diff options
| author | Tom Rini <trini@konsulko.com> | 2021-08-18 00:59:45 +0300 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2021-08-30 21:10:06 +0300 |
| commit | 88cd7d0ea961ca11b1eeaaea8b7811573b103abb (patch) | |
| tree | 752b270004b880f8c0bdb8785d900b49384b3216 /include/configs/km | |
| parent | c18afbe0ab4638b421c9eb5c5a89ee451a2ca127 (diff) | |
| download | u-boot-88cd7d0ea961ca11b1eeaaea8b7811573b103abb.tar.xz | |
Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR
based on current usage.
- Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
to Kconfig. We move these symbols around a bit and add appropriate
dependencies to them. In some cases, we now add a correct default value
as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include/configs/km')
| -rw-r--r-- | include/configs/km/km-mpc8309.h | 1 | ||||
| -rw-r--r-- | include/configs/km/km-mpc832x.h | 1 | ||||
| -rw-r--r-- | include/configs/km/km-mpc8360.h | 1 | ||||
| -rw-r--r-- | include/configs/km/km-powerpc.h | 2 | ||||
| -rw-r--r-- | include/configs/km/km_arm.h | 10 |
5 files changed, 2 insertions, 13 deletions
diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h index e710c04493..8ed32b27f6 100644 --- a/include/configs/km/km-mpc8309.h +++ b/include/configs/km/km-mpc8309.h @@ -123,7 +123,6 @@ #define CONFIG_SYS_KMBEC_FPGA_SIZE 128 /* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* ethernet port connected to piggy (UEC2) */ #define CONFIG_HAS_ETH1 diff --git a/include/configs/km/km-mpc832x.h b/include/configs/km/km-mpc832x.h index 22dfb5da67..2955776c75 100644 --- a/include/configs/km/km-mpc832x.h +++ b/include/configs/km/km-mpc832x.h @@ -72,5 +72,4 @@ #define CONFIG_SYS_KMBEC_FPGA_SIZE 128 /* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/km/km-mpc8360.h b/include/configs/km/km-mpc8360.h index 798b126960..92e046d02d 100644 --- a/include/configs/km/km-mpc8360.h +++ b/include/configs/km/km-mpc8360.h @@ -67,7 +67,6 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 /* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* * PAXE on the local bus CS3 diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 3be926c103..95969a0f8f 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -11,8 +11,6 @@ /* EEprom support 24C08, 24C16, 24C64 */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 5f06a8d213..6633bf8256 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -130,11 +130,6 @@ extern void __set_direction(unsigned pin, int high); /* EEprom support 24C128, 24C256 valid for environment eeprom */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 Byte write page */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* * Environment variables configurations @@ -142,7 +137,6 @@ extern void __set_direction(unsigned pin, int high); #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR #define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */ #else -#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 #define CONFIG_SYS_EEPROM_WREN #define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */ #endif @@ -164,9 +158,9 @@ extern void __set_direction(unsigned pin, int high); "newenv=setenv addr 0x100000 && " \ "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; " \ "mw.b ${addr} 0 4 && " \ - "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ + "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \ " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \ - "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ + "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \ " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0" #endif |