diff options
author | Tom Rini <trini@konsulko.com> | 2021-07-12 19:42:11 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2021-07-19 04:03:57 +0300 |
commit | 563cae7c46ba9e6835310e1fbe7a4d3a0d996d2b (patch) | |
tree | c6b695f35d84d00eeef7274e846c67e364805931 /include/configs/M54455EVB.h | |
parent | 011e86a8bf8c8dbcb747906969075d500a1fed54 (diff) | |
download | u-boot-563cae7c46ba9e6835310e1fbe7a4d3a0d996d2b.tar.xz |
m68k: Remove M54455EVB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include/configs/M54455EVB.h')
-rw-r--r-- | include/configs/M54455EVB.h | 356 |
1 files changed, 0 insertions, 356 deletions
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h deleted file mode 100644 index f3621d6326..0000000000 --- a/include/configs/M54455EVB.h +++ /dev/null @@ -1,356 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Freescale MCF54455 EVB board. - * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef _M54455EVB_H -#define _M54455EVB_H - -#include <linux/stringify.h> - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_M54455EVB /* M54455EVB board */ - -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) - -#define LDS_BOARD_TEXT board/freescale/m54455evb/sbf_dram_init.o (.text*) - -#undef CONFIG_WATCHDOG - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* Network configuration */ -#ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_HAS_ETH1 -# define CONFIG_ETHPRIME "FEC0" -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 - -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CONFIG_SYS_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CONFIG_SYS_DISCOVER_PHY */ -#endif - -#define CONFIG_HOSTNAME "M54455EVB" -#ifdef CONFIG_SYS_STMICRO_BOOT -/* ST Micro serial flash */ -#define CONFIG_SYS_LOAD_ADDR2 0x40010013 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=0x40010000\0" \ - "sbfhdr=sbfhdr.bin\0" \ - "uboot=u-boot.bin\0" \ - "load=tftp ${loadaddr} ${sbfhdr};" \ - "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ - "upd=run load; run prog\0" \ - "prog=sf probe 0:1 1000000 3;" \ - "sf erase 0 30000;" \ - "sf write ${loadaddr} 0 0x30000;" \ - "save\0" \ - "" -#else -/* Atmel and Intel */ -#ifdef CONFIG_SYS_ATMEL_BOOT -# define CONFIG_SYS_UBOOT_END 0x0403FFFF -#elif defined(CONFIG_SYS_INTEL_BOOT) -# define CONFIG_SYS_UBOOT_END 0x3FFFF -#endif -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=0x40010000\0" \ - "uboot=u-boot.bin\0" \ - "load=tftp ${loadaddr} ${uboot}\0" \ - "upd=run load; run prog\0" \ - "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE) \ - " " __stringify(CONFIG_SYS_UBOOT_END) ";" \ - "era " __stringify(CONFIG_SYS_FLASH_BASE) " " \ - __stringify(CONFIG_SYS_UBOOT_END) ";" \ - "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE) \ - " ${filesize}; save\0" \ - "" -#endif - -/* ATA configuration */ -#define CONFIG_IDE_RESET 1 -#define CONFIG_IDE_PREINIT 1 -#define CONFIG_ATAPI -#undef CONFIG_LBA48 - -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 2 - -#define CONFIG_SYS_ATA_BASE_ADDR 0x90000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ -#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ - -/* Realtime clock */ -#define CONFIG_MCFRTC -#undef RTC_DEBUG -#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) - -/* Timer */ -#define CONFIG_MCFTMR - -/* I2c */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 80000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - -/* DSPI and Serial Flash */ -#define CONFIG_CF_DSPI -#define CONFIG_SYS_SBFHDR_SIZE 0x13 - -/* PCI */ -#ifdef CONFIG_CMD_PCI -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4 - -#define CONFIG_SYS_PCI_MEM_BUS 0xA0000000 -#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_SYS_PCI_IO_BUS 0xB1000000 -#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS -#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 - -#define CONFIG_SYS_PCI_CFG_BUS 0xB0000000 -#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS -#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 -#endif - -/* FPGA - Spartan 2 */ -/* experiment -#define CONFIG_FPGA_COUNT 1 -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_SYS_FPGA_CHECK_CTRLC -*/ - -/* Input, PCI, Flexbus, and VCO */ -#define CONFIG_EXTRA_CLOCK - -#define CONFIG_PRAM 2048 /* 2048 KB */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) - -#define CONFIG_SYS_MBAR 0xFC000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_SDRAM_BASE1 0x48000000 -#define CONFIG_SYS_SDRAM_SIZE 256 /* SDRAM size in MB */ -#define CONFIG_SYS_SDRAM_CFG1 0x65311610 -#define CONFIG_SYS_SDRAM_CFG2 0x59670000 -#define CONFIG_SYS_SDRAM_CTRL 0xEA0B2000 -#define CONFIG_SYS_SDRAM_EMOD 0x40010000 -#define CONFIG_SYS_SDRAM_MODE 0x00010033 -#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0xAA - -#ifdef CONFIG_CF_SBF -# define CONFIG_SERIAL_BOOT -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) -#else -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ - -/* Reserve 256 kB for malloc() */ -#define CONFIG_SYS_MALLOC_LEN (256 << 10) - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -/* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) - -/* - * Configuration for environment - * Environment is not embedded in u-boot. First time runing may have env - * crc error warning if there is no correct environment on the flash. - */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#ifdef CONFIG_SYS_STMICRO_BOOT -# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS1_BASE -#endif -#ifdef CONFIG_SYS_ATMEL_BOOT -# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE -#endif -#ifdef CONFIG_SYS_INTEL_BOOT -# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE -#endif - -#ifdef CONFIG_SYS_FLASH_CFI - -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT -# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -# define CONFIG_SYS_FLASH_CHECKSUM -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } -# define CONFIG_FLASH_CFI_LEGACY - -#ifdef CONFIG_FLASH_CFI_LEGACY -# define CONFIG_SYS_ATMEL_REGION 4 -# define CONFIG_SYS_ATMEL_TOTALSECT 11 -# define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7} -# define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} -#endif -#endif - -/* - * This is setting for JFFS2 support in u-boot. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ -#ifdef CONFIG_CMD_JFFS2 -#ifdef CF_STMICRO_BOOT -# define CONFIG_JFFS2_DEV "nor1" -# define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000) -#endif -#ifdef CONFIG_SYS_ATMEL_BOOT -# define CONFIG_JFFS2_DEV "nor1" -# define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000) -#endif -#ifdef CONFIG_SYS_INTEL_BOOT -# define CONFIG_JFFS2_DEV "nor0" -# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) -# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) -#endif -#endif - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) -#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) -#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ - CF_CACR_ICINVA | CF_CACR_EUSP) -#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ - CF_CACR_DEC | CF_CACR_DDCM_P | \ - CF_CACR_DCINVA) & ~CF_CACR_ICINVA) - -/*----------------------------------------------------------------------- - * Memory bank definitions - */ -/* - * CS0 - NOR Flash 1, 2, 4, or 8MB - * CS1 - CompactFlash and registers - * CS2 - CPLD - * CS3 - FPGA - * CS4 - Available - * CS5 - Available - */ - -#if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT) - /* Atmel Flash */ -#define CONFIG_SYS_CS0_BASE 0x04000000 -#define CONFIG_SYS_CS0_MASK 0x00070001 -#define CONFIG_SYS_CS0_CTRL 0x00001140 -/* Intel Flash */ -#define CONFIG_SYS_CS1_BASE 0x00000000 -#define CONFIG_SYS_CS1_MASK 0x01FF0001 -#define CONFIG_SYS_CS1_CTRL 0x00000D60 - -#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS0_BASE -#else -/* Intel Flash */ -#define CONFIG_SYS_CS0_BASE 0x00000000 -#define CONFIG_SYS_CS0_MASK 0x01FF0001 -#define CONFIG_SYS_CS0_CTRL 0x00000D60 - /* Atmel Flash */ -#define CONFIG_SYS_CS1_BASE 0x04000000 -#define CONFIG_SYS_CS1_MASK 0x00070001 -#define CONFIG_SYS_CS1_CTRL 0x00001140 - -#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS1_BASE -#endif - -/* CPLD */ -#define CONFIG_SYS_CS2_BASE 0x08000000 -#define CONFIG_SYS_CS2_MASK 0x00070001 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -/* FPGA */ -#define CONFIG_SYS_CS3_BASE 0x09000000 -#define CONFIG_SYS_CS3_MASK 0x00070001 -#define CONFIG_SYS_CS3_CTRL 0x00000020 - -#endif /* _M54455EVB_H */ |