arm: Remove zmx25 board and ARCH_MX25

This board has not been converted to CONFIG_DM by the deadline.
Remove it.  As this is the last ARCH_MX25 platform, remove those
references as well.

Cc: Matthias Weisser <weisserm@arcor.de>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>

10 files changed, 12 insertions, 73 deletions

diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 06e6b2279f..03471db9e8 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -44,7 +44,7 @@ static unsigned long gpio_ports[] = {
 	[0] = GPIO1_BASE_ADDR,
 	[1] = GPIO2_BASE_ADDR,
 	[2] = GPIO3_BASE_ADDR,
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
+#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \
 		defined(CONFIG_ARCH_IMX8) || defined(CONFIG_IMXRT1050)
@@ -352,7 +352,7 @@ static const struct mxc_gpio_plat mxc_plat[] = {
 	{ 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
 	{ 1, (struct gpio_regs *)GPIO2_BASE_ADDR },
 	{ 2, (struct gpio_regs *)GPIO3_BASE_ADDR },
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
+#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8)
 	{ 3, (struct gpio_regs *)GPIO4_BASE_ADDR },
@@ -376,7 +376,7 @@ U_BOOT_DRVINFOS(mxc_gpios) = {
 	{ "gpio_mxc", &mxc_plat[0] },
 	{ "gpio_mxc", &mxc_plat[1] },
 	{ "gpio_mxc", &mxc_plat[2] },
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
+#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8)
 	{ "gpio_mxc", &mxc_plat[3] },
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index d6e17bfeae..c38f286e61 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -11,7 +11,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <asm/io.h>
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || \
+#if defined(CONFIG_MX27) || \
 	defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #include <asm/arch/imx-regs.h>
 #endif
diff --git a/drivers/mtd/nand/raw/mxc_nand.h b/drivers/mtd/nand/raw/mxc_nand.h
index 09bcb8f028..771f61e249 100644
--- a/drivers/mtd/nand/raw/mxc_nand.h
+++ b/drivers/mtd/nand/raw/mxc_nand.h
@@ -29,11 +29,6 @@
 #define is_mxc_nfc_1()		1
 #define is_mxc_nfc_21()		0
 #define is_mxc_nfc_32()		0
-#elif defined(CONFIG_MX25)
-#define MXC_NFC_V2_1
-#define is_mxc_nfc_1()		0
-#define is_mxc_nfc_21()		1
-#define is_mxc_nfc_32()		0
 #elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #define MXC_NFC_V3
 #define MXC_NFC_V3_2
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 9bb42e5ca9..40a86a3e12 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -521,7 +521,7 @@ static int fec_open(struct eth_device *edev)
 	       &fec->eth->ecntrl);
 #endif
 
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
 	udelay(100);
 
 	/* setup the MII gasket for RMII mode */
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 62b55ef395..1c0d0e5b8f 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -128,7 +128,7 @@ struct ethernet_regs {
 
 	uint32_t res14[7];		/* MBAR_ETH + 0x2E4-2FC */
 
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
 	uint16_t miigsk_cfgr;		/* MBAR_ETH + 0x300 */
 	uint16_t res15[3];		/* MBAR_ETH + 0x302-306 */
 	uint16_t miigsk_enr;		/* MBAR_ETH + 0x308 */
@@ -196,7 +196,7 @@ struct ethernet_regs {
 #define FEC_X_DES_ACTIVE_TDAR		0x01000000
 #define FEC_R_DES_ACTIVE_RDAR		0x01000000
 
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
 /* defines for MIIGSK */
 /* RMII frequency control: 0=50MHz, 1=5MHz */
 #define MIIGSK_CFGR_FRCONT		(1 << 6)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index cbea165b9d..3bb5b02eab 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -645,7 +645,7 @@ config MCFUART
 
 config MXC_UART
 	bool "IMX serial port support"
-	depends on ARCH_MX25 || ARCH_MX31 || MX5 || MX6 || MX7 || IMX8M
+	depends on ARCH_MX31 || MX5 || MX6 || MX7 || IMX8M
 	help
 	  If you have a machine based on a Motorola IMX CPU you
 	  can enable its onboard serial port by enabling this option.
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index d9a79a2031..3c53de165d 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -23,7 +23,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 /* MX35 and older is CSPI */
-#if defined(CONFIG_MX25) || defined(CONFIG_MX31)
+#if defined(CONFIG_MX31)
 #define MXC_CSPI
 struct cspi_regs {
 	u32 rxdata;
@@ -48,17 +48,10 @@ struct cspi_regs {
 #define MXC_CSPICTRL_RXOVF		BIT(6)
 #define MXC_CSPIPERIOD_32KHZ		BIT(15)
 #define MAX_SPI_BYTES			4
-#if defined(CONFIG_MX25)
-#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
-#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
-#define MXC_CSPICTRL_TC			BIT(7)
-#define MXC_CSPICTRL_MAXBITS		0xfff
-#else	/* MX31 */
 #define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 24)
 #define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0x1f) << 8)
 #define MXC_CSPICTRL_TC			BIT(8)
 #define MXC_CSPICTRL_MAXBITS		0x1f
-#endif
 
 #else	/* MX51 and newer is ECSPI */
 #define MXC_ECSPI
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 090548fb19..1fb685e58d 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -67,56 +67,7 @@ static int mxc_set_usbcontrol(int port, unsigned int flags)
 	unsigned int v;
 
 	v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
-#if defined(CONFIG_MX25)
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
-				MX25_OTG_OCPOL_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX25_OTG_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX25_OTG_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX25_OTG_OCPOL_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
-				MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
-				MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT |
-				MX25_H1_IPPUE_UP_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX25_H1_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX25_H1_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX25_H1_OCPOL_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX25_H1_TLL_BIT;
-
-		if (flags & MXC_EHCI_INTERNAL_PHY)
-			v |= MX25_H1_USBTE_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_DOWN)
-			v |= MX25_H1_IPPUE_DOWN_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_UP)
-			v |= MX25_H1_IPPUE_UP_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-#elif defined(CONFIG_MX31)
+#if defined(CONFIG_MX31)
 	switch (port) {
 	case 0:	/* OTG port */
 		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index a2c51083b1..0ffc1b6444 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -20,7 +20,7 @@ config W1_GPIO
 
 config W1_MXC
 	bool "Enable 1-wire controller on i.MX processors"
-	depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5
+	depends on ARCH_MX31 || ARCH_MX5
 	help
 	  Support the one wire controller found in some members of the NXP
 	  i.MX SoC family.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 6fbb5c1b6d..eaa6f16f5c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -24,7 +24,7 @@ config WATCHDOG_AUTOSTART
 
 config WATCHDOG_TIMEOUT_MSECS
 	int "Watchdog timeout in msec"
-	default 128000 if ARCH_MX25 || ARCH_MX31 || ARCH_MX5 || ARCH_MX6
+	default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6
 	default 128000 if ARCH_MX7 || ARCH_VF610
 	default 30000 if ARCH_SOCFPGA
 	default 60000