diff options
| author | Ye Li <ye.li@nxp.com> | 2018-06-28 06:23:17 +0300 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2018-09-04 09:47:23 +0300 |
| commit | 1a8c01995fa7a5086a51f3cf0d11e54ef07beefe (patch) | |
| tree | 13c43181a5e66417cc59787628323ae41d32625d /include/configs/mx6ul_14x14_evk.h | |
| parent | 25baafc44c460da6f676a550fe477e8040bd575d (diff) | |
| download | u-boot-1a8c01995fa7a5086a51f3cf0d11e54ef07beefe.tar.xz | |
imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
Convert the codes and configurations to enable DM drivers in u-boot for
modules: i2c, PMIC, regulator, USB, Ethernet, SD/MMC, GPIO and QSPI
This patch does not change SPL, so it still uses non-DM driver for
UART, GPIO and SD/MMC.
Signed-off-by: Ye Li <ye.li@nxp.com>
Diffstat (limited to 'include/configs/mx6ul_14x14_evk.h')
| -rw-r--r-- | include/configs/mx6ul_14x14_evk.h | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 3ad2518dce..c8c088e665 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -38,17 +38,14 @@ /* I2C configs */ #ifdef CONFIG_CMD_I2C -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_SPEED 100000 +#endif -/* PMIC only for 9X9 EVK */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE3000 -#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 +#ifdef CONFIG_DM_GPIO +#define CONFIG_DM_74X164 #endif #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 @@ -166,6 +163,7 @@ #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #ifdef CONFIG_FSL_QSPI +#define CONFIG_SYS_FSL_QSPI_AHB #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 40000000 @@ -190,12 +188,13 @@ #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x2 #define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "eth0" #elif (CONFIG_FEC_ENET_DEV == 1) #define IMX_FEC_BASE ENET2_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1 #define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "eth1" #endif -#define CONFIG_ETHPRIME "FEC" #endif #define CONFIG_IMX_THERMAL |