diff options
author | Stefan Roese <sr@denx.de> | 2015-11-18 13:06:09 +0300 |
---|---|---|
committer | Marek Vasut <marex@denx.de> | 2015-12-07 02:15:59 +0300 |
commit | ae9996c806e15b68b97fe7a7242c44e713345269 (patch) | |
tree | e7243daf44bd67b383ef81cbb61e1c14b1bc53bd /include/configs/socfpga_sr1500.h | |
parent | 75507d5d5496a691aecb731f87d4d8d5cdf62b77 (diff) | |
download | u-boot-ae9996c806e15b68b97fe7a7242c44e713345269.tar.xz |
arm: socfpga: Add SoCFPGA SR1500 board
The SR1500 board is a CycloneV based board, similar to the EBV
SoCrates, equipped with the following devices:
- SPI NOR
- eMMC
- Ethernet
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
Diffstat (limited to 'include/configs/socfpga_sr1500.h')
-rw-r--r-- | include/configs/socfpga_sr1500.h | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h new file mode 100644 index 0000000000..bccb235a11 --- /dev/null +++ b/include/configs/socfpga_sr1500.h @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2015 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_SOCFPGA_SR1500_H__ +#define __CONFIG_SOCFPGA_SR1500_H__ + +#include <asm/arch/base_addr_ac5.h> + +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE + +#define CONFIG_HW_WATCHDOG + +/* U-Boot Commands */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MEMTEST +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TIME + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyS0" __stringify(CONFIG_BAUDRATE) +#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" +#define CONFIG_LOADADDR 0x01000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ + +/* Ethernet on SoC (EMAC) */ +#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII +/* The PHY is autodetected, so no MII PHY address is needed here */ +#define CONFIG_PHY_MARVELL +#define PHY_ANEG_TIMEOUT 8000 + +/* Extra Environment */ +#define CONFIG_HOSTNAME sr1500 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "bootimage=zImage\0" \ + "fdt_addr=100\0" \ + "fdtimage=socfpga.dtb\0" \ + "fsloadcmd=ext2load\0" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "mmcroot=/dev/mmcblk0p2\0" \ + "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${mmcroot} rw rootwait;" \ + "bootz ${loadaddr} - ${fdt_addr}\0" \ + "mmcload=mmc rescan;" \ + "load mmc 0:1 ${loadaddr} ${bootimage};" \ + "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ + "qspiroot=/dev/mtdblock0\0" \ + "qspirootfstype=jffs2\0" \ + "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${qspiroot} rw rootfstype=${qspirootfstype};"\ + "bootm ${loadaddr} - ${fdt_addr}\0" + +/* Environment */ +#define CONFIG_ENV_IS_IN_SPI_FLASH + +/* Enable SPI NOR flash reset, needed for SPI booting */ +#define CONFIG_SPI_N25Q256A_RESET + +/* + * Bootcounter + */ +#define CONFIG_BOOTCOUNT_LIMIT +/* last 2 lwords in OCRAM */ +#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8 +#define CONFIG_SYS_BOOTCOUNT_BE + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +/* U-Boot payload is stored at offset 0x60000 */ +#undef CONFIG_SYS_SPI_U_BOOT_OFFS +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x60000 + +/* Environment setting for SPI flash */ +#undef CONFIG_ENV_SIZE +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_OFFSET 0x00040000 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MODE SPI_MODE_3 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +#endif /* __CONFIG_SOCFPGA_SR1500_H__ */ |