diff options
author | Tom Rini <trini@konsulko.com> | 2021-02-10 05:42:56 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2021-04-10 14:59:30 +0300 |
commit | a80e03683ba8c343b07e8e48253fe85b43fc50b8 (patch) | |
tree | 4092ae8ed71df03e76ab737d5dce04434a1a4448 /drivers | |
parent | 34af2da9ad6ba940e0a4ad0cffec26488042a34c (diff) | |
download | u-boot-a80e03683ba8c343b07e8e48253fe85b43fc50b8.tar.xz |
drivers: ata: Remove mvsata_ide driver
The mvsata_ide driver was due for DM conversion by v2019.07. As that
has long passed, remove the driver and disable it in the boards which
had enabled it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ata/Kconfig | 6 | ||||
-rw-r--r-- | drivers/ata/Makefile | 1 | ||||
-rw-r--r-- | drivers/ata/mvsata_ide.c | 199 |
3 files changed, 0 insertions, 206 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 3914f996d9..9ff4b8736c 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -83,12 +83,6 @@ config FSL_SATA Enable this driver to support the SATA controller found in some Freescale PowerPC SoCs. -config MVSATA_IDE - bool "Enable Marvell SATA controller driver support via IDE interface" - help - Enable this driver to support the SATA controller found in - some Marvell SoCs, running in IDE compatibility mode using PIO. - config SATA_MV bool "Enable Marvell SATA controller driver support" select AHCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 98fb480700..4811b2f82c 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_SCSI_AHCI) += ahci.o obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o obj-$(CONFIG_FSL_SATA) += fsl_sata.o obj-$(CONFIG_LIBATA) += libata.o -obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o obj-$(CONFIG_SATA) += sata.o obj-$(CONFIG_SATA_CEVA) += sata_ceva.o obj-$(CONFIG_SATA_MV) += sata_mv.o diff --git a/drivers/ata/mvsata_ide.c b/drivers/ata/mvsata_ide.c deleted file mode 100644 index 41f9a91617..0000000000 --- a/drivers/ata/mvsata_ide.c +++ /dev/null @@ -1,199 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> - * - * Written-by: Albert ARIBAUD <albert.u.boot@aribaud.net> - */ - -#include <common.h> -#include <asm/io.h> -#include <linux/delay.h> - -#if defined(CONFIG_ARCH_ORION5X) -#include <asm/arch/orion5x.h> -#elif defined(CONFIG_ARCH_KIRKWOOD) -#include <asm/arch/soc.h> -#elif defined(CONFIG_ARCH_MVEBU) -#include <linux/mbus.h> -#endif - -/* SATA port registers */ -struct mvsata_port_registers { - u32 reserved0[10]; - u32 edma_cmd; - u32 reserved1[181]; - /* offset 0x300 : ATA Interface registers */ - u32 sstatus; - u32 serror; - u32 scontrol; - u32 ltmode; - u32 phymode3; - u32 phymode4; - u32 reserved2[5]; - u32 phymode1; - u32 phymode2; - u32 bist_cr; - u32 bist_dw1; - u32 bist_dw2; - u32 serrorintrmask; -}; - -/* - * Sanity checks: - * - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR. - * - for ide_preinit to make sense, we need at least one of - * CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET; - * - for ide_preinit to be called, we need CONFIG_IDE_PREINIT. - * Fail with an explanation message if these conditions are not met. - * This is particularly important for CONFIG_IDE_PREINIT, because - * its lack would not cause a build error. - */ - -#if !defined(CONFIG_SYS_ATA_BASE_ADDR) -#error CONFIG_SYS_ATA_BASE_ADDR must be defined -#elif !defined(CONFIG_SYS_ATA_IDE0_OFFSET) \ - && !defined(CONFIG_SYS_ATA_IDE1_OFFSET) -#error CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET \ - must be defined -#elif !defined(CONFIG_IDE_PREINIT) -#error CONFIG_IDE_PREINIT must be defined -#endif - -/* - * Masks and values for SControl DETection and Interface Power Management, - * and for SStatus DETection. - */ - -#define MVSATA_EDMA_CMD_ATA_RST 0x00000004 -#define MVSATA_SCONTROL_DET_MASK 0x0000000F -#define MVSATA_SCONTROL_DET_NONE 0x00000000 -#define MVSATA_SCONTROL_DET_INIT 0x00000001 -#define MVSATA_SCONTROL_IPM_MASK 0x00000F00 -#define MVSATA_SCONTROL_IPM_NO_LP_ALLOWED 0x00000300 -#define MVSATA_SCONTROL_MASK \ - (MVSATA_SCONTROL_DET_MASK|MVSATA_SCONTROL_IPM_MASK) -#define MVSATA_PORT_INIT \ - (MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED) -#define MVSATA_PORT_USE \ - (MVSATA_SCONTROL_DET_NONE|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED) -#define MVSATA_SSTATUS_DET_MASK 0x0000000F -#define MVSATA_SSTATUS_DET_DEVCOMM 0x00000003 - -/* - * Status codes to return to client callers. Currently, callers ignore - * exact value and only care for zero or nonzero, so no need to make this - * public, it is only #define'd for clarity. - * If/when standard negative codes are implemented in U-Boot, then these - * #defines should be moved to, or replaced by ones from, the common list - * of status codes. - */ - -#define MVSATA_STATUS_OK 0 -#define MVSATA_STATUS_TIMEOUT -1 - -/* - * Registers for SATA MBUS memory windows - */ - -#define MVSATA_WIN_CONTROL(w) (MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4)) -#define MVSATA_WIN_BASE(w) (MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4)) - -/* - * Initialize SATA memory windows for Armada XP - */ - -#ifdef CONFIG_ARCH_MVEBU -static void mvsata_ide_conf_mbus_windows(void) -{ - const struct mbus_dram_target_info *dram; - int i; - - dram = mvebu_mbus_dram_info(); - - /* Disable windows, Set Size/Base to 0 */ - for (i = 0; i < 4; i++) { - writel(0, MVSATA_WIN_CONTROL(i)); - writel(0, MVSATA_WIN_BASE(i)); - } - - for (i = 0; i < dram->num_cs; i++) { - const struct mbus_dram_window *cs = dram->cs + i; - writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | - (dram->mbus_dram_target_id << 4) | 1, - MVSATA_WIN_CONTROL(i)); - writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i)); - } -} -#endif - -/* - * Initialize one MVSATAHC port: set SControl's IPM to "always active" - * and DET to "reset", then wait for SStatus's DET to become "device and - * comm ok" (or time out after 50 us if no device), then set SControl's - * DET back to "no action". - */ - -static int mvsata_ide_initialize_port(struct mvsata_port_registers *port) -{ - u32 control; - u32 status; - u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */ - - /* Hard reset */ - writel(MVSATA_EDMA_CMD_ATA_RST, &port->edma_cmd); - udelay(25); /* taken from original marvell port */ - writel(0, &port->edma_cmd); - - /* Set control IPM to 3 (no low power) and DET to 1 (initialize) */ - control = readl(&port->scontrol); - control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT; - writel(control, &port->scontrol); - /* Toggle control DET back to 0 (normal operation) */ - control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE; - writel(control, &port->scontrol); - /* wait for status DET to become 3 (device and communication OK) */ - while (--timeleft) { - status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK; - if (status == MVSATA_SSTATUS_DET_DEVCOMM) - break; - udelay(1); - } - /* return success or time-out error depending on time left */ - if (!timeleft) - return MVSATA_STATUS_TIMEOUT; - return MVSATA_STATUS_OK; -} - -/* - * ide_preinit() will be called by ide_init in cmd_ide.c and will - * reset the MVSTATHC ports needed by the board. - */ - -int ide_preinit(void) -{ - int ret = MVSATA_STATUS_TIMEOUT; - int status; - -#ifdef CONFIG_ARCH_MVEBU - mvsata_ide_conf_mbus_windows(); -#endif - - /* Enable ATA port 0 (could be SATA port 0 or 1) if declared */ -#if defined(CONFIG_SYS_ATA_IDE0_OFFSET) - status = mvsata_ide_initialize_port( - (struct mvsata_port_registers *) - (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET)); - if (status == MVSATA_STATUS_OK) - ret = MVSATA_STATUS_OK; -#endif - /* Enable ATA port 1 (could be SATA port 0 or 1) if declared */ -#if defined(CONFIG_SYS_ATA_IDE1_OFFSET) - status = mvsata_ide_initialize_port( - (struct mvsata_port_registers *) - (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET)); - if (status == MVSATA_STATUS_OK) - ret = MVSATA_STATUS_OK; -#endif - /* Return success if at least one port initialization succeeded */ - return ret; -} |