta_threshold - dq_to_dqs_min_delta; + /* check that the WL result have enough taps to reduce */ + if (wl_tap > 0) { + if (wl_tap < dqs_shift[subphy]) + dqs_shift[subphy] = wl_tap-1; + else + dqs_shift[subphy] = dqs_shift[subphy]; + } else { + dqs_shift[subphy] = 0; + } + DEBUG_TAP_TUNING_ENGINE + (DEBUG_LEVEL_INFO, + ("%s: tap tune tx: subphy %d, dqs shifted by %d adll taps, ", + __func__, subphy, dqs_shift[subphy])); + dqs_shift[subphy] = + (dqs_shift[subphy] * PBS_VAL_FACTOR) / pbs_tap_factor0; + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("%d pbs taps\n", dqs_shift[subphy])); + /* check high limit */ + if (dqs_shift[subphy] > MAX_PBS_NUM) + dqs_shift[subphy] = MAX_PBS_NUM; + reg_addr = PBS_TX_PHY_REG(effective_cs, DQSP_PAD); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + reg_addr, dqs_shift[subphy]); + reg_addr = PBS_TX_PHY_REG(effective_cs, DQSN_PAD); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + reg_addr, dqs_shift[subphy]); + + is_dq_dqs_short[subphy] = DQS_TO_DQ_SHORT; + + new_wl_tap = wl_tap - + (dqs_shift[subphy] * pbs_tap_factor0) / PBS_VAL_FACTOR; + reg_val = (new_wl_tap & WR_LVL_REF_DLY_MASK) | + ((new_wl_tap & + ((WR_LVL_PH_SEL_MASK << WR_LVL_PH_SEL_OFFS) >> 1)) + << 1) | + (wl_adll[subphy] & + ((CTRL_CENTER_DLY_MASK << CTRL_CENTER_DLY_OFFS) | + (CTRL_CENTER_DLY_INV_MASK << CTRL_CENTER_DLY_INV_OFFS))); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + WL_PHY_REG(effective_cs), reg_val); + DEBUG_TAP_TUNING_ENGINE + (DEBUG_LEVEL_INFO, + ("%s: subphy %d, dq_to_dqs_min_delta %d, dqs_shift %d, old wl %d, temp wl %d 0x%08x\n", + __func__, subphy, dq_to_dqs_min_delta, + dqs_shift[subphy], wl_tap, new_wl_tap, + reg_val)); + } + } + dq_to_dqs_min_delta = dq_to_dqs_min_delta_threshold * 2; + } + } + } + + /* deskew dq */ + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + if (mode == RX_DIR) + reg_addr = PBS_RX_BCAST_PHY_REG(effective_cs); + else + reg_addr = PBS_TX_BCAST_PHY_REG(effective_cs); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + DDR_PHY_DATA, reg_addr, new_pbs_per_byte[0]); + } + + /* run training search and get results */ + ddr3_tip_ip_training_wrapper(dev, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, result_type, HWS_CONTROL_ELEMENT_ADLL, PARAM_NOT_CARE, + dir, tm->if_act_mask, 0x0, max_win_size - 1, max_win_size - 1, + pattern, EDGE_FPF, CS_SINGLE, PARAM_NOT_CARE, training_result); + + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + /* read training ip results from db */ + for (search_dir = HWS_LOW2HIGH; search_dir <= HWS_HIGH2LOW; search_dir++) { + ddr3_tip_read_training_result(dev, iface, ACCESS_TYPE_UNICAST, + subphy, ALL_BITS_PER_PUP, search_dir, + dir, result_type, + TRAINING_LOAD_OPERATION_UNLOAD, CS_SINGLE, + &(result[subphy][search_dir]), + 1, 0, 0); + + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("cs %d if %d subphy %d mode %d result: " + "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + effective_cs, iface, subphy, mode, + result[subphy][search_dir][0], + result[subphy][search_dir][1], + result[subphy][search_dir][2], + result[subphy][search_dir][3], + result[subphy][search_dir][4], + result[subphy][search_dir][5], + result[subphy][search_dir][6], + result[subphy][search_dir][7])); + } + + /* calc dq skew impact on vw position */ + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + start_win_diff = 0; + end_win_diff = 0; + limit_div = 0; + if ((GET_LOCK_RESULT(result1[subphy][HWS_LOW2HIGH][bit]) == 1) && + (GET_LOCK_RESULT(result1[subphy][HWS_HIGH2LOW][bit]) == 1) && + (GET_LOCK_RESULT(result[subphy][HWS_LOW2HIGH][bit]) == 1) && + (GET_LOCK_RESULT(result[subphy][HWS_HIGH2LOW][bit]) == 1)) { + curr_start_win = GET_TAP_RESULT(result1[subphy][HWS_LOW2HIGH][bit], + EDGE_1); + curr_end_win = GET_TAP_RESULT(result1[subphy][HWS_HIGH2LOW][bit], + EDGE_1); + upd_curr_start_win = GET_TAP_RESULT(result[subphy][HWS_LOW2HIGH][bit], + EDGE_1); + upd_curr_end_win = GET_TAP_RESULT(result[subphy][HWS_HIGH2LOW][bit], + EDGE_1); + + /* update tx start skew; set rx vw position */ + if ((upd_curr_start_win != 0) && (curr_start_win != 0)) { + if (upd_curr_start_win > curr_start_win) { + start_win_diff = upd_curr_start_win - curr_start_win; + if (mode == TX_DIR) + start_win_diff = + curr_start_win + 64 - upd_curr_start_win; + } else { + start_win_diff = curr_start_win - upd_curr_start_win; + } + limit_div++; + } else { + rx_vw_pos[iface][subphy] = ALIGN_LEFT; + } + + /* update tx end skew; set rx vw position */ + if (((upd_curr_end_win != max_win_size) && (curr_end_win != max_win_size)) || + (mode == TX_DIR)) { + if (upd_curr_end_win > curr_end_win) { + end_win_diff = upd_curr_end_win - curr_end_win; + if (mode == TX_DIR) + end_win_diff = + curr_end_win + 64 - upd_curr_end_win; + } else { + end_win_diff = curr_end_win - upd_curr_end_win; + } + limit_div++; + } else { + rx_vw_pos[iface][subphy] = ALIGN_RIGHT; + } + + /* + * don't care about start in tx mode + * TODO: temporary solution for instability in the start adll search + */ + if (mode == TX_DIR) { + start_win_diff = end_win_diff; + limit_div = 2; + } + + /* + * workaround for false tx measurements in tap tune stage + * tx pbs factor will use rx pbs factor results instead + */ + if ((limit_div != 0) && (mode == RX_DIR)) { + pbs_tap_factor[iface][subphy][bit] = + PBS_VAL_FACTOR * (start_win_diff + end_win_diff) / + (new_pbs_per_byte[subphy] * limit_div); + tmp_pbs_tap_factor[iface][subphy][bit] = + pbs_tap_factor[iface][subphy][bit]; + } else { + pbs_tap_factor[iface][subphy][bit] = + tmp_pbs_tap_factor[iface][subphy][bit]; + } + + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("cs %d if %d subphy %d bit %d sw1 %d sw2 %d " + "ew1 %d ew2 %d sum delta %d, align %d\n", + effective_cs, iface, subphy, bit, + curr_start_win, upd_curr_start_win, + curr_end_win, upd_curr_end_win, + pbs_tap_factor[iface][subphy][bit], + rx_vw_pos[iface][subphy])); + } else { + status = MV_FAIL; + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("tap tuning fail %s cs %d if %d subphy %d bit %d\n", + (mode == RX_DIR) ? "RX" : "TX", effective_cs, iface, + subphy, bit)); + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("cs %d if %d subphy %d mode %d result: " + "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + effective_cs, iface, subphy, mode, + result[subphy][HWS_LOW2HIGH][0], + result[subphy][HWS_LOW2HIGH][1], + result[subphy][HWS_LOW2HIGH][2], + result[subphy][HWS_LOW2HIGH][3], + result[subphy][HWS_LOW2HIGH][4], + result[subphy][HWS_LOW2HIGH][5], + result[subphy][HWS_LOW2HIGH][6], + result[subphy][HWS_LOW2HIGH][7])); + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("cs %d if %d subphy %d mode %d result: " + "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + effective_cs, iface, subphy, mode, + result[subphy][HWS_HIGH2LOW][0], + result[subphy][HWS_HIGH2LOW][1], + result[subphy][HWS_HIGH2LOW][2], + result[subphy][HWS_HIGH2LOW][3], + result[subphy][HWS_HIGH2LOW][4], + result[subphy][HWS_HIGH2LOW][5], + result[subphy][HWS_HIGH2LOW][6], + result[subphy][HWS_HIGH2LOW][7])); + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("cs %d if %d subphy %d mode %d result: " + "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + effective_cs, iface, subphy, mode, + result1[subphy][HWS_LOW2HIGH][0], + result1[subphy][HWS_LOW2HIGH][1], + result1[subphy][HWS_LOW2HIGH][2], + result1[subphy][HWS_LOW2HIGH][3], + result1[subphy][HWS_LOW2HIGH][4], + result1[subphy][HWS_LOW2HIGH][5], + result1[subphy][HWS_LOW2HIGH][6], + result1[subphy][HWS_LOW2HIGH][7])); + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("cs %d if %d subphy %d mode %d result: " + "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + effective_cs, iface, subphy, mode, + result1[subphy][HWS_HIGH2LOW][0], + result1[subphy][HWS_HIGH2LOW][1], + result1[subphy][HWS_HIGH2LOW][2], + result1[subphy][HWS_HIGH2LOW][3], + result1[subphy][HWS_HIGH2LOW][4], + result1[subphy][HWS_HIGH2LOW][5], + result1[subphy][HWS_HIGH2LOW][6], + result1[subphy][HWS_HIGH2LOW][7])); + } + } + } + } + + /* restore cs enable value */ + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + ddr3_tip_if_write(dev, ACCESS_TYPE_UNICAST, iface, DUAL_DUNIT_CFG_REG, + cs_ena_reg_val[iface], MASK_ALL_BITS); + } + + /* restore pbs (set to 0) */ + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + if (mode == RX_DIR) + reg_addr = PBS_RX_BCAST_PHY_REG(effective_cs); + else + reg_addr = PBS_TX_BCAST_PHY_REG(effective_cs); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, ACCESS_TYPE_UNICAST, + subphy, DDR_PHY_DATA, reg_addr, 0); + } + } + + /* set deskew bias for rx valid window */ + if (mode == RX_DIR) { + /* + * pattern special for rx + * check for rx_vw_pos stat + * - add n pbs taps to every dq to align to left (pbs_max set to (31 - n)) + * - add pbs taps to dqs to align to right + */ + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + if (rx_vw_pos[iface][subphy] == ALIGN_LEFT) { + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, 0, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + PBS_RX_BCAST_PHY_REG(effective_cs), + VW_DESKEW_BIAS); + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("%s: if %d, subphy %d aligned to left\n", + __func__, iface, subphy)); + } else if (rx_vw_pos[iface][subphy] == ALIGN_RIGHT) { + reg_addr = PBS_RX_PHY_REG(effective_cs, DQSP_PAD); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, 0, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + reg_addr, VW_DESKEW_BIAS); + reg_addr = PBS_RX_PHY_REG(effective_cs, DQSN_PAD); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, 0, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + reg_addr, VW_DESKEW_BIAS); + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("%s: if %d , subphy %d aligned to right\n", + __func__, iface, subphy)); + } + } /* subphy */ + } /* if */ + } else { /* tx mode */ + /* update wl solution */ + if (status == MV_OK) { + for (iface = 0; iface < MAX_INTERFACE_NUM; iface++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, iface); + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + if (is_dq_dqs_short[subphy]) { + wl_tap = ((wl_adll[subphy] >> WR_LVL_REF_DLY_OFFS) & + WR_LVL_REF_DLY_MASK) + + ((wl_adll[subphy] >> WR_LVL_PH_SEL_OFFS) & + WR_LVL_PH_SEL_MASK) * ADLL_TAPS_PER_PHASE; + pbs_tap_factor_avg = (pbs_tap_factor[iface][subphy][0] + + pbs_tap_factor[iface][subphy][1] + + pbs_tap_factor[iface][subphy][2] + + pbs_tap_factor[iface][subphy][3] + + pbs_tap_factor[iface][subphy][4] + + pbs_tap_factor[iface][subphy][5] + + pbs_tap_factor[iface][subphy][6] + + pbs_tap_factor[iface][subphy][7]) / 8; + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("%s: pbs_tap_factor_avg %d\n", + __func__, pbs_tap_factor_avg)); + new_wl_tap = wl_tap - + (dqs_shift[subphy] * pbs_tap_factor_avg) / + PBS_VAL_FACTOR; + /* + * check wraparound due to change in the pbs_tap_factor_avg + * vs the first guess + */ + if (new_wl_tap <= 0) + new_wl_tap = 0; + + reg_val = (new_wl_tap & WR_LVL_REF_DLY_MASK) | + ((new_wl_tap & + ((WR_LVL_PH_SEL_MASK << WR_LVL_PH_SEL_OFFS) >> 1)) + << 1) | + (wl_adll[subphy] & + ((CTRL_CENTER_DLY_MASK << CTRL_CENTER_DLY_OFFS) | + (CTRL_CENTER_DLY_INV_MASK << CTRL_CENTER_DLY_INV_OFFS))); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + WL_PHY_REG(effective_cs), reg_val); + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("%s: tap tune tx algorithm final wl:\n", + __func__)); + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("%s: subphy %d, dqs pbs %d, old wl %d, final wl %d 0x%08x -> 0x%08x\n", + __func__, subphy, pbs_tap_factor_avg, + wl_tap, new_wl_tap, wl_adll[subphy], + reg_val)); + } + } + } + } else { + /* return to nominal wl */ + for (subphy = 0; subphy < subphy_max; subphy++) { + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, ACCESS_TYPE_UNICAST, + subphy, DDR_PHY_DATA, WL_PHY_REG(effective_cs), + wl_adll[subphy]); + DEBUG_TAP_TUNING_ENGINE(DEBUG_LEVEL_INFO, + ("%s: tap tune failed; return to nominal wl\n", + __func__)); + reg_addr = PBS_TX_PHY_REG(effective_cs, DQSP_PAD); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, ACCESS_TYPE_UNICAST, + subphy, DDR_PHY_DATA, reg_addr, 0); + reg_addr = PBS_TX_PHY_REG(effective_cs, DQSN_PAD); + ddr3_tip_bus_write(dev, ACCESS_TYPE_UNICAST, iface, ACCESS_TYPE_UNICAST, + subphy, DDR_PHY_DATA, reg_addr, 0); + } + } + } + + return status; +} + +/* receiver duty cycle flow */ +#define DDR_PHY_JIRA_ENABLE +int mv_ddr4_receiver_calibration(u8 dev_num) +{ + u32 if_id, subphy_num; + u32 vref_idx, dq_idx, pad_num = 0; + u8 dq_vref_start_win[MAX_INTERFACE_NUM][MAX_BUS_NUM][RECEIVER_DC_MAX_COUNT]; + u8 dq_vref_end_win[MAX_INTERFACE_NUM][MAX_BUS_NUM][RECEIVER_DC_MAX_COUNT]; + u8 c_vref[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 valid_win_size[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 c_opt_per_bus[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 valid_vref_cnt[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 valid_vref_ptr[MAX_INTERFACE_NUM][MAX_BUS_NUM][RECEIVER_DC_MAX_COUNT]; + u8 center_adll[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 center_vref[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 pbs_res_per_bus[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + u16 lambda_per_dq[MAX_INTERFACE_NUM][MAX_BUS_NUM][BUS_WIDTH_IN_BITS]; + u8 dqs_pbs = 0, const_pbs; + int tap_tune_passed = 0; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + enum hws_result *flow_result = ddr3_tip_get_result_ptr(training_stage); + u8 subphy_max = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); +#ifdef DDR_PHY_JIRA_ENABLE + u32 dqs_pbs_jira56[MAX_INTERFACE_NUM][MAX_BUS_NUM]; + u8 delta = 0; +#endif + unsigned int max_cs = mv_ddr_cs_num_get(); + u32 ctr_x[4], pbs_temp[4]; + u16 cs_index = 0, pbs_rx_avg, lambda_avg; + int status; + + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, ("Starting ddr4 dc calibration training stage\n")); + + vdq_tv = 0; + duty_cycle = 0; + + /* reset valid vref counter per if and subphy */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) + for (subphy_num = 0; subphy_num < MAX_BUS_NUM; subphy_num++) + valid_vref_cnt[if_id][subphy_num] = 0; + + /* calculate pbs-adll tap tuning */ + /* reset special pattern configuration to re-run this stage */ + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + DDR_PHY_DATA, 0x5f + effective_cs * 0x10, 0x0); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + DDR_PHY_DATA, 0x54 + effective_cs * 0x10, 0x0); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + DDR_PHY_DATA, 0x55 + effective_cs * 0x10, 0x0); + if (status != MV_OK) + return status; + +#ifdef DDR_PHY_JIRA_ENABLE + if (effective_cs != 0) { + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + status = ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, subphy_num, + DDR_PHY_DATA, 0x54 + 0 * 0x10, + &dqs_pbs_jira56[if_id][subphy_num]); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, 0x54 + 0 * 0x10, 0x0); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, 0x55 + 0 * 0x10, 0x0); + if (status != MV_OK) + return status; + } + } + } +#endif + + if (mv_ddr4_tap_tuning(dev_num, lambda_per_dq, RX_DIR) == MV_OK) + tap_tune_passed = 1; + + /* main loop for 2d scan (low_to_high voltage scan) */ + for (duty_cycle = RECEIVER_DC_MIN_RANGE; + duty_cycle <= RECEIVER_DC_MAX_RANGE; + duty_cycle += RECEIVER_DC_STEP_SIZE) { + /* set new receiver dc training value in dram */ + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, + VREF_BCAST_PHY_REG(effective_cs), duty_cycle); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, + VREF_PHY_REG(effective_cs, DQSP_PAD), duty_cycle); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, + VREF_PHY_REG(effective_cs, DQSN_PAD), duty_cycle); + if (status != MV_OK) + return status; + + if (tap_tune_passed == 0) { + if (mv_ddr4_tap_tuning(dev_num, lambda_per_dq, RX_DIR) == MV_OK) { + tap_tune_passed = 1; + } else { + DEBUG_CALIBRATION(DEBUG_LEVEL_ERROR, + ("rc, tap tune failed inside calibration\n")); + continue; + } + } + + if (mv_ddr4_centralization(dev_num, lambda_per_dq, c_opt_per_bus, pbs_res_per_bus, + valid_win_size, RX_DIR, vdq_tv, duty_cycle) != MV_OK) { + DEBUG_CALIBRATION(DEBUG_LEVEL_ERROR, + ("error: ddr4 centralization failed (duty_cycle %d)!!!\n", duty_cycle)); + if (debug_mode == 0) + break; + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + if (valid_win_size[if_id][subphy_num] > 8) { + /* window is valid; keep current duty_cycle value and increment counter */ + vref_idx = valid_vref_cnt[if_id][subphy_num]; + valid_vref_ptr[if_id][subphy_num][vref_idx] = duty_cycle; + valid_vref_cnt[if_id][subphy_num]++; + c_vref[if_id][subphy_num] = c_opt_per_bus[if_id][subphy_num]; + /* set 0 for possible negative values */ + dq_vref_start_win[if_id][subphy_num][vref_idx] = + c_vref[if_id][subphy_num] + 1 - valid_win_size[if_id][subphy_num] / 2; + dq_vref_start_win[if_id][subphy_num][vref_idx] = + (valid_win_size[if_id][subphy_num] % 2 == 0) ? + dq_vref_start_win[if_id][subphy_num][vref_idx] : + dq_vref_start_win[if_id][subphy_num][vref_idx] - 1; + dq_vref_end_win[if_id][subphy_num][vref_idx] = + c_vref[if_id][subphy_num] + valid_win_size[if_id][subphy_num] / 2; + } + } /* subphy */ + } /* if */ + } /* duty_cycle */ + + if (tap_tune_passed == 0) { + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("%s: tap tune not passed on any duty_cycle value\n", __func__)); + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + /* report fail for all active interfaces; multi-interface support - tbd */ + flow_result[if_id] = TEST_FAILED; + } + + return MV_FAIL; + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("calculating center of mass for subphy %d, valid window size %d\n", + subphy_num, valid_win_size[if_id][subphy_num])); + if (valid_vref_cnt[if_id][subphy_num] > 0) { + rx_eye_hi_lvl[subphy_num] = + valid_vref_ptr[if_id][subphy_num][valid_vref_cnt[if_id][subphy_num] - 1]; + rx_eye_lo_lvl[subphy_num] = valid_vref_ptr[if_id][subphy_num][0]; + /* calculate center of mass sampling point (t, v) for each subphy */ + status = mv_ddr4_center_of_mass_calc(dev_num, if_id, subphy_num, RX_DIR, + dq_vref_start_win[if_id][subphy_num], + dq_vref_end_win[if_id][subphy_num], + valid_vref_ptr[if_id][subphy_num], + valid_vref_cnt[if_id][subphy_num], + ¢er_vref[if_id][subphy_num], + ¢er_adll[if_id][subphy_num]); + if (status != MV_OK) + return status; + + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("center of mass results: vref %d, adll %d\n", + center_vref[if_id][subphy_num], center_adll[if_id][subphy_num])); + } else { + DEBUG_CALIBRATION(DEBUG_LEVEL_ERROR, + ("%s: no valid window found for cs %d, subphy %d\n", + __func__, effective_cs, subphy_num)); + return MV_FAIL; + } + } + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_UNICAST, subphy_num, DDR_PHY_DATA, + VREF_BCAST_PHY_REG(effective_cs), + center_vref[if_id][subphy_num]); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_UNICAST, subphy_num, DDR_PHY_DATA, + VREF_PHY_REG(effective_cs, DQSP_PAD), + center_vref[if_id][subphy_num]); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, + ACCESS_TYPE_UNICAST, subphy_num, DDR_PHY_DATA, + VREF_PHY_REG(effective_cs, DQSN_PAD), + center_vref[if_id][subphy_num]); + if (status != MV_OK) + return status; + + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, ("final dc %d\n", center_vref[if_id][subphy_num])); + } + + /* run centralization again with optimal vref to update global structures */ + mv_ddr4_centralization(dev_num, lambda_per_dq, c_opt_per_bus, pbs_res_per_bus, valid_win_size, + RX_DIR, 0, center_vref[if_id][0]); + + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + + const_pbs = 0xa; + mv_ddr4_dqs_reposition(RX_DIR, lambda_per_dq[if_id][subphy_num], + pbs_res_per_bus[if_id][subphy_num], 0x0, + ¢er_adll[if_id][subphy_num], &dqs_pbs); + + /* dq pbs update */ + for (dq_idx = 0; dq_idx < 8 ; dq_idx++) { + pad_num = dq_map_table[dq_idx + + subphy_num * BUS_WIDTH_IN_BITS + + if_id * BUS_WIDTH_IN_BITS * subphy_max]; + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, + 0x50 + pad_num + effective_cs * 0x10, + const_pbs + pbs_res_per_bus[if_id][subphy_num][dq_idx]); + if (status != MV_OK) + return status; + } + + /* dqs pbs update */ + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, subphy_num, + DDR_PHY_DATA, 0x54 + effective_cs * 0x10, dqs_pbs); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, subphy_num, + DDR_PHY_DATA, 0x55 + effective_cs * 0x10, dqs_pbs); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, + CRX_PHY_REG(effective_cs), + center_adll[if_id][subphy_num]); + if (status != MV_OK) + return status; + +#ifdef DDR_PHY_JIRA_ENABLE + if (effective_cs != 0) { + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, 0x54 + 0 * 0x10, + dqs_pbs_jira56[if_id][subphy_num]); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, 0x55 + 0 * 0x10, + dqs_pbs_jira56[if_id][subphy_num]); + if (status != MV_OK) + return status; + } +#endif + } + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + /* report pass for all active interfaces; multi-interface support - tbd */ + flow_result[if_id] = TEST_SUCCESS; + } + +#ifdef DDR_PHY_JIRA_ENABLE + if (effective_cs == (max_cs - 1)) { + /* adjust dqs to be as cs0 */ + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = 0; subphy_num < subphy_max; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + pbs_rx_avg = 0; + /* find average of all pbs of dqs and read ctr_x */ + for (cs_index = 0; cs_index < max_cs; cs_index++) { + status = ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, + 0x54 + cs_index * 0x10, + &pbs_temp[cs_index]); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, + 0x3 + cs_index * 0x4, + &ctr_x[cs_index]); + if (status != MV_OK) + return status; + + pbs_rx_avg = pbs_rx_avg + pbs_temp[cs_index]; + } + + pbs_rx_avg = pbs_rx_avg / max_cs; + + /* update pbs and ctr_x */ + lambda_avg = (lambda_per_dq[if_id][subphy_num][0] + + lambda_per_dq[if_id][subphy_num][1] + + lambda_per_dq[if_id][subphy_num][2] + + lambda_per_dq[if_id][subphy_num][3] + + lambda_per_dq[if_id][subphy_num][4] + + lambda_per_dq[if_id][subphy_num][5] + + lambda_per_dq[if_id][subphy_num][6] + + lambda_per_dq[if_id][subphy_num][7]) / 8; + + for (cs_index = 0; cs_index < max_cs; cs_index++) { + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, + 0, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, + 0x54 + cs_index * 0x10, pbs_rx_avg); + if (status != MV_OK) + return status; + + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, + 0, ACCESS_TYPE_UNICAST, + subphy_num, DDR_PHY_DATA, + 0x55 + cs_index * 0x10, pbs_rx_avg); + if (status != MV_OK) + return status; + + /* update */ + if (pbs_rx_avg >= pbs_temp[cs_index]) { + delta = ((pbs_rx_avg - pbs_temp[cs_index]) * lambda_avg) / + PBS_VAL_FACTOR; + if (ctr_x[cs_index] >= delta) { + ctr_x[cs_index] = ctr_x[cs_index] - delta; + } else { + ctr_x[cs_index] = 0; + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("jira ddrphy56 extend fix(-) required %d\n", + delta)); + } + } else { + delta = ((pbs_temp[cs_index] - pbs_rx_avg) * lambda_avg) / + PBS_VAL_FACTOR; + if ((ctr_x[cs_index] + delta) > 32) { + ctr_x[cs_index] = 32; + DEBUG_CALIBRATION(DEBUG_LEVEL_INFO, + ("jira ddrphy56 extend fix(+) required %d\n", + delta)); + } else { + ctr_x[cs_index] = (ctr_x[cs_index] + delta); + } + } + status = ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, subphy_num, DDR_PHY_DATA, + CRX_PHY_REG(effective_cs), + ctr_x[cs_index]); + if (status != MV_OK) + return status; + } + } + } + } +#endif + + return MV_OK; +} + +#define MAX_LOOPS 2 /* maximum number of loops to get to solution */ +#define LEAST_SIGNIFICANT_BYTE_MASK 0xff +#define VW_SUBPHY_LIMIT_MIN 0 +#define VW_SUBPHY_LIMIT_MAX 127 +#define MAX_PBS_NUM 31 /* TODO: added by another patch */ +enum{ + LOCKED, + UNLOCKED +}; +enum { + PASS, + FAIL +}; + +int mv_ddr4_dm_tuning(u32 cs, u16 (*pbs_tap_factor)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS]) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + enum hws_training_ip_stat training_result; + enum hws_training_result result_type = RESULT_PER_BIT; + enum hws_search_dir search_dir; + enum hws_dir dir = OPER_WRITE; + int vw_sphy_hi_diff = 0; + int vw_sphy_lo_diff = 0; + int x, y; + int status; + unsigned int a, b, c; + u32 ctx_vector[MAX_BUS_NUM]; + u32 subphy, bit, pattern; + u32 *result[MAX_BUS_NUM][HWS_SEARCH_DIR_LIMIT]; + u32 max_win_size = MAX_WINDOW_SIZE_TX; + u32 dm_lambda[MAX_BUS_NUM] = {0}; + u32 loop; + u32 adll_tap; + u32 dm_pbs, max_pbs; + u32 dq_pbs[BUS_WIDTH_IN_BITS]; + u32 new_dq_pbs[BUS_WIDTH_IN_BITS]; + u32 dq, pad; + u32 dq_pbs_diff; + u32 byte_center, dm_center; + u32 idx, reg_val; + u32 dm_pad = mv_ddr_dm_pad_get(); + u8 subphy_max = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE); + u8 dm_vw_vector[MAX_BUS_NUM * ADLL_TAPS_PER_PERIOD]; + u8 vw_sphy_lo_lmt[MAX_BUS_NUM]; + u8 vw_sphy_hi_lmt[MAX_BUS_NUM]; + u8 dm_status[MAX_BUS_NUM]; + + /* init */ + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + dm_status[subphy] = UNLOCKED; + for (bit = 0 ; bit < BUS_WIDTH_IN_BITS; bit++) + dm_lambda[subphy] += pbs_tap_factor[0][subphy][bit]; + dm_lambda[subphy] /= BUS_WIDTH_IN_BITS; + } + + /* get algorithm's adll result */ + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + ddr3_tip_bus_read(0, 0, ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + CTX_PHY_REG(cs), ®_val); + ctx_vector[subphy] = reg_val; + } + + for (loop = 0; loop < MAX_LOOPS; loop++) { + for (subphy = 0; subphy < subphy_max; subphy++) { + vw_sphy_lo_lmt[subphy] = VW_SUBPHY_LIMIT_MIN; + vw_sphy_hi_lmt[subphy] = VW_SUBPHY_LIMIT_MAX; + for (adll_tap = 0; adll_tap < ADLL_TAPS_PER_PERIOD; adll_tap++) { + idx = subphy * ADLL_TAPS_PER_PERIOD + adll_tap; + dm_vw_vector[idx] = PASS; + } + } + + /* get valid window of dm signal */ + mv_ddr_dm_vw_get(PATTERN_ZERO, cs, dm_vw_vector); + mv_ddr_dm_vw_get(PATTERN_ONE, cs, dm_vw_vector); + + /* get vw for dm disable */ + pattern = MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask) ? 73 : 23; + ddr3_tip_ip_training_wrapper(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ACCESS_TYPE_MULTICAST, + PARAM_NOT_CARE, result_type, HWS_CONTROL_ELEMENT_ADLL, PARAM_NOT_CARE, + dir, tm->if_act_mask, 0x0, max_win_size - 1, max_win_size - 1, pattern, + EDGE_FPF, CS_SINGLE, PARAM_NOT_CARE, &training_result); + + /* find skew of dm signal vs. dq data bits using its valid window */ + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + ddr3_tip_bus_write(0, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + CTX_PHY_REG(cs), ctx_vector[subphy]); + + for (search_dir = HWS_LOW2HIGH; search_dir <= HWS_HIGH2LOW; search_dir++) { + ddr3_tip_read_training_result(0, 0, ACCESS_TYPE_UNICAST, subphy, + ALL_BITS_PER_PUP, search_dir, dir, result_type, + TRAINING_LOAD_OPERATION_UNLOAD, CS_SINGLE, + &(result[subphy][search_dir]), + 1, 0, 0); + DEBUG_DM_TUNING(DEBUG_LEVEL_INFO, + ("dm cs %d if %d subphy %d result: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", + cs, 0, subphy, + result[subphy][search_dir][0], + result[subphy][search_dir][1], + result[subphy][search_dir][2], + result[subphy][search_dir][3], + result[subphy][search_dir][4], + result[subphy][search_dir][5], + result[subphy][search_dir][6], + result[subphy][search_dir][7])); + } + + if (dm_status[subphy] == LOCKED) + continue; + + for (bit = 0; bit < BUS_WIDTH_IN_BITS; bit++) { + result[subphy][HWS_LOW2HIGH][bit] &= LEAST_SIGNIFICANT_BYTE_MASK; + result[subphy][HWS_HIGH2LOW][bit] &= LEAST_SIGNIFICANT_BYTE_MASK; + + if (result[subphy][HWS_LOW2HIGH][bit] > vw_sphy_lo_lmt[subphy]) + vw_sphy_lo_lmt[subphy] = result[subphy][HWS_LOW2HIGH][bit]; + + if (result[subphy][HWS_HIGH2LOW][bit] < vw_sphy_hi_lmt[subphy]) + vw_sphy_hi_lmt[subphy] = result[subphy][HWS_HIGH2LOW][bit]; + } + + DEBUG_DM_TUNING(DEBUG_LEVEL_INFO, + ("loop %d, dm subphy %d, vw %d, %d\n", loop, subphy, + vw_sphy_lo_lmt[subphy], vw_sphy_hi_lmt[subphy])); + + idx = subphy * ADLL_TAPS_PER_PERIOD; + status = mv_ddr_dm_to_dq_diff_get(vw_sphy_hi_lmt[subphy], vw_sphy_lo_lmt[subphy], + &dm_vw_vector[idx], &vw_sphy_hi_diff, &vw_sphy_lo_diff); + if (status != MV_OK) + return MV_FAIL; + DEBUG_DM_TUNING(DEBUG_LEVEL_INFO, + ("vw_sphy_lo_diff %d, vw_sphy_hi_diff %d\n", + vw_sphy_lo_diff, vw_sphy_hi_diff)); + + /* dm is the strongest signal */ + if ((vw_sphy_hi_diff >= 0) && + (vw_sphy_lo_diff >= 0)) { + dm_status[subphy] = LOCKED; + } else if ((vw_sphy_hi_diff >= 0) && + (vw_sphy_lo_diff < 0) && + (loop == 0)) { /* update dm only */ + ddr3_tip_bus_read(0, 0, ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + PBS_TX_PHY_REG(cs, dm_pad), &dm_pbs); + x = -vw_sphy_lo_diff; /* get positive x */ + a = (unsigned int)x * PBS_VAL_FACTOR; + b = dm_lambda[subphy]; + if (round_div(a, b, &c) != MV_OK) + return MV_FAIL; + dm_pbs += (u32)c; + dm_pbs = (dm_pbs > MAX_PBS_NUM) ? MAX_PBS_NUM : dm_pbs; + ddr3_tip_bus_write(0, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, + subphy, DDR_PHY_DATA, + PBS_TX_PHY_REG(cs, dm_pad), dm_pbs); + } else if ((vw_sphy_hi_diff < 0) && + (vw_sphy_lo_diff >= 0) && + (loop == 0)) { /* update dq and c_opt */ + max_pbs = 0; + for (dq = 0; dq < BUS_WIDTH_IN_BITS; dq++) { + idx = dq + subphy * BUS_WIDTH_IN_BITS; + pad = dq_map_table[idx]; + ddr3_tip_bus_read(0, 0, ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + PBS_TX_PHY_REG(cs, pad), ®_val); + dq_pbs[dq] = reg_val; + x = -vw_sphy_hi_diff; /* get positive x */ + a = (unsigned int)x * PBS_VAL_FACTOR; + b = pbs_tap_factor[0][subphy][dq]; + if (round_div(a, b, &c) != MV_OK) + return MV_FAIL; + new_dq_pbs[dq] = dq_pbs[dq] + (u32)c; + if (max_pbs < new_dq_pbs[dq]) + max_pbs = new_dq_pbs[dq]; + } + + dq_pbs_diff = (max_pbs > MAX_PBS_NUM) ? (max_pbs - MAX_PBS_NUM) : 0; + for (dq = 0; dq < BUS_WIDTH_IN_BITS; dq++) { + idx = dq + subphy * BUS_WIDTH_IN_BITS; + reg_val = new_dq_pbs[dq] - dq_pbs_diff; + if (reg_val < 0) { + DEBUG_DM_TUNING(DEBUG_LEVEL_ERROR, + ("unexpected negative value found\n")); + return MV_FAIL; + } + pad = dq_map_table[idx]; + ddr3_tip_bus_write(0, ACCESS_TYPE_UNICAST, 0, + ACCESS_TYPE_UNICAST, subphy, + DDR_PHY_DATA, + PBS_TX_PHY_REG(cs, pad), + reg_val); + } + + a = dm_lambda[subphy]; + b = dq_pbs_diff * PBS_VAL_FACTOR; + if (b > 0) { + if (round_div(a, b, &c) != MV_OK) + return MV_FAIL; + dq_pbs_diff = (u32)c; + } + + x = (int)ctx_vector[subphy]; + if (x < 0) { + DEBUG_DM_TUNING(DEBUG_LEVEL_ERROR, + ("unexpected negative value found\n")); + return MV_FAIL; + } + y = (int)dq_pbs_diff; + if (y < 0) { + DEBUG_DM_TUNING(DEBUG_LEVEL_ERROR, + ("unexpected negative value found\n")); + return MV_FAIL; + } + x += (y + vw_sphy_hi_diff) / 2; + x %= ADLL_TAPS_PER_PERIOD; + ctx_vector[subphy] = (u32)x; + } else if (((vw_sphy_hi_diff < 0) && (vw_sphy_lo_diff < 0)) || + (loop == 1)) { /* dm is the weakest signal */ + /* update dq and c_opt */ + dm_status[subphy] = LOCKED; + byte_center = (vw_sphy_lo_lmt[subphy] + vw_sphy_hi_lmt[subphy]) / 2; + x = (int)byte_center; + if (x < 0) { + DEBUG_DM_TUNING(DEBUG_LEVEL_ERROR, + ("unexpected negative value found\n")); + return MV_FAIL; + } + x += (vw_sphy_hi_diff - vw_sphy_lo_diff) / 2; + if (x < 0) { + DEBUG_DM_TUNING(DEBUG_LEVEL_ERROR, + ("unexpected negative value found\n")); + return MV_FAIL; + } + dm_center = (u32)x; + + if (byte_center > dm_center) { + max_pbs = 0; + for (dq = 0; dq < BUS_WIDTH_IN_BITS; dq++) { + pad = dq_map_table[dq + subphy * BUS_WIDTH_IN_BITS]; + ddr3_tip_bus_read(0, 0, ACCESS_TYPE_UNICAST, + subphy, DDR_PHY_DATA, + PBS_TX_PHY_REG(cs, pad), + ®_val); + dq_pbs[dq] = reg_val; + a = (byte_center - dm_center) * PBS_VAL_FACTOR; + b = pbs_tap_factor[0][subphy][dq]; + if (round_div(a, b, &c) != MV_OK) + return MV_FAIL; + new_dq_pbs[dq] = dq_pbs[dq] + (u32)c; + if (max_pbs < new_dq_pbs[dq]) + max_pbs = new_dq_pbs[dq]; + } + + dq_pbs_diff = (max_pbs > MAX_PBS_NUM) ? (max_pbs - MAX_PBS_NUM) : 0; + for (int dq = 0; dq < BUS_WIDTH_IN_BITS; dq++) { + idx = dq + subphy * BUS_WIDTH_IN_BITS; + pad = dq_map_table[idx]; + reg_val = new_dq_pbs[dq] - dq_pbs_diff; + if (reg_val < 0) { + DEBUG_DM_TUNING(DEBUG_LEVEL_ERROR, + ("unexpected negative value found\n")); + return MV_FAIL; + } + ddr3_tip_bus_write(0, ACCESS_TYPE_UNICAST, 0, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + PBS_TX_PHY_REG(cs, pad), + reg_val); + } + ctx_vector[subphy] = dm_center % ADLL_TAPS_PER_PERIOD; + } else { + ddr3_tip_bus_read(0, 0, ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + PBS_TX_PHY_REG(cs, dm_pad), &dm_pbs); + a = (dm_center - byte_center) * PBS_VAL_FACTOR; + b = dm_lambda[subphy]; + if (round_div(a, b, &c) != MV_OK) + return MV_FAIL; + dm_pbs += (u32)c; + ddr3_tip_bus_write(0, ACCESS_TYPE_UNICAST, 0, + ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + PBS_TX_PHY_REG(cs, dm_pad), dm_pbs); + } + } else { + /* below is the check whether dm signal per subphy converged or not */ + } + } + } + + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + ddr3_tip_bus_write(0, ACCESS_TYPE_UNICAST, 0, ACCESS_TYPE_UNICAST, subphy, DDR_PHY_DATA, + CTX_PHY_REG(cs), ctx_vector[subphy]); + } + + for (subphy = 0; subphy < subphy_max; subphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy); + if (dm_status[subphy] != LOCKED) { + DEBUG_DM_TUNING(DEBUG_LEVEL_ERROR, + ("no convergence for dm signal[%u] found\n", subphy)); + return MV_FAIL; + } + } + + return MV_OK; +} +void refresh(void) +{ + u32 data_read[MAX_INTERFACE_NUM]; + ddr3_tip_if_read(0, ACCESS_TYPE_UNICAST, 0, ODPG_DATA_CTRL_REG, data_read, MASK_ALL_BITS); + + /* Refresh Command for CS0*/ + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, ODPG_DATA_CTRL_REG, (0 << 26), (3 << 26)); + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, SDRAM_OP_REG, 0xe02, 0xf1f); + if (ddr3_tip_if_polling(0, ACCESS_TYPE_UNICAST, 0, 0, 0x1f, SDRAM_OP_REG, MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("DDR3 poll failed")); + + /* Refresh Command for CS1*/ + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, ODPG_DATA_CTRL_REG, (1 << 26), (3 << 26)); + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, SDRAM_OP_REG, 0xd02, 0xf1f); + if (ddr3_tip_if_polling(0, ACCESS_TYPE_UNICAST, 0, 0, 0x1f, SDRAM_OP_REG, MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("DDR3 poll failed")); + + /* Restore Register*/ + ddr3_tip_if_write(0, ACCESS_TYPE_UNICAST, 0, ODPG_DATA_CTRL_REG, data_read[0] , MASK_ALL_BITS); +} +#endif /* CONFIG_DDR4 */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.h b/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.h new file mode 100644 index 0000000000..da4a866fe9 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#ifndef _MV_DDR4_TRAINING_CALIBRATION_H +#define _MV_DDR4_TRAINING_CALIBRATION_H + +/* vref subphy calibration state */ +enum mv_ddr4_vref_subphy_cal_state { + MV_DDR4_VREF_SUBPHY_CAL_ABOVE, + MV_DDR4_VREF_SUBPHY_CAL_UNDER, + MV_DDR4_VREF_SUBPHY_CAL_INSIDE, + MV_DDR4_VREF_SUBPHY_CAL_END +}; + +/* calibrate DDR4 dq vref (tx) */ +int mv_ddr4_dq_vref_calibration(u8 dev_num, u16 (*pbs_tap_factor)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS]); + +/* calibrate receiver (receiver duty cycle) */ +int mv_ddr4_receiver_calibration(u8 dev_num); + +/* tune dm signal */ +int mv_ddr4_dm_tuning(u32 cs, u16 (*pbs_tap_factor)[MAX_BUS_NUM][BUS_WIDTH_IN_BITS]); + +#endif /* _MV_DDR4_TRAINING_CALIBRATION_H */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_training_db.c b/drivers/ddr/marvell/a38x/mv_ddr4_training_db.c new file mode 100644 index 0000000000..1baa63a2d8 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_training_db.c @@ -0,0 +1,545 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#if defined(CONFIG_DDR4) + +/* DDR4 Training Database */ + +#include "ddr_ml_wrapper.h" + +#include "mv_ddr_topology.h" +#include "mv_ddr_training_db.h" +#include "ddr_topology_def.h" + +/* list of allowed frequencies listed in order of enum mv_ddr_freq */ +static unsigned int freq_val[MV_DDR_FREQ_LAST] = { + 130, /* MV_DDR_FREQ_LOW_FREQ */ + 650, /* MV_DDR_FREQ_650 */ + 666, /* MV_DDR_FREQ_667 */ + 800, /* MV_DDR_FREQ_800 */ + 933, /* MV_DDR_FREQ_933 */ + 1066, /* MV_DDR_FREQ_1066 */ + 900, /* MV_DDR_FREQ_900 */ + 1000, /* MV_DDR_FREQ_1000 */ + 1050, /* MV_DDR_FREQ_1050 */ + 1200, /* MV_DDR_FREQ_1200 */ + 1333, /* MV_DDR_FREQ_1333 */ + 1466, /* MV_DDR_FREQ_1466 */ + 1600 /* MV_DDR_FREQ_1600 */ +}; + +unsigned int *mv_ddr_freq_tbl_get(void) +{ + return &freq_val[0]; +} + +u32 mv_ddr_freq_get(enum mv_ddr_freq freq) +{ + return freq_val[freq]; +} + +/* non-dbi mode - table for cl values per frequency for each speed bin index */ +static struct mv_ddr_cl_val_per_freq cl_table[] = { +/* 130 650 667 800 933 1067 900 1000 1050 1200 1333 1466 1600 FREQ(MHz)*/ +/* 7.69 1.53 1.5 1.25 1.07 0.937 1.11 1 0.95 0.83 0.75 0.68 0.625 TCK(ns)*/ + {{10, 10, 10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600J */ + {{10, 11, 11, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600K */ + {{10, 12, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600L */ + {{10, 12, 12, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866L */ + {{10, 12, 12, 13, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866M */ + {{10, 12, 12, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866N */ + {{10, 10, 10, 12, 14, 14, 14, 14, 14, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2133N */ + {{10, 9, 9, 12, 14, 15, 14, 15, 15, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2133P */ + {{10, 10, 10, 12, 14, 16, 14, 16, 16, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2133R */ + {{10, 10, 10, 12, 14, 16, 14, 16, 16, 18, 0, 0, 0} },/* SPEED_BIN_DDR_2400P */ + {{10, 9, 9, 11, 13, 15, 13, 15, 15, 18, 0, 0, 0} },/* SPEED_BIN_DDR_2400R */ + {{10, 9, 9, 11, 13, 15, 13, 15, 15, 17, 0, 0, 0} },/* SPEED_BIN_DDR_2400T */ + {{10, 10, 10, 12, 14, 16, 14, 16, 16, 18, 0, 0, 0} },/* SPEED_BIN_DDR_2400U */ + {{10, 10, 10, 11, 13, 15, 13, 15, 15, 16, 17, 0, 0} },/* SPEED_BIN_DDR_2666T */ + {{10, 9, 10, 11, 13, 15, 13, 15, 15, 17, 18, 0, 0} },/* SPEED_BIN_DDR_2666U */ + {{10, 9, 10, 12, 14, 16, 14, 16, 16, 18, 19, 0, 0} },/* SPEED_BIN_DDR_2666V */ + {{10, 10, 10, 12, 14, 16, 14, 16, 16, 18, 20, 0, 0} },/* SPEED_BIN_DDR_2666W */ + {{10, 10, 9, 11, 13, 15, 13, 15, 15, 16, 18, 19, 0} },/* SPEED_BIN_DDR_2933V */ + {{10, 9, 10, 11, 13, 15, 13, 15, 15, 17, 19, 20, 0} },/* SPEED_BIN_DDR_2933W */ + {{10, 9, 10, 12, 14, 16, 14, 16, 16, 18, 20, 21, 0} },/* SPEED_BIN_DDR_2933Y */ + {{10, 10, 10, 12, 14, 16, 14, 16, 16, 18, 20, 22, 0} },/* SPEED_BIN_DDR_2933AA*/ + {{10, 10, 9, 11, 13, 15, 13, 15, 15, 16, 18, 20, 20} },/* SPEED_BIN_DDR_3200W */ + {{10, 9, 0, 11, 13, 15, 13, 15, 15, 17, 19, 22, 22} },/* SPEED_BIN_DDR_3200AA*/ + {{10, 9, 10, 12, 14, 16, 14, 16, 16, 18, 20, 24, 24} } /* SPEED_BIN_DDR_3200AC*/ + +}; + +u32 mv_ddr_cl_val_get(u32 index, u32 freq) +{ + return cl_table[index].cl_val[freq]; +} + +/* dbi mode - table for cl values per frequency for each speed bin index */ +struct mv_ddr_cl_val_per_freq cas_latency_table_dbi[] = { +/* 130 650 667 800 933 1067 900 1000 1050 1200 1333 1466 1600 FREQ(MHz)*/ +/* 7.69 1.53 1.5 1.25 1.07 0.937 1.11 1 0.95 0.83 0.75 0.68 0.625 TCK(ns)*/ + {{0, 12, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600J */ + {{0, 13, 13, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600K */ + {{0, 14, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600L */ + {{0, 14, 14, 14, 0, 0, 14, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866L */ + {{0, 14, 14, 15, 0, 0, 15, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866M */ + {{0, 14, 14, 16, 0, 0, 16, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866N */ + {{0, 12, 12, 14, 16, 17, 14, 17, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2133N */ + {{0, 11, 11, 14, 16, 18, 14, 18, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2133P */ + {{0, 12, 12, 14, 16, 19, 14, 19, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2133R */ + {{0, 12, 12, 14, 16, 19, 14, 19, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2400P */ + {{0, 11, 11, 13, 15, 18, 13, 18, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2400R */ + {{0, 11, 11, 13, 15, 18, 13, 18, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2400T */ + {{0, 12, 12, 14, 16, 19, 14, 19, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_2400U */ + {{10, 10, 11, 13, 15, 18, 13, 18, 18, 19, 20, 0, 0} },/* SPEED_BIN_DDR_2666T */ + {{10, 9, 11, 13, 15, 18, 13, 18, 18, 20, 21, 0, 0} },/* SPEED_BIN_DDR_2666U */ + {{10, 9, 12, 14, 16, 19, 14, 19, 19, 21, 22, 0, 0} },/* SPEED_BIN_DDR_2666V */ + {{10, 10, 12, 14, 16, 19, 14, 19, 19, 21, 23, 0, 0} },/* SPEED_BIN_DDR_2666W */ + {{10, 10, 11, 13, 15, 18, 15, 18, 18, 19, 21, 23, 0} },/* SPEED_BIN_DDR_2933V */ + {{10, 9, 12, 13, 15, 18, 15, 18, 18, 20, 22, 24, 0} },/* SPEED_BIN_DDR_2933W */ + {{10, 9, 12, 14, 16, 19, 16, 19, 19, 21, 23, 26, 0} },/* SPEED_BIN_DDR_2933Y */ + {{10, 10, 12, 14, 16, 19, 16, 19, 19, 21, 23, 26, 0} },/* SPEED_BIN_DDR_2933AA*/ + {{10, 10, 11, 13, 15, 18, 15, 18, 18, 19, 21, 24, 24} },/* SPEED_BIN_DDR_3200W */ + {{10, 9, 0, 13, 15, 18, 15, 18, 18, 20, 22, 26, 26} },/* SPEED_BIN_DDR_3200AA*/ + {{10, 9, 12, 14, 16, 19, 16, 19, 19, 21, 23, 28, 28} } /* SPEED_BIN_DDR_3200AC*/ +}; + +/* table for cwl values per speed bin index */ +static struct mv_ddr_cl_val_per_freq cwl_table[] = { +/* 130 650 667 800 933 1067 900 1000 1050 1200 1333 1466 1600 FREQ(MHz)*/ +/* 7.69 1.53 1.5 1.25 1.07 0.937 1.11 1 0.95 0.83 0.75 0.68 0.625 TCK(ns)*/ + {{9, 9, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600J */ + {{9, 9, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600K */ + {{9, 9, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1600L */ + {{9, 9, 9, 10, 0, 0, 10, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866L */ + {{9, 9, 9, 10, 0, 0, 10, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866M */ + {{9, 9, 9, 10, 0, 0, 10, 0, 0, 0, 0, 0, 0} },/* SPEED_BIN_DDR_1866N */ + {{9, 9, 9, 9, 10, 11, 10, 11, 10, 11, 0, 0, 0} },/* SPEED_BIN_DDR_2133N */ + {{9, 9, 9, 9, 10, 11, 10, 11, 10, 11, 0, 0, 0} },/* SPEED_BIN_DDR_2133P */ + {{9, 9, 9, 10, 10, 11, 10, 11, 10, 11, 0, 0, 0} },/* SPEED_BIN_DDR_2133R */ + {{9, 9, 9, 9, 10, 11, 10, 11, 10, 12, 0, 0, 0} },/* SPEED_BIN_DDR_2400P */ + {{9, 9, 9, 9, 10, 11, 10, 11, 10, 12, 0, 0, 0} },/* SPEED_BIN_DDR_2400R */ + {{9, 9, 9, 9, 10, 11, 10, 11, 10, 12, 0, 0, 0} },/* SPEED_BIN_DDR_2400T */ + {{9, 9, 9, 9, 10, 11, 10, 11, 10, 12, 0, 0, 0} },/* SPEED_BIN_DDR_2400U */ + {{10, 10, 9, 9, 10, 11, 10, 11, 11, 12, 14, 0, 0} },/* SPEED_BIN_DDR_2666T */ + {{10, 9, 9, 9, 10, 11, 10, 11, 11, 12, 14, 0, 0} },/* SPEED_BIN_DDR_2666U */ + {{10, 9, 9, 9, 10, 11, 10, 11, 11, 12, 14, 0, 0} },/* SPEED_BIN_DDR_2666V */ + {{10, 10, 9, 9, 10, 11, 10, 11, 11, 12, 14, 0, 0} },/* SPEED_BIN_DDR_2666W */ + {{10, 10, 9, 9, 10, 11, 10, 11, 11, 12, 14, 16, 0} },/* SPEED_BIN_DDR_2933V */ + {{10, 9, 9, 9, 10, 11, 10, 11, 11, 12, 14, 16, 0} },/* SPEED_BIN_DDR_2933W */ + {{10, 9, 9, 9, 10, 11, 10, 11, 11, 12, 14, 16, 0} },/* SPEED_BIN_DDR_2933Y */ + {{10, 10, 9, 9, 10, 11, 10, 11, 11, 12, 14, 16, 0} },/* SPEED_BIN_DDR_2933AA*/ + {{10, 10, 9, 9, 10, 11, 10, 11, 11, 12, 14, 16, 16} },/* SPEED_BIN_DDR_3200W */ + {{10, 9, 9, 9, 10, 11, 10, 11, 11, 12, 14, 16, 16} },/* SPEED_BIN_DDR_3200AA*/ + {{10, 9, 9, 9, 10, 11, 10, 11, 11, 12, 14, 16, 16} } /* SPEED_BIN_DDR_3200AC*/ +}; + +u32 mv_ddr_cwl_val_get(u32 index, u32 freq) +{ + return cwl_table[index].cl_val[freq]; +} + +/* + * rfc values, ns + * note: values per JEDEC speed bin 1866; TODO: check it + */ +static unsigned int rfc_table[] = { + 0, /* placholder */ + 0, /* placholder */ + 160, /* 2G */ + 260, /* 4G */ + 350, /* 8G */ + 0, /* TODO: placeholder for 16-Mbit die capacity */ + 0, /* TODO: placeholder for 32-Mbit die capacity*/ + 0, /* TODO: placeholder for 12-Mbit die capacity */ + 0 /* TODO: placeholder for 24-Mbit die capacity */ +}; + +u32 mv_ddr_rfc_get(u32 mem) +{ + return rfc_table[mem]; +} + +u16 rtt_table[] = { + 0xffff, + 60, + 120, + 40, + 240, + 48, + 80, + 34 +}; + +u8 twr_mask_table[] = { + 0xa, + 0xa, + 0xa, + 0xa, + 0xa, + 0xa, + 0xa, + 0xa, + 0xa, + 0xa, + 0x0, /* 10 */ + 0xa, + 0x1, /* 12 */ + 0xa, + 0x2, /* 14 */ + 0xa, + 0x3, /* 16 */ + 0xa, + 0x4, /* 18 */ + 0xa, + 0x5, /* 20 */ + 0xa, + 0xa, /* 22 */ + 0xa, + 0x6 /* 24 */ +}; + +u8 cl_mask_table[] = { + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x1, /* 10 */ + 0x2, + 0x3, /* 12 */ + 0x4, + 0x5, /* 14 */ + 0x6, + 0x7, /* 16 */ + 0xd, + 0x8, /* 18 */ + 0x0, + 0x9, /* 20 */ + 0x0, + 0xa, /* 22 */ + 0x0, + 0xb /* 24 */ +}; + +u8 cwl_mask_table[] = { + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x1, /* 10 */ + 0x2, + 0x3, /* 12 */ + 0x0, + 0x4, /* 14 */ + 0x0, + 0x5, /* 16 */ + 0x0, + 0x6 /* 18 */ +}; + +u32 speed_bin_table_t_rcd_t_rp[] = { + 12500, + 13750, + 15000, + 12850, + 13920, + 15000, + 13130, + 14060, + 15000, + 12500, + 13320, + 14160, + 15000, + 12750, + 13500, + 14250, + 15000, + 12960, + 13640, + 14320, + 15000, + 12500, + 13750, + 15000 +}; + +u32 speed_bin_table_t_rc[] = { + 47500, + 48750, + 50000, + 46850, + 47920, + 49000, + 46130, + 47060, + 48000, + 44500, + 45320, + 46160, + 47000, + 44750, + 45500, + 46250, + 47000, + 44960, + 45640, + 46320, + 47000, + 44500, + 45750, + 47000 +}; + +static struct mv_ddr_page_element page_tbl[] = { + /* 8-bit, 16-bit page size */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 512M */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 1G */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 2G */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 4G */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 8G */ + {0, 0}, /* TODO: placeholder for 16-Mbit die capacity */ + {0, 0}, /* TODO: placeholder for 32-Mbit die capacity */ + {0, 0}, /* TODO: placeholder for 12-Mbit die capacity */ + {0, 0} /* TODO: placeholder for 24-Mbit die capacity */ +}; + +u32 mv_ddr_page_size_get(enum mv_ddr_dev_width bus_width, enum mv_ddr_die_capacity mem_size) +{ + if (bus_width == MV_DDR_DEV_WIDTH_8BIT) + return page_tbl[mem_size].page_size_8bit; + else + return page_tbl[mem_size].page_size_16bit; +} + +/* DLL locking time, tDLLK */ +#define MV_DDR_TDLLK_DDR4_1600 597 +#define MV_DDR_TDLLK_DDR4_1866 597 +#define MV_DDR_TDLLK_DDR4_2133 768 +#define MV_DDR_TDLLK_DDR4_2400 768 +#define MV_DDR_TDLLK_DDR4_2666 854 +#define MV_DDR_TDLLK_DDR4_2933 940 +#define MV_DDR_TDLLK_DDR4_3200 1024 +static int mv_ddr_tdllk_get(unsigned int freq, unsigned int *tdllk) +{ + if (freq >= 1600) + *tdllk = MV_DDR_TDLLK_DDR4_3200; + else if (freq >= 1466) + *tdllk = MV_DDR_TDLLK_DDR4_2933; + else if (freq >= 1333) + *tdllk = MV_DDR_TDLLK_DDR4_2666; + else if (freq >= 1200) + *tdllk = MV_DDR_TDLLK_DDR4_2400; + else if (freq >= 1066) + *tdllk = MV_DDR_TDLLK_DDR4_2133; + else if (freq >= 933) + *tdllk = MV_DDR_TDLLK_DDR4_1866; + else if (freq >= 800) + *tdllk = MV_DDR_TDLLK_DDR4_1600; + else { + printf("error: %s: unsupported data rate found\n", __func__); + return -1; + } + + return 0; +} + +/* return speed bin value for selected index and element */ +unsigned int mv_ddr_speed_bin_timing_get(enum mv_ddr_speed_bin index, enum mv_ddr_speed_bin_timing element) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int freq; + u32 result = 0; + + /* get frequency in MHz */ + freq = mv_ddr_freq_get(tm->interface_params[0].memory_freq); + + switch (element) { + case SPEED_BIN_TRCD: + case SPEED_BIN_TRP: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TRCD_MIN]; + else + result = speed_bin_table_t_rcd_t_rp[index]; + break; + case SPEED_BIN_TRAS: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TRAS_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 35000; + else if (index <= SPEED_BIN_DDR_1866N) + result = 34000; + else if (index <= SPEED_BIN_DDR_2133R) + result = 33000; + else + result = 32000; + } + break; + case SPEED_BIN_TRC: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TRC_MIN]; + else + result = speed_bin_table_t_rc[index]; + break; + case SPEED_BIN_TRRD0_5K: + case SPEED_BIN_TRRD1K: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TRRD_S_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 5000; + else if (index <= SPEED_BIN_DDR_1866N) + result = 4200; + else if (index <= SPEED_BIN_DDR_2133R) + result = 3700; + else if (index <= SPEED_BIN_DDR_2400U) + result = 3500; + else if (index <= SPEED_BIN_DDR_2666W) + result = 3000; + else if (index <= SPEED_BIN_DDR_2933AA) + result = 2700; + else + result = 2500; + } + break; + case SPEED_BIN_TRRD2K: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TRRD_S_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 6000; + else + result = 5300; + } + + break; + case SPEED_BIN_TRRDL0_5K: + case SPEED_BIN_TRRDL1K: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TRRD_L_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 6000; + else if (index <= SPEED_BIN_DDR_2133R) + result = 5300; + else + result = 4900; + } + break; + case SPEED_BIN_TRRDL2K: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TRRD_L_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 7500; + else + result = 6400; + } + break; + case SPEED_BIN_TPD: + result = 5000; + break; + case SPEED_BIN_TFAW0_5K: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TFAW_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 20000; + else if (index <= SPEED_BIN_DDR_1866N) + result = 17000; + else if (index <= SPEED_BIN_DDR_2133R) + result = 15000; + else if (index <= SPEED_BIN_DDR_2400U) + result = 13000; + else if (index <= SPEED_BIN_DDR_2666W) + result = 12000; + else if (index <= SPEED_BIN_DDR_2933AA) + result = 10875; + else + result = 10000; + } + break; + case SPEED_BIN_TFAW1K: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TFAW_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 25000; + else if (index <= SPEED_BIN_DDR_1866N) + result = 23000; + else + result = 21000; + } + break; + case SPEED_BIN_TFAW2K: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TFAW_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 35000; + else + result = 30000; + } + break; + case SPEED_BIN_TWTR: + result = 2500; + /* FIXME: wa: set twtr_s to a default value, if it's unset on spd */ + if (tm->cfg_src == MV_DDR_CFG_SPD && tm->timing_data[MV_DDR_TWTR_S_MIN]) + result = tm->timing_data[MV_DDR_TWTR_S_MIN]; + break; + case SPEED_BIN_TWTRL: + case SPEED_BIN_TRTP: + result = 7500; + /* FIXME: wa: set twtr_l to a default value, if it's unset on spd */ + if (tm->cfg_src == MV_DDR_CFG_SPD && tm->timing_data[MV_DDR_TWTR_L_MIN]) + result = tm->timing_data[MV_DDR_TWTR_L_MIN]; + break; + case SPEED_BIN_TWR: + case SPEED_BIN_TMOD: + result = 15000; + /* FIXME: wa: set twr to a default value, if it's unset on spd */ + if (tm->cfg_src == MV_DDR_CFG_SPD && tm->timing_data[MV_DDR_TWR_MIN]) + result = tm->timing_data[MV_DDR_TWR_MIN]; + break; + case SPEED_BIN_TXPDLL: + result = 24000; + break; + case SPEED_BIN_TXSDLL: + if (mv_ddr_tdllk_get(freq, &result)) + result = 0; + break; + case SPEED_BIN_TCCDL: + if (tm->cfg_src == MV_DDR_CFG_SPD) + result = tm->timing_data[MV_DDR_TCCD_L_MIN]; + else { + if (index <= SPEED_BIN_DDR_1600L) + result = 6250; + else if (index <= SPEED_BIN_DDR_2133R) + result = 5355; + else + result = 5000; + } + break; + default: + printf("error: %s: invalid element [%d] found\n", __func__, (int)element); + break; + } + + return result; +} +#endif /* CONFIG_DDR4 */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_training_leveling.c b/drivers/ddr/marvell/a38x/mv_ddr4_training_leveling.c new file mode 100644 index 0000000000..6d5b942fa1 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_training_leveling.c @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#if defined(CONFIG_DDR4) + +#include "ddr3_init.h" +#include "mv_ddr_regs.h" + +static int mv_ddr4_dynamic_pb_wl_supp(u32 dev_num, enum mv_wl_supp_mode ecc_mode); + +/* compare test for ddr4 write leveling supplementary */ +#define MV_DDR4_COMP_TEST_NO_RESULT 0 +#define MV_DDR4_COMP_TEST_RESULT_0 1 +#define MV_DDR4_XSB_COMP_PATTERNS_NUM 8 + +static u8 mv_ddr4_xsb_comp_test(u32 dev_num, u32 subphy_num, u32 if_id, + enum mv_wl_supp_mode ecc_mode) +{ + u32 wl_invert; + u8 pb_key, bit, bit_max, word; + struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + u32 subphy_max = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE); + uint64_t read_pattern_64[MV_DDR4_XSB_COMP_PATTERNS_NUM] = {0}; + /* + * FIXME: the pattern below is used for writing to the memory + * by the cpu. it was changed to be written through the odpg. + * for a workaround + * uint64_t pattern_test_table_64[MV_DDR4_XSB_COMP_PATTERNS_NUM] = { + * 0xffffffffffffffff, + * 0xffffffffffffffff, + * 0x0000000000000000, + * 0x0000000000000000, + * 0x0000000000000000, + * 0x0000000000000000, + * 0xffffffffffffffff, + * 0xffffffffffffffff}; + */ + u32 read_pattern[MV_DDR4_XSB_COMP_PATTERNS_NUM]; + /*u32 pattern_test_table[MV_DDR4_XSB_COMP_PATTERNS_NUM] = { + 0xffffffff, + 0xffffffff, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0xffffffff, + 0xffffffff}; TODO: use pattern_table_get_word */ + int i, status; + uint64_t data64; + uintptr_t addr64; + int ecc_running = 0; + u32 ecc_read_subphy_num = 0; /* FIXME: change ecc read subphy num to be configurable */ + u8 bit_counter = 0; + int edge = 0; + /* write and read data */ + if (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask)) { + status = ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG, + effective_cs << ODPG_DATA_CS_OFFS, + ODPG_DATA_CS_MASK << ODPG_DATA_CS_OFFS); + if (status != MV_OK) + return status; + + addr64 = (uintptr_t)pattern_table[PATTERN_TEST].start_addr; + /* + * FIXME: changed the load pattern to memory through the odpg + * this change is needed to be validate + * this change is done due to un calibrated dm at this stage + * the below code is the code for loading the pattern directly + * to the memory + * + * for (i = 0; i < MV_DDR4_XSB_COMP_PATTERNS_NUM; i++) { + * data64 = pattern_test_table_64[i]; + * writeq(addr64, data64); + * addr64 += sizeof(uint64_t); + *} + * FIXME: the below code loads the pattern to the memory through the odpg + * it loads it twice to due supplementary failure, need to check it + */ + int j; + for (j = 0; j < 2; j++) + ddr3_tip_load_pattern_to_mem(dev_num, PATTERN_TEST); + + } else if (MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(tm->bus_act_mask, subphy_max)) { + status = ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG, + effective_cs << ODPG_DATA_CS_OFFS, + ODPG_DATA_CS_MASK << ODPG_DATA_CS_OFFS); + if (status != MV_OK) + return status; + + /* + * FIXME: changed the load pattern to memory through the odpg + * this change is needed to be validate + * this change is done due to un calibrated dm at this stage + * the below code is the code for loading the pattern directly + * to the memory + */ + int j; + for (j = 0; j < 2; j++) + ddr3_tip_load_pattern_to_mem(dev_num, PATTERN_TEST); + } else { + /* + * FIXME: changed the load pattern to memory through the odpg + * this change is needed to be validate + * this change is done due to un calibrated dm at this stage + * the below code is the code for loading the pattern directly + * to the memory + */ + int j; + for (j = 0; j < 2; j++) + ddr3_tip_load_pattern_to_mem(dev_num, PATTERN_TEST); + } + + if ((ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4) || + (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3 || + ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8)) { + /* disable ecc write mux */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x0, 0x100); + if (status != MV_OK) + return status; + + /* enable read data ecc mux */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x3, 0x3); + if (status != MV_OK) + return status; + + /* unset training start bit */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_REG, 0x80000000, 0x80000000); + if (status != MV_OK) + return status; + + ecc_running = 1; + ecc_read_subphy_num = ECC_READ_BUS_0; + } + + if (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask)) { + status = ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG, + effective_cs << ODPG_DATA_CS_OFFS, + ODPG_DATA_CS_MASK << ODPG_DATA_CS_OFFS); + if (status != MV_OK) + return status; + /* + * in case of reading the pattern read it from the address x 8 + * the odpg multiply by 8 the addres to read from + */ + addr64 = ((uintptr_t)pattern_table[PATTERN_TEST].start_addr) << 3; + for (i = 0; i < MV_DDR4_XSB_COMP_PATTERNS_NUM; i++) { + data64 = readq(addr64); + addr64 += sizeof(uint64_t); + read_pattern_64[i] = data64; + } + + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("xsb comp: if %d bus id %d\n", 0, subphy_num)); + for (edge = 0; edge < 8; edge++) + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("0x%16llx\n", (unsigned long long)read_pattern_64[edge])); + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("\n")); + } else if (MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(tm->bus_act_mask, subphy_max)) { + status = ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG, + effective_cs << ODPG_DATA_CS_OFFS, + ODPG_DATA_CS_MASK << ODPG_DATA_CS_OFFS); + if (status != MV_OK) + return status; + + status = ddr3_tip_ext_read(dev_num, if_id, pattern_table[PATTERN_TEST].start_addr << 3, + 1, read_pattern); + if (status != MV_OK) + return status; + + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("xsb comp: if %d bus id %d\n", 0, subphy_num)); + for (edge = 0; edge < 8; edge++) + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("0x%16x\n", read_pattern[edge])); + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("\n")); + } else { + status = ddr3_tip_ext_read(dev_num, if_id, ((pattern_table[PATTERN_TEST].start_addr << 3) + + ((SDRAM_CS_SIZE + 1) * effective_cs)), 1, read_pattern); + if (status != MV_OK) + return status; + + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("xsb comp: if %d bus id %d\n", 0, subphy_num)); + for (edge = 0; edge < 8; edge++) + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("0x%16x\n", read_pattern[edge])); + DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("\n")); + } + + /* read centralization result to decide on half phase by inverse bit */ + status = ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, subphy_num, DDR_PHY_DATA, + CTX_PHY_REG(0), &wl_invert); + if (status != MV_OK) + return status; + + if ((wl_invert & 0x20) != 0) + wl_invert = 1; + else + wl_invert = 0; + + /* for ecc, read from the "read" subphy (usualy subphy 0) */ + if (ecc_running) + subphy_num = ecc_read_subphy_num; + + /* per bit loop*/ + bit_max = subphy_num * BUS_WIDTH_IN_BITS + BUS_WIDTH_IN_BITS; + for (bit = subphy_num * BUS_WIDTH_IN_BITS; bit < bit_max; bit++) { + /* get per bit pattern key (value of the same bit in the pattern) */ + pb_key = 0; + for (word = 0; word < MV_DDR4_XSB_COMP_PATTERNS_NUM; word++) { + if (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask)) { + if ((read_pattern_64[word] & ((uint64_t)1 << bit)) != 0) + pb_key |= (1 << word); + } else { + if ((read_pattern[word] & (1 << bit)) != 0) + pb_key |= (1 << word); + } + } + + /* find the key value and make decision */ + switch (pb_key) { + /* case(s) for 0 */ + case 0b11000011: /* nominal */ + case 0b10000011: /* sample at start of UI sample at the dqvref TH */ + case 0b10000111: /* sample at start of UI sample at the dqvref TH */ + case 0b11000001: /* sample at start of UI sample at the dqvref TH */ + case 0b11100001: /* sample at start of UI sample at the dqvref TH */ + case 0b11100011: /* sample at start of UI sample at the dqvref TH */ + case 0b11000111: /* sample at start of UI sample at the dqvref TH */ + bit_counter++; + break; + } /* end of switch */ + } /* end of per bit loop */ + + /* check all bits in the current subphy has met the switch condition above */ + if (bit_counter == BUS_WIDTH_IN_BITS) + return MV_DDR4_COMP_TEST_RESULT_0; + else { + DEBUG_LEVELING( + DEBUG_LEVEL_INFO, + ("different supplementary results (%d -> %d)\n", + MV_DDR4_COMP_TEST_NO_RESULT, MV_DDR4_COMP_TEST_RESULT_0)); + return MV_DDR4_COMP_TEST_NO_RESULT; + } +} + +int mv_ddr4_dynamic_wl_supp(u32 dev_num) +{ + int status = MV_OK; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + + if (DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask) || + DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask) || + DDR3_IS_ECC_PUP8_MODE(tm->bus_act_mask)) { + if (DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask)) + status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4); + else if (DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask)) + status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3); + else /* WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8 */ + status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8); + if (status != MV_OK) + return status; + status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_ECC_MODE_DATA_PUPS); + } else { /* regular supplementary for data subphys in non-ecc mode */ + status = mv_ddr4_dynamic_pb_wl_supp(dev_num, WRITE_LEVELING_SUPP_REG_MODE); + } + + return status; +} + +/* dynamic per bit write leveling supplementary */ +static int mv_ddr4_dynamic_pb_wl_supp(u32 dev_num, enum mv_wl_supp_mode ecc_mode) +{ + u32 if_id; + u32 subphy_start, subphy_end; + u32 subphy_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); + u8 compare_result = 0; + u32 orig_phase; + u32 rd_data, wr_data = 0; + u32 flag, step; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + u32 ecc_phy_access_id; + int status; + + if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4 || + ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3 || + ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8) { + /* enable ecc write mux */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x100, 0x100); + if (status != MV_OK) + return status; + + /* disable read data ecc mux */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x0, 0x3); + if (status != MV_OK) + return status; + + /* unset training start bit */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_REG, 0x0, 0x80000000); + if (status != MV_OK) + return status; + + if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3) + ecc_phy_access_id = ECC_PHY_ACCESS_3; + else if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4) + ecc_phy_access_id = ECC_PHY_ACCESS_4; + else /* ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8 */ + ecc_phy_access_id = ECC_PHY_ACCESS_8; + + subphy_start = ecc_phy_access_id; + subphy_end = subphy_start + 1; + } else if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_DATA_PUPS) { + /* disable ecc write mux */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x0, 0x100); + if (status != MV_OK) + return status; + + /* disable ecc mode*/ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + SDRAM_CFG_REG, 0, 0x40000); + if (status != MV_OK) + return status; + + subphy_start = 0; + if (MV_DDR_IS_HALF_BUS_DRAM_MODE(tm->bus_act_mask, subphy_num)) + subphy_end = (subphy_num - 1) / 2; + else + subphy_end = subphy_num - 1; + } else { /* ecc_mode == WRITE_LEVELING_SUPP_REG_MODE */ + subphy_start = 0; + /* remove ecc subphy prior to algorithm's start */ + subphy_end = subphy_num - 1; /* TODO: check it */ + } + + for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { + VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); + for (subphy_num = subphy_start; subphy_num < subphy_end; subphy_num++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, subphy_num); + flag = 1; + step = 0; + status = ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, subphy_num, DDR_PHY_DATA, + WL_PHY_REG(effective_cs), &rd_data); + if (status != MV_OK) + return status; + orig_phase = (rd_data >> 6) & 0x7; + while (flag != 0) { + /* get decision for subphy */ + compare_result = mv_ddr4_xsb_comp_test(dev_num, subphy_num, if_id, ecc_mode); + if (compare_result == MV_DDR4_COMP_TEST_RESULT_0) { + flag = 0; + } else { /* shift phase to -1 */ + step++; + if (step == 1) { /* set phase (0x0[6-8]) to -2 */ + if (orig_phase > 1) + wr_data = (rd_data & ~0x1c0) | ((orig_phase - 2) << 6); + else if (orig_phase == 1) + wr_data = (rd_data & ~0x1df); + if (orig_phase >= 1) + ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, subphy_num, + DDR_PHY_DATA, + WL_PHY_REG(effective_cs), wr_data); + } else if (step == 2) { /* shift phase to +1 */ + if (orig_phase <= 5) { + wr_data = (rd_data & ~0x1c0) | ((orig_phase + 2) << 6); + ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, subphy_num, + DDR_PHY_DATA, + WL_PHY_REG(effective_cs), wr_data); + } + } else if (step == 3) { + if (orig_phase <= 3) { + wr_data = (rd_data & ~0x1c0) | ((orig_phase + 4) << 6); + ddr3_tip_bus_write(dev_num, ACCESS_TYPE_UNICAST, if_id, + ACCESS_TYPE_UNICAST, subphy_num, + DDR_PHY_DATA, + WL_PHY_REG(effective_cs), wr_data); + } + } else { /* error */ + flag = 0; + compare_result = MV_DDR4_COMP_TEST_NO_RESULT; + training_result[training_stage][if_id] = TEST_FAILED; + } + } + } + } + if ((training_result[training_stage][if_id] == NO_TEST_DONE) || + (training_result[training_stage][if_id] == TEST_SUCCESS)) + training_result[training_stage][if_id] = TEST_SUCCESS; + } + + if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_DATA_PUPS) { + /* enable ecc write mux */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x100, 0x100); + if (status != MV_OK) + return status; + + /* enable ecc mode*/ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + SDRAM_CFG_REG, 0x40000, 0x40000); + if (status != MV_OK) + return status; + } else if (ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP4 || + ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP3 || + ecc_mode == WRITE_LEVELING_SUPP_ECC_MODE_ECC_PUP8) { + /* enable ecc write mux */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x100, 0x100); + if (status != MV_OK) + return status; + + /* disable read data ecc mux */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_2_REG, 0x0, 0x3); + if (status != MV_OK) + return status; + + /* unset training start bit */ + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_REG, 0x0, 0x80000000); + if (status != MV_OK) + return status; + + status = ddr3_tip_if_write(dev_num, ACCESS_TYPE_UNICAST, PARAM_NOT_CARE, + TRAINING_SW_1_REG, 0x1 << 16, 0x1 << 16); + if (status != MV_OK) + return status; + } else { + /* do nothing for WRITE_LEVELING_SUPP_REG_MODE */; + } + if (training_result[training_stage][0] == TEST_SUCCESS) + return MV_OK; + else + return MV_FAIL; +} +#endif /* CONFIG_DDR4 */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr4_training_leveling.h b/drivers/ddr/marvell/a38x/mv_ddr4_training_leveling.h new file mode 100644 index 0000000000..4067cac968 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr4_training_leveling.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#ifndef _MV_DDR4_TRAINING_LEVELING_H +#define _MV_DDR4_TRAINING_LEVELING_H + +int mv_ddr4_dynamic_wl_supp(u32 dev_num); + +#endif /* _MV_DDR4_TRAINING_LEVELING_H */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c index 7c7bce73a3..6e7949ac72 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c +++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c @@ -38,6 +38,24 @@ #define TSEN_STATUS_TEMP_OUT_OFFSET 0 #define TSEN_STATUS_TEMP_OUT_MASK (0x3ff << TSEN_STATUS_TEMP_OUT_OFFSET) +#if defined(CONFIG_DDR4) +static struct dlb_config ddr3_dlb_config_table[] = { + {DLB_CTRL_REG, 0x2000005f}, + {DLB_BUS_OPT_WT_REG, 0x00880000}, + {DLB_AGING_REG, 0x3f7f007f}, + {DLB_EVICTION_CTRL_REG, 0x0000129f}, + {DLB_EVICTION_TIMERS_REG, 0x00ff0000}, + {DLB_WTS_DIFF_CS_REG, 0x04030803}, + {DLB_WTS_DIFF_BG_REG, 0x00000A02}, + {DLB_WTS_SAME_BG_REG, 0x08000901}, + {DLB_WTS_CMDS_REG, 0x00020005}, + {DLB_WTS_ATTR_PRIO_REG, 0x00060f10}, + {DLB_QUEUE_MAP_REG, 0x00000543}, + {DLB_SPLIT_REG, 0x0000000f}, + {DLB_USER_CMD_REG, 0x00000000}, + {0x0, 0x0} +}; +#else /* !CONFIG_DDR4 */ static struct dlb_config ddr3_dlb_config_table[] = { {DLB_CTRL_REG, 0x2000005c}, {DLB_BUS_OPT_WT_REG, 0x00880000}, @@ -54,6 +72,7 @@ static struct dlb_config ddr3_dlb_config_table[] = { {DLB_USER_CMD_REG, 0x00000000}, {0x0, 0x0} }; +#endif /* CONFIG_DDR4 */ static struct dlb_config *sys_env_dlb_config_ptr_get(void) { @@ -62,12 +81,18 @@ static struct dlb_config *sys_env_dlb_config_ptr_get(void) static u8 a38x_bw_per_freq[MV_DDR_FREQ_LAST] = { 0x3, /* MV_DDR_FREQ_100 */ +#if !defined(CONFIG_DDR4) 0x4, /* MV_DDR_FREQ_400 */ 0x4, /* MV_DDR_FREQ_533 */ +#endif /* CONFIG_DDR4 */ 0x5, /* MV_DDR_FREQ_667 */ 0x5, /* MV_DDR_FREQ_800 */ 0x5, /* MV_DDR_FREQ_933 */ 0x5, /* MV_DDR_FREQ_1066 */ +#if defined(CONFIG_DDR4) + 0x5, /*MV_DDR_FREQ_900*/ + 0x5, /*MV_DDR_FREQ_1000*/ +#else /* CONFIG_DDR4 */ 0x3, /* MV_DDR_FREQ_311 */ 0x3, /* MV_DDR_FREQ_333 */ 0x4, /* MV_DDR_FREQ_467 */ @@ -77,16 +102,23 @@ static u8 a38x_bw_per_freq[MV_DDR_FREQ_LAST] = { 0x5, /* MV_DDR_FREQ_900 */ 0x3, /* MV_DDR_FREQ_360 */ 0x5 /* MV_DDR_FREQ_1000 */ +#endif /* CONFIG_DDR4 */ }; static u8 a38x_rate_per_freq[MV_DDR_FREQ_LAST] = { 0x1, /* MV_DDR_FREQ_100 */ +#if !defined(CONFIG_DDR4) 0x2, /* MV_DDR_FREQ_400 */ 0x2, /* MV_DDR_FREQ_533 */ +#endif /* CONFIG_DDR4 */ 0x2, /* MV_DDR_FREQ_667 */ 0x2, /* MV_DDR_FREQ_800 */ 0x3, /* MV_DDR_FREQ_933 */ 0x3, /* MV_DDR_FREQ_1066 */ +#ifdef CONFIG_DDR4 + 0x2, /*MV_DDR_FREQ_900*/ + 0x2, /*MV_DDR_FREQ_1000*/ +#else /* CONFIG_DDR4 */ 0x1, /* MV_DDR_FREQ_311 */ 0x1, /* MV_DDR_FREQ_333 */ 0x2, /* MV_DDR_FREQ_467 */ @@ -96,6 +128,7 @@ static u8 a38x_rate_per_freq[MV_DDR_FREQ_LAST] = { 0x2, /* MV_DDR_FREQ_900 */ 0x1, /* MV_DDR_FREQ_360 */ 0x2 /* MV_DDR_FREQ_1000 */ +#endif /* CONFIG_DDR4 */ }; static u16 a38x_vco_freq_per_sar_ref_clk_25_mhz[] = { @@ -166,6 +199,54 @@ static u16 a38x_vco_freq_per_sar_ref_clk_40_mhz[] = { 1800 /* 30 - 0x1E */ }; +#if defined(CONFIG_DDR4) +u16 odt_slope[] = { + 21443, + 1452, + 482, + 240, + 141, + 90, + 67, + 52 +}; + +u16 odt_intercept[] = { + 1517, + 328, + 186, + 131, + 100, + 80, + 69, + 61 +}; + +/* Map of scratch PHY registers used to store stability value */ +u32 dmin_phy_reg_table[MAX_BUS_NUM * MAX_CS_NUM][2] = { + /* subphy, addr */ + {0, 0xc0}, /* cs 0, subphy 0 */ + {0, 0xc1}, /* cs 0, subphy 1 */ + {0, 0xc2}, /* cs 0, subphy 2 */ + {0, 0xc3}, /* cs 0, subphy 3 */ + {0, 0xc4}, /* cs 0, subphy 4 */ + {1, 0xc0}, /* cs 1, subphy 0 */ + {1, 0xc1}, /* cs 1, subphy 1 */ + {1, 0xc2}, /* cs 1, subphy 2 */ + {1, 0xc3}, /* cs 1, subphy 3 */ + {1, 0xc4}, /* cs 1, subphy 4 */ + {2, 0xc0}, /* cs 2, subphy 0 */ + {2, 0xc1}, /* cs 2, subphy 1 */ + {2, 0xc2}, /* cs 2, subphy 2 */ + {2, 0xc3}, /* cs 2, subphy 3 */ + {2, 0xc4}, /* cs 2, subphy 4 */ + {0, 0xc5}, /* cs 3, subphy 0 */ + {1, 0xc5}, /* cs 3, subphy 1 */ + {2, 0xc5}, /* cs 3, subphy 2 */ + {0, 0xc6}, /* cs 3, subphy 3 */ + {1, 0xc6} /* cs 3, subphy 4 */ +}; +#endif /* CONFIG_DDR4 */ static u32 dq_bit_map_2_phy_pin[] = { 1, 0, 2, 6, 9, 8, 3, 7, /* 0 */ @@ -397,6 +478,7 @@ static int mv_ddr_sar_freq_get(int dev_num, enum mv_ddr_freq *freq) if (((ref_clk_satr >> DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_OFFSET) & 0x1) == DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_25MHZ) { switch (reg) { +#if !defined(CONFIG_DDR4) case 0x1: DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR, ("Warning: Unsupported freq mode for 333Mhz configured(%d)\n", @@ -424,6 +506,7 @@ static int mv_ddr_sar_freq_get(int dev_num, enum mv_ddr_freq *freq) case 0x6: *freq = MV_DDR_FREQ_600; break; +#endif /* CONFIG_DDR4 */ case 0x11: case 0x14: DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR, @@ -448,21 +531,32 @@ static int mv_ddr_sar_freq_get(int dev_num, enum mv_ddr_freq *freq) case 0x12: *freq = MV_DDR_FREQ_900; break; +#if defined(CONFIG_DDR4) + case 0x13: + *freq = MV_DDR_FREQ_1000; + DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR, + ("Warning: Unsupported freq mode for 1000Mhz configured(%d)\n", + reg)); + break; +#else /* CONFIG_DDR4 */ case 0x13: *freq = MV_DDR_FREQ_933; break; +#endif /* CONFIG_DDR4 */ default: *freq = 0; return MV_NOT_SUPPORTED; } } else { /* REFCLK 40MHz case */ switch (reg) { +#if !defined(CONFIG_DDR4) case 0x3: *freq = MV_DDR_FREQ_400; break; case 0x5: *freq = MV_DDR_FREQ_533; break; +#endif /* CONFIG_DDR4 */ case 0xb: *freq = MV_DDR_FREQ_800; break; @@ -478,6 +572,7 @@ static int mv_ddr_sar_freq_get(int dev_num, enum mv_ddr_freq *freq) return MV_OK; } +#if !defined(CONFIG_DDR4) static int ddr3_tip_a38x_get_medium_freq(int dev_num, enum mv_ddr_freq *freq) { u32 reg, ref_clk_satr; @@ -554,6 +649,7 @@ static int ddr3_tip_a38x_get_medium_freq(int dev_num, enum mv_ddr_freq *freq) return MV_OK; } +#endif /* CONFIG_DDR4 */ static int ddr3_tip_a38x_get_device_info(u8 dev_num, struct ddr3_device_info *info_ptr) { @@ -667,7 +763,9 @@ static int mv_ddr_sw_db_init(u32 dev_num, u32 board_id) dfs_low_freq = DFS_LOW_FREQ_VALUE; calibration_update_control = 1; +#if !defined(CONFIG_DDR4) ddr3_tip_a38x_get_medium_freq(dev_num, &medium_freq); +#endif /* CONFIG_DDR4 */ return MV_OK; } @@ -675,6 +773,29 @@ static int mv_ddr_sw_db_init(u32 dev_num, u32 board_id) static int mv_ddr_training_mask_set(void) { struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); +#if defined(CONFIG_DDR4) + mask_tune_func = (SET_LOW_FREQ_MASK_BIT | + LOAD_PATTERN_MASK_BIT | + SET_TARGET_FREQ_MASK_BIT | + WRITE_LEVELING_TF_MASK_BIT | + READ_LEVELING_TF_MASK_BIT | + RECEIVER_CALIBRATION_MASK_BIT | + WL_PHASE_CORRECTION_MASK_BIT | + DQ_VREF_CALIBRATION_MASK_BIT); + /* Temporarily disable the DQ_MAPPING stage */ + /* DQ_MAPPING_MASK_BIT */ + rl_mid_freq_wa = 0; + + /* In case A382, Vref calibration workaround isn't required */ + if (((reg_read(DEV_ID_REG) & 0xFFFF0000) >> 16) == 0x6811) { + printf("vref_calibration_wa is disabled\n"); + vref_calibration_wa = 0; + } + + if (DDR3_IS_16BIT_DRAM_MODE(tm->bus_act_mask) == 1) + mask_tune_func &= ~WL_PHASE_CORRECTION_MASK_BIT; + +#else /* CONFIG_DDR4 */ enum mv_ddr_freq ddr_freq = tm->interface_params[0].memory_freq; mask_tune_func = (SET_LOW_FREQ_MASK_BIT | @@ -711,6 +832,7 @@ static int mv_ddr_training_mask_set(void) mask_tune_func &= ~PBS_TX_MASK_BIT; mask_tune_func &= ~PBS_RX_MASK_BIT; } +#endif /* CONFIG_DDR4 */ return MV_OK; } @@ -767,6 +889,7 @@ static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id, /* Set KNL values */ switch (frequency) { +#ifndef CONFIG_DDR4 /* CONFIG_DDR3 */ case MV_DDR_FREQ_467: async_val = 0x806f012; break; @@ -776,15 +899,18 @@ static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id, case MV_DDR_FREQ_600: async_val = 0x805f00a; break; +#endif case MV_DDR_FREQ_667: async_val = 0x809f012; break; case MV_DDR_FREQ_800: async_val = 0x807f00a; break; +#ifndef CONFIG_DDR4 /* CONFIG_DDR3 */ case MV_DDR_FREQ_850: async_val = 0x80cb012; break; +#endif case MV_DDR_FREQ_900: async_val = 0x80d7012; break; @@ -1293,6 +1419,12 @@ static int ddr3_new_tip_dlb_config(void) i++; } +#if defined(CONFIG_DDR4) + reg = reg_read(DUNIT_CTRL_HIGH_REG); + reg &= ~(CPU_INTERJECTION_ENA_MASK << CPU_INTERJECTION_ENA_OFFS); + reg |= CPU_INTERJECTION_ENA_SPLIT_DIS << CPU_INTERJECTION_ENA_OFFS; + reg_write(DUNIT_CTRL_HIGH_REG, reg); +#endif /* CONFIG_DDR4 */ /* Enable DLB */ reg = reg_read(DLB_CTRL_REG); @@ -1432,10 +1564,122 @@ int ddr3_tip_configure_phy(u32 dev_num) ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, DDR_PHY_DATA, 0x90, 0x6002)); +#if defined(CONFIG_DDR4) + mv_ddr4_phy_config(dev_num); +#endif /* CONFIG_DDR4 */ return MV_OK; } +#if defined(CONFIG_DDR4) +/* function: ddr4TipCalibrationValidate + * this function validates the calibration values + * the function is per soc due to the different processes the calibration values are different + */ +int mv_ddr4_calibration_validate(u32 dev_num) +{ + int status = MV_OK; + u8 if_id = 0; + u32 read_data[MAX_INTERFACE_NUM]; + u32 cal_n = 0, cal_p = 0; + + /* + * Pad calibration control enable: during training set the calibration to be internal + * at the end of the training it should be fixed to external to be configured by the mc6 + * FIXME: set the calibration to external in the end of the training + */ + + /* pad calibration control enable */ + CHECK_STATUS(ddr3_tip_if_write + (0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, MAIN_PADS_CAL_MACH_CTRL_REG, + DYN_PADS_CAL_ENABLE_ENA << DYN_PADS_CAL_ENABLE_OFFS | + CAL_UPDATE_CTRL_INT << CAL_UPDATE_CTRL_OFFS, + DYN_PADS_CAL_ENABLE_MASK << DYN_PADS_CAL_ENABLE_OFFS | + CAL_UPDATE_CTRL_MASK << CAL_UPDATE_CTRL_OFFS)); + + /* Polling initial calibration is done*/ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, + CAL_MACH_RDY << CAL_MACH_STATUS_OFFS, + CAL_MACH_STATUS_MASK << CAL_MACH_STATUS_OFFS, + MAIN_PADS_CAL_MACH_CTRL_REG, MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("ddr4TipCalibrationAdjust: DDR4 calibration poll failed(0)\n")); + + /* Polling that calibration propagate to io */ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x3FFFFFF, 0x3FFFFFF, PHY_LOCK_STATUS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("ddr4TipCalibrationAdjust: DDR4 calibration poll failed(1)\n")); + + /* TODO - debug why polling not enough*/ + mdelay(10); + + /* pad calibration control disable */ + CHECK_STATUS(ddr3_tip_if_write + (0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, MAIN_PADS_CAL_MACH_CTRL_REG, + DYN_PADS_CAL_ENABLE_DIS << DYN_PADS_CAL_ENABLE_OFFS | + CAL_UPDATE_CTRL_INT << CAL_UPDATE_CTRL_OFFS, + DYN_PADS_CAL_ENABLE_MASK << DYN_PADS_CAL_ENABLE_OFFS | + CAL_UPDATE_CTRL_MASK << CAL_UPDATE_CTRL_OFFS)); + + /* Polling initial calibration is done */ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, + CAL_MACH_RDY << CAL_MACH_STATUS_OFFS, + CAL_MACH_STATUS_MASK << CAL_MACH_STATUS_OFFS, + MAIN_PADS_CAL_MACH_CTRL_REG, MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("ddr4TipCalibrationAdjust: DDR4 calibration poll failed(0)\n")); + + /* Polling that calibration propagate to io */ + if (ddr3_tip_if_polling(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x3FFFFFF, 0x3FFFFFF, PHY_LOCK_STATUS_REG, + MAX_POLLING_ITERATIONS) != MV_OK) + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("ddr4TipCalibrationAdjust: DDR4 calibration poll failed(1)\n")); + + /* TODO - debug why polling not enough */ + mdelay(10); + + /* Read Cal value and set to manual val */ + CHECK_STATUS(ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x1DC8, read_data, MASK_ALL_BITS)); + cal_n = (read_data[if_id] & ((0x3F) << 10)) >> 10; + cal_p = (read_data[if_id] & ((0x3F) << 4)) >> 4; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("ddr4TipCalibrationValidate::DDR4 SSTL calib val - Pcal = 0x%x , Ncal = 0x%x\n", + cal_p, cal_n)); + if ((cal_n >= 56) || (cal_n <= 6) || (cal_p >= 59) || (cal_p <= 7)) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("%s: Error:DDR4 SSTL calib val - Pcal = 0x%x, Ncal = 0x%x are out of range\n", + __func__, cal_p, cal_n)); + status = MV_FAIL; + } + + /* 14C8 - Vertical */ + CHECK_STATUS(ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x14C8, read_data, MASK_ALL_BITS)); + cal_n = (read_data[if_id] & ((0x3F) << 10)) >> 10; + cal_p = (read_data[if_id] & ((0x3F) << 4)) >> 4; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("ddr4TipCalibrationValidate::DDR4 POD-V calib val - Pcal = 0x%x , Ncal = 0x%x\n", + cal_p, cal_n)); + if ((cal_n >= 56) || (cal_n <= 6) || (cal_p >= 59) || (cal_p <= 7)) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("%s: Error:DDR4 POD-V calib val - Pcal = 0x%x , Ncal= 0x%x are out of range\n", + __func__, cal_p, cal_n)); + status = MV_FAIL; + } + + /* 17C8 - Horizontal */ + CHECK_STATUS(ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, 0x17C8, read_data, MASK_ALL_BITS)); + cal_n = (read_data[if_id] & ((0x3F) << 10)) >> 10; + cal_p = (read_data[if_id] & ((0x3F) << 4)) >> 4; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, + ("ddr4TipCalibrationValidate::DDR4 POD-H calib val - Pcal = 0x%x , Ncal = 0x%x\n", + cal_p, cal_n)); + if ((cal_n >= 56) || (cal_n <= 6) || (cal_p >= 59) || (cal_p <= 7)) { + DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, + ("%s: Error:DDR4 POD-H calib val - Pcal = 0x%x, Ncal = 0x%x are out of range\n", + __func__, cal_p, cal_n)); + status = MV_FAIL; + } + + return status; +} +#endif /* CONFIG_DDR4 */ int mv_ddr_manual_cal_do(void) { diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.h b/drivers/ddr/marvell/a38x/mv_ddr_plat.h index 44998847c2..01894f652c 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_plat.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.h @@ -39,8 +39,19 @@ #define TUNE_TRAINING_PARAMS_ODT_CONFIG_1CS 0x10000 #define TUNE_TRAINING_PARAMS_RTT_NOM 0x44 +#if defined(CONFIG_DDR4) +#define TUNE_TRAINING_PARAMS_P_ODT_DATA_DDR4 0x1A +#define TUNE_TRAINING_PARAMS_DIC_DDR4 0x0 +#define TUNE_TRAINING_PARAMS_ODT_CONFIG_DDR4 0 /* 0x330012 */ +#define TUNE_TRAINING_PARAMS_RTT_NOM_DDR4 0 /* 0x400, RZQ/3 = 0x600 */ +#define TUNE_TRAINING_PARAMS_RTT_WR_1CS 0x200 /*RZQ/1 = 0x400*/ +#define TUNE_TRAINING_PARAMS_RTT_WR_2CS 0x200 /*RZQ/1 = 0x400*/ +#define TUNE_TRAINING_PARAMS_RTT_PARK_1CS 0 +#define TUNE_TRAINING_PARAMS_RTT_PARK_2CS 0 +#else /* CONFIG_DDR4 */ #define TUNE_TRAINING_PARAMS_RTT_WR_1CS 0x0 /*off*/ #define TUNE_TRAINING_PARAMS_RTT_WR_2CS 0x0 /*off*/ +#endif /* CONFIG_DDR4 */ #define MARVELL_BOARD MARVELL_BOARD_ID_BASE diff --git a/drivers/ddr/marvell/a38x/mv_ddr_regs.h b/drivers/ddr/marvell/a38x/mv_ddr_regs.h index cf2a6c92e8..a19000dbdd 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_regs.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_regs.h @@ -373,6 +373,65 @@ enum { #define MRS2_CMD 0x8 #define MRS3_CMD 0x9 +#if defined(CONFIG_DDR4) +/* DDR4 MRS */ +#define MRS4_CMD 0x10 +#define MRS5_CMD 0x11 +#define MRS6_CMD 0x12 + +/* DDR4 Registers */ +#define DDR4_MR0_REG 0x1900 +#define DDR4_MR1_REG 0x1904 +#define DDR4_MR2_REG 0x1908 +#define DDR4_MR3_REG 0x190c +#define DDR4_MPR_PS_OFFS 0 +#define DDR4_MPR_PS_MASK 0x3 +enum mv_ddr_mpr_ps { /* DDR4 MPR Page Selection */ + DDR4_MPR_PAGE0, + DDR4_MPR_PAGE1, + DDR4_MPR_PAGE2, + DDR4_MPR_PAGE3 +}; +#define DDR4_MPR_OP_OFFS 2 +#define DDR4_MPR_OP_MASK 0x1 +enum mv_ddr_mpr_op { /* DDR4 MPR Operation */ + DDR4_MPR_OP_DIS, /* normal operation */ + DDR4_MPR_OP_ENA /* dataflow from mpr */ +}; +#define DDR4_MPR_RF_OFFS 11 +#define DDR4_MPR_RF_MASK 0x3 +enum mv_ddr_mpr_rd_frmt { /* DDR4 MPR Read Format */ + DDR4_MPR_RF_SERIAL, + DDR4_MPR_RF_PARALLEL, + DDR4_MPR_RF_STAGGERED, + DDR4_MPR_RF_RSVD_TEMP + +}; + +#define DDR4_MR4_REG 0x1910 +#define DDR4_RPT_OFFS 10 +#define DDR4_RPT_MASK 0x1 +enum { /* read preamble training mode */ + DDR4_RPT_DIS, + DDR4_RPT_ENA +}; + +#define DDR4_MR5_REG 0x1914 +#define DDR4_MR6_REG 0x1918 +#define DDR4_MPR_WR_REG 0x19d0 +#define DDR4_MPR_LOC_OFFS 8 +#define DDR4_MPR_LOC_MASK 0x3 +/* + * MPR Location for MPR write and read accesses + * MPR Location 0..3 within the selected page (page selection in MR3 [1:0] bits) + */ +enum { + DDR4_MPR_LOC0, + DDR4_MPR_LOC1, + DDR4_MPR_LOC2, + DDR4_MPR_LOC3 +}; +#endif /* CONFIG_DDR4 */ #define DRAM_PINS_MUX_REG 0x19d4 #define CTRL_PINS_MUX_OFFS 0 diff --git a/drivers/ddr/marvell/a38x/mv_ddr_topology.h b/drivers/ddr/marvell/a38x/mv_ddr_topology.h index 1cb69ad085..715c1468bc 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_topology.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_topology.h @@ -8,6 +8,77 @@ #define MAX_CS_NUM 4 +#if defined(CONFIG_DDR4) +enum mv_ddr_speed_bin { + SPEED_BIN_DDR_1600J, + SPEED_BIN_DDR_1600K, + SPEED_BIN_DDR_1600L, + SPEED_BIN_DDR_1866L, + SPEED_BIN_DDR_1866M, + SPEED_BIN_DDR_1866N, + SPEED_BIN_DDR_2133N, + SPEED_BIN_DDR_2133P, + SPEED_BIN_DDR_2133R, + SPEED_BIN_DDR_2400P, + SPEED_BIN_DDR_2400R, + SPEED_BIN_DDR_2400T, + SPEED_BIN_DDR_2400U, + SPEED_BIN_DDR_2666T, + SPEED_BIN_DDR_2666U, + SPEED_BIN_DDR_2666V, + SPEED_BIN_DDR_2666W, + SPEED_BIN_DDR_2933V, + SPEED_BIN_DDR_2933W, + SPEED_BIN_DDR_2933Y, + SPEED_BIN_DDR_2933AA, + SPEED_BIN_DDR_3200W, + SPEED_BIN_DDR_3200AA, + SPEED_BIN_DDR_3200AC +}; + +enum mv_ddr_freq { + MV_DDR_FREQ_LOW_FREQ, + MV_DDR_FREQ_650, + MV_DDR_FREQ_667, + MV_DDR_FREQ_800, + MV_DDR_FREQ_933, + MV_DDR_FREQ_1066, + MV_DDR_FREQ_900, + MV_DDR_FREQ_1000, + MV_DDR_FREQ_1050, + MV_DDR_FREQ_1200, + MV_DDR_FREQ_1333, + MV_DDR_FREQ_1466, + MV_DDR_FREQ_1600, + MV_DDR_FREQ_LAST, + MV_DDR_FREQ_SAR +}; + +enum mv_ddr_speed_bin_timing { + SPEED_BIN_TRCD, + SPEED_BIN_TRP, + SPEED_BIN_TRAS, + SPEED_BIN_TRC, + SPEED_BIN_TRRD0_5K, + SPEED_BIN_TRRD1K, + SPEED_BIN_TRRD2K, + SPEED_BIN_TRRDL0_5K, + SPEED_BIN_TRRDL1K, + SPEED_BIN_TRRDL2K, + SPEED_BIN_TPD, + SPEED_BIN_TFAW0_5K, + SPEED_BIN_TFAW1K, + SPEED_BIN_TFAW2K, + SPEED_BIN_TWTR, + SPEED_BIN_TWTRL, + SPEED_BIN_TRTP, + SPEED_BIN_TWR, + SPEED_BIN_TMOD, + SPEED_BIN_TXPDLL, + SPEED_BIN_TXSDLL, + SPEED_BIN_TCCDL +}; +#else /* CONFIG_DDR3 */ enum mv_ddr_speed_bin { SPEED_BIN_DDR_800D, SPEED_BIN_DDR_800E, @@ -74,6 +145,7 @@ enum mv_ddr_speed_bin_timing { SPEED_BIN_TXPDLL, SPEED_BIN_TXSDLL }; +#endif /* CONFIG_DDR4 */ /* ddr bus masks */ #define BUS_MASK_32BIT 0xf |