diff options
| author | Philipp Tomsich <philipp.tomsich@theobroma-systems.com> | 2017-07-28 18:38:42 +0300 |
|---|---|---|
| committer | Philipp Tomsich <philipp.tomsich@theobroma-systems.com> | 2017-08-13 18:12:36 +0300 |
| commit | e9e5d9d29f747d7c14944129ce523d9d5efe9c0b (patch) | |
| tree | 75d941ce9aa5ede4a62474e31918042b99f8dd46 /drivers | |
| parent | b1a16002f269051bfc82c4b6948e6c069928f704 (diff) | |
| download | u-boot-e9e5d9d29f747d7c14944129ce523d9d5efe9c0b.tar.xz | |
dm: timer: normalise SPL and TPL support
To fully support DM timer in SPL and TPL, we need a few things cleaned
up and normalised:
- inclusion of the uclass and drivers should be an all-or-nothing
decision for each stage and under control of $(SPL_TPL_)TIMER
instead of having the two-level configuration with TIMER and
$(SPL_TPL_)TIMER_SUPPORT
- when $(SPL_TPL_)TIMER is enabled, the ARMv8 generic timer code can
not be compiled in
This normalises configuration to $(SPL_TPL_)TIMER and moves the config
options to drivers/timer/Kconfig (and cleans up the collateral damage
to some defconfigs that had SPL_TIMER_SUPPORT enabled).
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Makefile | 3 | ||||
| -rw-r--r-- | drivers/timer/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/timer/Makefile | 2 |
3 files changed, 20 insertions, 3 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index a41444ace1..0e0fdf0208 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/ obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/ obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/ +obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_BUILD @@ -38,7 +39,6 @@ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/ obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/ obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/ -obj-$(CONFIG_SPL_TIMER_SUPPORT) += timer/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ @@ -83,7 +83,6 @@ obj-y += scsi/ obj-y += sound/ obj-y += spmi/ obj-y += sysreset/ -obj-y += timer/ obj-y += tpm/ obj-y += video/ obj-y += watchdog/ diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig index c666303331..ac4832be20 100644 --- a/drivers/timer/Kconfig +++ b/drivers/timer/Kconfig @@ -9,6 +9,24 @@ config TIMER will be used. The timer is usually a 32 bits free-running up counter. There may be no real tick, and no timer interrupt. +config SPL_TIMER + bool "Enable driver model for timer drivers in SPL" + depends on TIMER && SPL + help + Enable support for timer drivers in SPL. These can be used to get + a timer value when in SPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + SPL build. + +config TPL_TIMER + bool "Enable driver model for timer drivers in TPL" + depends on TIMER && TPL + help + Enable support for timer drivers in TPL. These can be used to get + a timer value when in TPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + TPL build. + config TIMER_EARLY bool "Allow timer to be used early in U-Boot" depends on TIMER diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile index ced7bd66bd..d16ea5391e 100644 --- a/drivers/timer/Makefile +++ b/drivers/timer/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_TIMER) += timer-uclass.o +obj-y += timer-uclass.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o |