diff options
author | Tom Rini <trini@konsulko.com> | 2021-05-22 15:47:07 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2021-07-08 05:22:42 +0300 |
commit | f4a6f75b48c1565b5d1be9a90c3f5a21d588b936 (patch) | |
tree | 9c1f41f6cd88f2cca1cee2c880d7830583cf91ba /include/configs/at91rm9200ek.h | |
parent | 6aa36936161c7e010aeadf1fafd8238db2efde1f (diff) | |
download | u-boot-f4a6f75b48c1565b5d1be9a90c3f5a21d588b936.tar.xz |
arm: Remove at91rm9200ek boards
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM. Remove them.
Cc: Andreas Bießmann <andreas@biessmann.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include/configs/at91rm9200ek.h')
-rw-r--r-- | include/configs/at91rm9200ek.h | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h deleted file mode 100644 index bf6a614348..0000000000 --- a/include/configs/at91rm9200ek.h +++ /dev/null @@ -1,162 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Andreas Bießmann <biessmann.devel@googlemail.com> - * - * based on previous work by - * - * Ulf Samuelsson <ulf@atmel.com> - * Rick Bronson <rick@efn.org> - * - * Configuration settings for the AT91RM9200EK board. - */ - -#ifndef __AT91RM9200EK_CONFIG_H__ -#define __AT91RM9200EK_CONFIG_H__ - -#include <linux/sizes.h> - -/* - * set some initial configurations depending on configure target - * - * at91rm9200ek_config -> boot from 0x0 in NOR Flash at CS0 - * at91rm9200ek_ram_config -> continue booting from 0x20100000 in RAM; lowlevel - * initialisation was done by some preloader - */ -#ifdef CONFIG_RAMBOOT -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* - * AT91C_XTAL_CLOCK is the frequency of external xtal in hertz - * AT91C_MAIN_CLOCK is the frequency of PLLA output - * AT91C_MASTER_CLOCK is the peripherial clock - * CONFIG_SYS_HZ_CLOCK is the value for CCR in tc0 (divider 2 is implicitely - * set in arch/arm/cpu/arm920t/at91/timer.c) - * CONFIG_SYS_HZ is the tick rate for timer tc0 - */ -#define AT91C_XTAL_CLOCK 18432000 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3 ) -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) - -/* CPU configuration */ -#define CONFIG_AT91RM9200 -#define CONFIG_AT91RM9200EK -#define USE_920T_MMU - -#include <asm/hardware.h> /* needed for port definitions */ - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Memory Configuration - */ -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE SZ_32M - -/* - * LowLevel Init - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM1 (CONFIG_SYS_SDRAM_BASE+0x80) -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -/* - * Hardware drivers - */ -/* - * Choose a USART for serial console - * CONFIG_DBGU is DBGU unit on J10 - * CONFIG_USART1 is USART1 on J14 - */ -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0/* ignored in arm */ - -/* - * Network Driver Setting - */ -#define CONFIG_DRIVER_AT91EMAC -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RMII - -/* - * NOR Flash - */ -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE -#define PHYS_FLASH_SIZE SZ_8M -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -/* - * USB Config - */ -#define CONFIG_USB_ATMEL 1 -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW 1 - -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_USB_HOST_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -/* - * Environment Settings - */ - -/* - * after u-boot.bin - */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN SZ_256K - -/* - * Boot option - */ - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_16M - -/* - * Shell Settings - */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + SZ_128K, \ - SZ_4K) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - - GENERATED_GBL_DATA_SIZE) - -#endif /* __AT91RM9200EK_CONFIG_H__ */ |