Merge branch '2021-02-14-remove-some-boards'

- Remove some boards that are behind on conversions and have had their
  removal acked or suggested by the relevant maintainers.

6 files changed, 3 insertions, 218 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 403602fddf..f79b50fcf5 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -222,7 +222,7 @@ endif
 if SYS_I2C_MXC_I2C1
 config SYS_MXC_I2C1_SPEED
 	int "I2C Channel 1 speed"
-	default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+	default 40000000 if TARGET_LS2080A_EMU
 	default 100000
 	help
 	 MXC I2C Channel 1 speed
@@ -237,7 +237,7 @@ endif
 if SYS_I2C_MXC_I2C2
 config SYS_MXC_I2C2_SPEED
 	int "I2C Channel 2 speed"
-	default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+	default 40000000 if TARGET_LS2080A_EMU
 	default 100000
 	help
 	 MXC I2C Channel 2 speed
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6712b74a89..a19511aaa7 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -53,7 +53,6 @@ obj-$(CONFIG_MVNETA) += mvneta.o
 obj-$(CONFIG_MVPP2) += mvpp2.o
 obj-$(CONFIG_NATSEMI) += natsemi.o
 obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
-obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
 obj-$(CONFIG_NETCONSOLE) += netconsole.o
 obj-$(CONFIG_NS8382X) += ns8382x.o
 obj-$(CONFIG_PCH_GBE) += pch_gbe.o
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
deleted file mode 100644
index d161f0e09c..0000000000
--- a/drivers/net/ax88796.c
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- */
-#include <common.h>
-#include <linux/delay.h>
-#include "ax88796.h"
-
-/*
- * Set 1 bit data
- */
-static void ax88796_bitset(u32 bit)
-{
-	/* DATA1 */
-	if( bit )
-		EEDI_HIGH;
-	else
-		EEDI_LOW;
-
-	EECLK_LOW;
-	udelay(1000);
-	EECLK_HIGH;
-	udelay(1000);
-	EEDI_LOW;
-}
-
-/*
- * Get 1 bit data
- */
-static u8 ax88796_bitget(void)
-{
-	u8 bit;
-
-	EECLK_LOW;
-	udelay(1000);
-	/* DATA */
-	bit = EEDO;
-	EECLK_HIGH;
-	udelay(1000);
-
-	return bit;
-}
-
-/*
- * Send COMMAND to EEPROM
- */
-static void ax88796_eep_cmd(u8 cmd)
-{
-	ax88796_bitset(BIT_DUMMY);
-	switch(cmd){
-		case MAC_EEP_READ:
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			break;
-
-		case MAC_EEP_WRITE:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(1);
-			break;
-
-		case MAC_EEP_ERACE:
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			break;
-
-		case MAC_EEP_EWEN:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(0);
-			break;
-
-		case MAC_EEP_EWDS:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(0);
-			break;
-		default:
-			break;
-	}
-}
-
-static void ax88796_eep_setaddr(u16 addr)
-{
-	int i ;
-
-	for( i = 7 ; i >= 0 ; i-- )
-		ax88796_bitset(addr & (1 << i));
-}
-
-/*
- * Get data from EEPROM
- */
-static u16 ax88796_eep_getdata(void)
-{
-	ushort data = 0;
-	int i;
-
-	ax88796_bitget();	/* DUMMY */
-	for( i = 0 ; i < 16 ; i++ ){
-		data <<= 1;
-		data |= ax88796_bitget();
-	}
-	return data;
-}
-
-static void ax88796_mac_read(u8 *buff)
-{
-	int i ;
-	u16 data;
-	u16 addr = 0;
-
-	for( i = 0 ; i < 3; i++ )
-	{
-		EECS_HIGH;
-		EEDI_LOW;
-		udelay(1000);
-		/* READ COMMAND */
-		ax88796_eep_cmd(MAC_EEP_READ);
-		/* ADDRESS */
-		ax88796_eep_setaddr(addr++);
-		/* GET DATA */
-		data = ax88796_eep_getdata();
-		*buff++ = (uchar)(data & 0xff);
-		*buff++ = (uchar)((data >> 8) & 0xff);
-		EECLK_LOW;
-		EEDI_LOW;
-		EECS_LOW;
-	}
-}
-
-int get_prom(u8* mac_addr, u8* base_addr)
-{
-	u8 prom[32];
-	int i;
-
-	ax88796_mac_read(prom);
-	for (i = 0; i < 6; i++){
-		mac_addr[i] = prom[i];
-	}
-	return 1;
-}
diff --git a/drivers/net/ax88796.h b/drivers/net/ax88796.h
deleted file mode 100644
index 5106066106..0000000000
--- a/drivers/net/ax88796.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * AX88796L(NE2000) support
- *
- * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- */
-
-#ifndef __DRIVERS_AX88796L_H__
-#define __DRIVERS_AX88796L_H__
-
-#define DP_DATA		(0x10 << 1)
-#define START_PG	0x40	/* First page of TX buffer */
-#define START_PG2	0x48
-#define STOP_PG		0x80	/* Last page +1 of RX ring */
-#define TX_PAGES	12
-#define RX_START	(START_PG+TX_PAGES)
-#define RX_END		STOP_PG
-
-#define AX88796L_BASE_ADDRESS	CONFIG_DRIVER_NE2000_BASE
-#define AX88796L_BYTE_ACCESS	0x00001000
-#define AX88796L_OFFSET		0x00000400
-#define AX88796L_ADDRESS_BYTE	AX88796L_BASE_ADDRESS + \
-		AX88796L_BYTE_ACCESS + AX88796L_OFFSET
-#define AX88796L_REG_MEMR	AX88796L_ADDRESS_BYTE + (0x14<<1)
-#define AX88796L_REG_CR		AX88796L_ADDRESS_BYTE + (0x00<<1)
-
-#define AX88796L_CR		(*(vu_short *)(AX88796L_REG_CR))
-#define AX88796L_MEMR		(*(vu_short *)(AX88796L_REG_MEMR))
-
-#define EECS_HIGH		(AX88796L_MEMR |= 0x10)
-#define EECS_LOW		(AX88796L_MEMR &= 0xef)
-#define EECLK_HIGH		(AX88796L_MEMR |= 0x80)
-#define EECLK_LOW		(AX88796L_MEMR &= 0x7f)
-#define EEDI_HIGH		(AX88796L_MEMR |= 0x20)
-#define EEDI_LOW		(AX88796L_MEMR &= 0xdf)
-#define EEDO			((AX88796L_MEMR & 0x40)>>6)
-
-#define PAGE0_SET		(AX88796L_CR &= 0x3f)
-#define PAGE1_SET		(AX88796L_CR = (AX88796L_CR & 0x3f) | 0x40)
-
-#define BIT_DUMMY	0
-#define MAC_EEP_READ	1
-#define MAC_EEP_WRITE	2
-#define MAC_EEP_ERACE	3
-#define MAC_EEP_EWEN	4
-#define MAC_EEP_EWDS	5
-
-/* R7780MP Specific code */
-#if defined(CONFIG_R7780MP)
-#define ISA_OFFSET	0x1400
-#define DP_IN(_b_, _o_, _d_)	(_d_) = \
-	*( (vu_short *) ((_b_) + ((_o_) * 2) + ISA_OFFSET))
-#define DP_OUT(_b_, _o_, _d_) \
-	*((vu_short *)((_b_) + ((_o_) * 2) + ISA_OFFSET)) = (_d_)
-#define DP_IN_DATA(_b_, _d_)	(_d_) = *( (vu_short *) ((_b_) + ISA_OFFSET))
-#define DP_OUT_DATA(_b_, _d_)	*( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
-#else
-/* Please change for your target boards */
-#define ISA_OFFSET	0x0000
-#define DP_IN(_b_, _o_, _d_)	(_d_) = *( (vu_short *)((_b_)+(_o_ )+ISA_OFFSET))
-#define DP_OUT(_b_, _o_, _d_)	*((vu_short *)((_b_)+(_o_)+ISA_OFFSET)) = (_d_)
-#define DP_IN_DATA(_b_, _d_)	(_d_) = *( (vu_short *) ((_b_)+ISA_OFFSET))
-#define DP_OUT_DATA(_b_, _d_)	*( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
-#endif
-
-#endif /* __DRIVERS_AX88796L_H__ */
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index d197dfdc40..520f7f7325 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -18,11 +18,7 @@
 #define ADDR_TO_P2(addr)	((((uintptr_t)(addr) & ~0xe0000000) | 0xa0000000))
 
 /* The ethernet controller needs to use physical addresses */
-#if defined(CONFIG_SH_32BIT)
-#define ADDR_TO_PHY(addr)	((((uintptr_t)(addr) & ~0xe0000000) | 0x40000000))
-#else
 #define ADDR_TO_PHY(addr)	((uintptr_t)(addr) & ~0xe0000000)
-#endif
 #elif defined(CONFIG_ARM)
 #ifndef inl
 #define inl	readl
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9db4cae1df..79ad0a1b34 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -635,7 +635,7 @@ config MCFUART
 
 config MXC_UART
 	bool "IMX serial port support"
-	depends on ARCH_MX25 || ARCH_MX31 || TARGET_APF27 || TARGET_FLEA3 || TARGET_MX35PDK \
+	depends on ARCH_MX25 || ARCH_MX31 || TARGET_APF27 || TARGET_FLEA3 \
 		|| MX5 || MX6 || MX7 || IMX8M
 	help
 	  If you have a machine based on a Motorola IMX CPU you