configs: nx25-ae250:Rename as ax25-ae350

Rename
 nx25 as ax25
 ae250 as ae350
 nx25-ae250 as ax25-ae350
 including filename, variable, string and definition.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>

1 files changed, 124 insertions, 0 deletions

diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
new file mode 100644
index 0000000000..a5948c4333
--- /dev/null
+++ b/include/configs/ax25-ae350.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Andes Technology Corporation
+ * Rick Chen, Andes Technology Corporation <rick@andestech.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * CPU and Board Configuration Options
+ */
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_SERVERIP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
+
+/*
+ * Print Buffer Size
+ */
+#define CONFIG_SYS_PBSIZE	\
+	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/*
+ * max number of command args
+ */
+#define CONFIG_SYS_MAXARGS	16
+
+/*
+ * Boot Argument Buffer Size
+ */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+
+/*
+ * Size of malloc() pool
+ * 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough
+ */
+#define CONFIG_SYS_MALLOC_LEN   (512 << 10)
+
+/* DT blob (fdt) address */
+#define CONFIG_SYS_FDT_BASE		0x000f0000
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2
+#define PHYS_SDRAM_0	0x00000000		/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1	\
+	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)	/* SDRAM Bank #2 */
+#define PHYS_SDRAM_0_SIZE	0x20000000	/* 512 MB */
+#define PHYS_SDRAM_1_SIZE	0x20000000	/* 512 MB */
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_0
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
+#endif
+#define CONFIG_SYS_NS16550_CLK		19660800
+
+/* Init Stack Pointer */
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000000 - \
+					GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Load address and memory test area should agree with
+ * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself.
+ */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* SDRAM */
+
+/*
+ * memtest works on 512 MB in DRAM
+ */
+#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_0
+#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)
+
+/* environments */
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		50000000
+#define CONFIG_ENV_SPI_MODE		0
+#define CONFIG_ENV_SECT_SIZE		0x1000
+#define CONFIG_ENV_OVERWRITE
+
+/* SPI FLASH */
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		1000000
+#define CONFIG_SF_DEFAULT_MODE		0
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+
+/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)
+/* Increase max gunzip size */
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)
+
+/* When we use RAM as ENV */
+#define CONFIG_ENV_SIZE 0x2000
+
+/* Enable distro boot */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+				"kernel_addr_r=0x00080000\0" \
+				"pxefile_addr_r=0x01f00000\0" \
+				"scriptaddr=0x01f00000\0" \
+				"fdt_addr_r=0x02000000\0" \
+				"ramdisk_addr_r=0x02800000\0" \
+				BOOTENV
+
+#endif /* __CONFIG_H */