diff options
author | Tom Rini <trini@konsulko.com> | 2016-07-28 15:45:00 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2016-07-28 15:45:00 +0300 |
commit | 4711e7f7af839b41a6d78490257a9e7975494dd3 (patch) | |
tree | 7fb01e8da7cee537ebd1a070c750da7c4cc43482 /drivers | |
parent | fe34b6a4845476208ca7d19a35179e56bebf3877 (diff) | |
parent | 77cbd3a14184c61d55d7fcddd88fa4e96efc9901 (diff) | |
download | u-boot-4711e7f7af839b41a6d78490257a9e7975494dd3.tar.xz |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/fec_mxc.c | 4 | ||||
-rw-r--r-- | drivers/pci/pci.c | 4 | ||||
-rw-r--r-- | drivers/pci/pcie_imx.c | 2 | ||||
-rw-r--r-- | drivers/serial/serial_mxc.c | 8 | ||||
-rw-r--r-- | drivers/usb/host/Kconfig | 16 | ||||
-rw-r--r-- | drivers/usb/host/ehci-mx6.c | 14 | ||||
-rw-r--r-- | drivers/watchdog/imx_watchdog.c | 2 |
7 files changed, 42 insertions, 8 deletions
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 360f8e44d1..e871b3e81b 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -233,6 +233,7 @@ static int miiphy_restart_aneg(struct eth_device *dev) return ret; } +#ifndef CONFIG_FEC_FIXED_SPEED static int miiphy_wait_aneg(struct eth_device *dev) { uint32_t start; @@ -260,6 +261,7 @@ static int miiphy_wait_aneg(struct eth_device *dev) return 0; } +#endif /* CONFIG_FEC_FIXED_SPEED */ #endif static int fec_rx_task_enable(struct fec_priv *fec) @@ -502,6 +504,8 @@ static int fec_open(struct eth_device *edev) } speed = fec->phydev->speed; } +#elif CONFIG_FEC_FIXED_SPEED + speed = CONFIG_FEC_FIXED_SPEED; #else miiphy_wait_aneg(edev); speed = miiphy_speed(edev->name, fec->phy_id); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 4b73a0ff9c..6b36c187b5 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -458,6 +458,10 @@ void pci_init(void) { hose_head = NULL; + /* allow env to disable pci init/enum */ + if (getenv("pcidisable") != NULL) + return; + /* now call board specific pci_init()... */ pci_init_board(); } diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index c14bb0aa82..732d59d711 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -595,7 +595,7 @@ static int imx_pcie_link_up(void) while (!imx6_pcie_link_up()) { udelay(10); count++; - if (count >= 2000) { + if (count >= 4000) { #ifdef CONFIG_PCI_SCAN_SHOW puts("PCI: pcie phy link never came up\n"); #endif diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index 1563bb3665..8545714411 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -76,6 +76,7 @@ #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ #define UFCR_RFDIV_SHF 7 /* Reference freq divider shift */ +#define UFCR_DCEDTE (1<<6) /* DTE mode select */ #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ #define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ #define USR1_RTSS (1<<14) /* RTS pin status */ @@ -269,8 +270,13 @@ int mxc_serial_setbrg(struct udevice *dev, int baudrate) struct mxc_serial_platdata *plat = dev->platdata; struct mxc_uart *const uart = plat->reg; u32 clk = imx_get_uartclk(); + u32 tmp; + + tmp = 4 << UFCR_RFDIV_SHF; + if (plat->use_dte) + tmp |= UFCR_DCEDTE; + writel(tmp, &uart->fcr); - writel(4 << 7, &uart->fcr); /* divide input clock by 2 */ writel(0xf, &uart->bir); writel(clk / (2 * baudrate), &uart->bmr); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5092251ee0..7f94c1f372 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -74,6 +74,22 @@ config USB_EHCI_MX6 ---help--- Enables support for the on-chip EHCI controller on i.MX6 SoCs. +config USB_EHCI_MX7 + bool "Support for i.MX7 on-chip EHCI USB controller" + depends on ARCH_MX7 + default y + ---help--- + Enables support for the on-chip EHCI controller on i.MX7 SoCs. + +if USB_EHCI_MX7 + +config MXC_USB_OTG_HACTIVE + bool "USB Power pin high active" + ---help--- + Set the USB Power pin polarity to be high active (PWR_POL) + +endif + config USB_EHCI_MSM bool "Support for Qualcomm on-chip EHCI USB controller" depends on DM_USB diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 069f116ed2..8352c2bfc5 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -49,7 +49,7 @@ #define USBNC_OFFSET 0x200 #define USBNC_PHYSTATUS_ID_DIG (1 << 4) /* otg_id status */ #define USBNC_PHYCFG2_ACAENB (1 << 4) /* otg_id detection enable */ -#define UCTRL_PM (1 << 9) /* OTG Power Mask */ +#define UCTRL_PWR_POL (1 << 9) /* OTG Polarity of Power Pin */ #define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */ #define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */ @@ -207,12 +207,20 @@ static void usb_power_config(int index) struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + (0x10000 * index) + USBNC_OFFSET); void __iomem *phy_cfg2 = (void __iomem *)(&usbnc->phy_cfg2); + void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl1); /* * Clear the ACAENB to enable usb_otg_id detection, * otherwise it is the ACA detection enabled. */ clrbits_le32(phy_cfg2, USBNC_PHYCFG2_ACAENB); + + /* Set power polarity to high active */ +#ifdef CONFIG_MXC_USB_OTG_HACTIVE + setbits_le32(ctrl, UCTRL_PWR_POL); +#else + clrbits_le32(ctrl, UCTRL_PWR_POL); +#endif } int usb_phy_mode(int port) @@ -250,11 +258,7 @@ static void usb_oc_config(int index) setbits_le32(ctrl, UCTRL_OVER_CUR_POL); #endif -#if defined(CONFIG_MX6) setbits_le32(ctrl, UCTRL_OVER_CUR_DIS); -#elif defined(CONFIG_MX7) - setbits_le32(ctrl, UCTRL_OVER_CUR_DIS | UCTRL_PM); -#endif } /** diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c index f9f817596f..2938d9f1fe 100644 --- a/drivers/watchdog/imx_watchdog.c +++ b/drivers/watchdog/imx_watchdog.c @@ -39,7 +39,7 @@ void hw_watchdog_init(void) } #endif -void reset_cpu(ulong addr) +void __attribute__((weak)) reset_cpu(ulong addr) { struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; |