diff options
| author | Peng Fan <peng.fan@nxp.com> | 2018-03-28 15:54:14 +0300 |
|---|---|---|
| committer | Joe Hershberger <joe.hershberger@ni.com> | 2018-04-13 23:47:38 +0300 |
| commit | fbada4855d97532514a2be55e355f4bb49f81766 (patch) | |
| tree | f0bc403043ba948033b910a29f8b25aa6977610f /drivers | |
| parent | 8b203863560465f4dde981ecaa876e256e211017 (diff) | |
| download | u-boot-fbada4855d97532514a2be55e355f4bb49f81766.tar.xz | |
net: fec: sharing MDIO for two enet controllers
On i.MX6SX, 6UL and 7D, there are two enet controllers each has a
MDIO port. But Some boards share one MDIO port for the two enets. So
introduce a configuration CONFIG_FEC_MXC_MDIO_BASE to indicate
the MDIO port for sharing.
In Kconfig, user needs enable CONFIG_FEC_MXC_SHARE_MDIO first to enter
the CONFIG_FEC_MXC_MDIO_BASE.
To i.MX28, adapt to use the new config
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/net/fec_mxc.c | 8 |
2 files changed, 18 insertions, 3 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 98573cb22a..3a374d8871 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -155,9 +155,20 @@ config ETHOC help This MAC is present in OpenRISC and Xtensa XTFPGA boards. +config FEC_MXC_SHARE_MDIO + bool "Share the MDIO bus for FEC controller" + depends on FEC_MXC + +config FEC_MXC_MDIO_BASE + hex "MDIO base address for the FEC controller" + depends on FEC_MXC_SHARE_MDIO + help + This specifies the MDIO registers base address. It is used when + two FEC controllers share MDIO bus. + config FEC_MXC bool "FEC Ethernet controller" - depends on MX5 || MX6 + depends on MX5 || MX6 || MX7 help This driver supports the 10/100 Fast Ethernet controller for NXP i.MX processors. diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 1f752d75c7..1de72da10b 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -1146,12 +1146,12 @@ int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr) #endif int ret; -#ifdef CONFIG_MX28 +#ifdef CONFIG_FEC_MXC_MDIO_BASE /* * The i.MX28 has two ethernet interfaces, but they are not equal. * Only the first one can access the MDIO bus. */ - base_mii = MXS_ENET0_BASE; + base_mii = CONFIG_FEC_MXC_MDIO_BASE; #else base_mii = addr; #endif @@ -1273,7 +1273,11 @@ static int fecmxc_probe(struct udevice *dev) fec_reg_setup(priv); priv->dev_id = dev->seq; +#ifdef CONFIG_FEC_MXC_MDIO_BASE + bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE, dev->seq); +#else bus = fec_get_miibus((ulong)priv->eth, dev->seq); +#endif if (!bus) { ret = -ENOMEM; goto err_mii; |