Merge tag 'v2021.10-rc4' into next

Prepare v2021.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

# gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	board/Arcturus/ucp1020/spl.c
#	cmd/mvebu/Kconfig
#	common/Kconfig.boot
#	common/image-fit.c
#	configs/UCP1020_defconfig
#	configs/sifive_unmatched_defconfig
#	drivers/pci/Kconfig
#	include/configs/UCP1020.h
#	include/configs/sifive-unmatched.h
#	lib/Makefile
#	scripts/config_whitelist.txt

12 files changed, 48 insertions, 865 deletions

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 2f1fc6a6a2..dd11e9841e 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -251,10 +251,6 @@
 #define CONFIG_SYS_SICRH 0
 #define CONFIG_SYS_SICRL SICRL_LDP_A
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #endif
diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h
index d6a151d20c..2a53b14d0b 100644
--- a/include/configs/MPC8349EMDS_SDRAM.h
+++ b/include/configs/MPC8349EMDS_SDRAM.h
@@ -308,10 +308,6 @@
 #define CONFIG_SYS_SICRH 0
 #define CONFIG_SYS_SICRL SICRL_LDP_A
 
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #endif
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 0e2e034dcd..26c6180d3a 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -238,8 +238,6 @@
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000
 
 #ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #endif	/* CONFIG_PCI */
 
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 66cf2053f9..fc9d94984e 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -26,7 +26,6 @@
 #define CONFIG_HAS_FEC		1	/* 8540 has FEC */
 #endif
 
-#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 /*
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 2243143664..e1e0717991 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -27,7 +27,6 @@
  * assume U-Boot is less than 0.5MB
  */
 
-#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_RESET_PHY_R	1	/* Call reset_phy() */
 
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
deleted file mode 100644
index 22b8c3f4e0..0000000000
--- a/include/configs/UCP1020.h
+++ /dev/null
@@ -1,809 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013-2019 Arcturus Networks, Inc.
- *           https://www.arcturusnetworks.com/products/ucp1020/
- * based on include/configs/p1_p2_rdb_pc.h
- * original copyright follows:
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- */
-
-/*
- * QorIQ uCP1020-xx boards configuration file
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-/*** Arcturus FirmWare Environment */
-
-#define MAX_SERIAL_SIZE 15
-#define MAX_HWADDR_SIZE 17
-
-#define MAX_FWENV_ADDR	4
-
-#define FWENV_MMC	1
-#define FWENV_SPI_FLASH	2
-#define FWENV_NOR_FLASH	3
-/*
- #define FWENV_TYPE    FWENV_MMC
- #define FWENV_TYPE    FWENV_SPI_FLASH
-*/
-#define FWENV_TYPE	FWENV_NOR_FLASH
-
-#if (FWENV_TYPE == FWENV_MMC)
-#define FWENV_ADDR1 -1
-#define FWENV_ADDR2 -1
-#define FWENV_ADDR3 -1
-#define FWENV_ADDR4 -1
-#define EMPY_CHAR 0
-#endif
-
-#if (FWENV_TYPE == FWENV_SPI_FLASH)
-#ifndef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED	1000000
-#endif
-#ifndef CONFIG_SF_DEFAULT_MODE
-#define CONFIG_SF_DEFAULT_MODE	SPI_MODE0
-#endif
-#ifndef CONFIG_SF_DEFAULT_CS
-#define CONFIG_SF_DEFAULT_CS	0
-#endif
-#ifndef CONFIG_SF_DEFAULT_BUS
-#define CONFIG_SF_DEFAULT_BUS	0
-#endif
-#define FWENV_ADDR1 (0x200 - sizeof(smac))
-#define FWENV_ADDR2 (0x400 - sizeof(smac))
-#define FWENV_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
-#define FWENV_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
-#define EMPY_CHAR 0xff
-#endif
-
-#if (FWENV_TYPE == FWENV_NOR_FLASH)
-#define FWENV_ADDR1 0xEC080000
-#define FWENV_ADDR2 -1
-#define FWENV_ADDR3 -1
-#define FWENV_ADDR4 -1
-#define EMPY_CHAR 0xff
-#endif
-/***********************************/
-
-#define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
-#define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
-
-#if defined(CONFIG_TARTGET_UCP1020T1)
-
-#define CONFIG_UCP1020_REV_1_3
-
-#define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC3
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETHADDR		00:19:D3:FF:FF:FF
-#define CONFIG_ETH1ADDR		00:19:D3:FF:FF:FE
-#define CONFIG_ETH2ADDR		00:19:D3:FF:FF:FD
-#define CONFIG_IPADDR		10.80.41.229
-#define CONFIG_SERVERIP		10.80.41.227
-#define CONFIG_NETMASK		255.255.252.0
-#define CONFIG_ETHPRIME		"eTSEC3"
-
-#define CONFIG_SYS_L2_SIZE	(256 << 10)
-
-#endif
-
-#if defined(CONFIG_TARGET_UCP1020)
-
-#define CONFIG_UCP1020
-#define CONFIG_UCP1020_REV_1_3
-
-#define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC3
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETHADDR		00:06:3B:FF:FF:FF
-#define CONFIG_ETH1ADDR		00:06:3B:FF:FF:FE
-#define CONFIG_ETH2ADDR		00:06:3B:FF:FF:FD
-#define CONFIG_IPADDR		192.168.1.81
-#define CONFIG_IPADDR1		192.168.1.82
-#define CONFIG_IPADDR2		192.168.1.83
-#define CONFIG_SERVERIP		192.168.1.80
-#define CONFIG_GATEWAYIP	102.168.1.1
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-#define CONFIG_SYS_L2_SIZE	(256 << 10)
-
-#endif
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
-#endif
-
-#define CONFIG_SYS_TEXT_BASE_NOR	0xeff80000
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_LBA48
-
-#define CONFIG_SYS_CLK_FREQ	66666666
-
-#define CONFIG_HWCONFIG
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE
-#define CONFIG_BTB
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#define CONFIG_SYS_CCSRBAR		0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-
-/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
-       SPL code*/
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-/* DDR Setup */
-#define CONFIG_SYS_SPD_BUS_NUM 1
-
-#define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_512M
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_SYS_SDRAM_SIZE		(1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-
-/* Default settings for DDR3 */
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_CS1_BNDS		0x0040007f
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x80014302
-#define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
-
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8655A608
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_SYS_DDR_CONTROL		0xE70C0000	/* Type = DDR3 & ECC */
-#define CONFIG_SYS_DDR_CONTROL_2	0x04401050
-#define CONFIG_SYS_DDR_TIMING_4		0x00220001
-#define CONFIG_SYS_DDR_TIMING_5		0x03402400
-
-#define CONFIG_SYS_DDR_TIMING_3		0x00020000
-#define CONFIG_SYS_DDR_TIMING_0		0x00330004
-#define CONFIG_SYS_DDR_TIMING_1		0x6f6B4846
-#define CONFIG_SYS_DDR_TIMING_2		0x0FA8C8CF
-#define CONFIG_SYS_DDR_CLK_CTRL		0x03000000
-#define CONFIG_SYS_DDR_MODE_1		0x40461520
-#define CONFIG_SYS_DDR_MODE_2		0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL		0x0C300000
-
-/*
- * Memory map
- *
- * 0x0000_0000 0x7fff_ffff	DDR		Up to 2GB cacheable
- * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1G non-cacheable(PCIe * 2)
- * 0xec00_0000 0xefff_ffff	NOR flash	Up to 64M non-cacheable	CS0/1
- * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 256K cacheable
- *   (early boot only)
- * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
- * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K cacheable
- * 0xffe0_0000 0xffef_ffff	CCSR		1M non-cacheable
- */
-
-/*
- * Local Bus Definitions
- */
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
-#define CONFIG_SYS_FLASH_BASE		0xec000000
-
-#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
-	| BR_PS_16 | BR_V)
-
-#define CONFIG_FLASH_OR_PRELIM		0xfc000ff7
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */
-/* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
-/* Size of used area in RAM */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)/* Reserve 256 kB for Mon */
-
-#define CONFIG_SYS_PMC_BASE	0xff980000
-#define CONFIG_SYS_PMC_BASE_PHYS	CONFIG_SYS_PMC_BASE
-#define CONFIG_PMC_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
-					BR_PS_8 | BR_V)
-#define CONFIG_PMC_OR_PRELIM	(OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
-				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
-				 OR_GPCM_EAD)
-
-#define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
-#define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
-#ifdef CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_BR1_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
-#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR + 0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
-#define CONFIG_SYS_SPD_BUS_NUM		1 /* For rom_loc and flash bank */
-
-#define CONFIG_RTC_DS1337
-#define CONFIG_RTC_DS1337_NOOSC
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-#define CONFIG_SYS_I2C_PCA9557_ADDR	0x18
-#define CONFIG_SYS_I2C_NCT72_ADDR	0x4C
-#define CONFIG_SYS_I2C_IDT6V49205B	0x69
-
-#if defined(CONFIG_PCI)
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-/* controller 2, direct to uli, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_NAME		"PCIe SLOT CON9"
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-
-/* controller 1, Slot 2, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME		"PCIe SLOT CON10"
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-
-#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
-/*
- * Environment
- */
-#if !defined(CONFIG_ENV_FIT_UCBOOT) && defined(CONFIG_RAMBOOT_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#endif
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
- * USB
- */
-#define CONFIG_HAS_FSL_DR_USB
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#endif
-#endif
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-/* Misc Extra Settings */
-#undef CONFIG_WATCHDOG	/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3)
-#else
-#error "UCP1020 module revision is not defined !!!"
-#endif
-
-#define CONFIG_BOOTP_SERVERIP
-
-#define CONFIG_TSEC1_NAME	"eTSEC1"
-#define CONFIG_TSEC2_NAME	"eTSEC2"
-#define CONFIG_TSEC3_NAME	"eTSEC3"
-
-#define TSEC1_PHY_ADDR	4
-#define TSEC2_PHY_ADDR	0
-#define TSEC2_PHY_ADDR_SGMII	0x00
-#define TSEC3_PHY_ADDR	6
-
-#define TSEC1_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX	0
-#define TSEC2_PHYIDX	0
-#define TSEC3_PHYIDX	0
-
-#endif
-
-#define CONFIG_HOSTNAME		"UCP1020"
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */
-
-#if defined(CONFIG_DONGLE)
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run prog_spi_mbrbootcramfs\0"					\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"cramfsfile=image.cramfs\0"						\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashrecovery=tftp $recoveryaddr $cramfsfile; "			\
-	"protect off $nor_recoveryaddr +$filesize; "			\
-	"erase $nor_recoveryaddr +$filesize; "				\
-	"cp.b $recoveryaddr $nor_recoveryaddr $filesize; "		\
-	"protect on $nor_recoveryaddr +$filesize\0 "			\
-"flashuboot=tftp $ubootaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr +$filesize; "			\
-	"erase $nor_ubootaddr +$filesize; "				\
-	"cp.b $ubootaddr $nor_ubootaddr $filesize; "			\
-	"protect on $nor_ubootaddr +$filesize\0 "			\
-"flashworking=tftp $workingaddr $cramfsfile; "				\
-	"protect off $nor_workingaddr +$filesize; "			\
-	"erase $nor_workingaddr +$filesize; "				\
-	"cp.b $workingaddr $nor_workingaddr $filesize; "		\
-	"protect on $nor_workingaddr +$filesize\0 "			\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020d.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"mmbr=uCP1020Quiet.mbr\0"						\
-"mmcpart=0:2\0"								\
-"mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "			\
-	"mmc erase 1 1; "						\
-	"mmc write $loadaddr 1 1\0"					\
-"mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; "		\
-	"mmc erase 0x40 0x400; "					\
-	"mmc write $loadaddr 0x40 0x400\0"				\
-"netdev=eth0\0"								\
-"nor_recoveryaddr=0xEC0A0000\0"						\
-"nor_ubootaddr=0xEFF80000\0"						\
-"nor_workingaddr=0xECFA0000\0"						\
-"norbootrecovery=setenv bootargs $recoverybootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadrecovery; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norbootworking=setenv bootargs $workingbootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadworking; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_recoveryaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_workingaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"prog_spi_mbr=run spi__mbr\0"						\
-"prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0"	\
-"prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; "	\
-	"run spi__cramfs\0"						\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"recoveryaddr=0x02F00000\0"						\
-"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"		\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; "		\
-	"protect off 0xeC000000 +$filesize; "				\
-	"erase 0xEC000000 +$filesize; "					\
-	"cp.b $loadaddr 0xEC000000 $filesize; "				\
-	"cmp.b $loadaddr 0xEC000000 $filesize; "			\
-	"protect on 0xeC000000 +$filesize\0"				\
-"spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; "		\
-	"protect off 0xeFF80000 +$filesize; "				\
-	"erase 0xEFF80000 +$filesize; "					\
-	"cp.b $loadaddr 0xEFF80000 $filesize; "				\
-	"cmp.b $loadaddr 0xEFF80000 $filesize; "			\
-	"protect on 0xeFF80000 +$filesize\0"				\
-"spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; "			\
-	"sf probe 0; sf erase 0x8000 +$filesize; "			\
-	"sf write $loadaddr 0x8000 $filesize\0"				\
-"spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; "		\
-	"protect off 0xec0a0000 +$filesize; "				\
-	"erase 0xeC0A0000 +$filesize; "					\
-	"cp.b $loadaddr 0xeC0A0000 $filesize; "				\
-	"protect on 0xec0a0000 +$filesize\0"				\
-"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "			\
-	"sf probe 1; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "			\
-	"sf probe 0; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootaddr=0x01000000\0"						\
-"ubootfile=u-boot.bin\0"						\
-"ubootd=u-boot4dongle.bin\0"						\
-"upgrade=run flashworking\0"						\
-"usb_phy_type=ulpi\0 "							\
-"workingaddr=0x02F00000\0"						\
-"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
-
-#else
-
-#if defined(CONFIG_UCP1020T1)
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0"	\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"cramfsfile=image.cramfs\0"						\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashrecovery=tftp $recoveryaddr $cramfsfile; "			\
-	"protect off $nor_recoveryaddr +$filesize; "			\
-	"erase $nor_recoveryaddr +$filesize; "				\
-	"cp.b $recoveryaddr $nor_recoveryaddr $filesize; "		\
-	"protect on $nor_recoveryaddr +$filesize\0 "			\
-"flashuboot=tftp $ubootaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr +$filesize; "			\
-	"erase $nor_ubootaddr +$filesize; "				\
-	"cp.b $ubootaddr $nor_ubootaddr $filesize; "			\
-	"protect on $nor_ubootaddr +$filesize\0 "			\
-"flashworking=tftp $workingaddr $cramfsfile; "				\
-	"protect off $nor_workingaddr +$filesize; "			\
-	"erase $nor_workingaddr +$filesize; "				\
-	"cp.b $workingaddr $nor_workingaddr $filesize; "		\
-	"protect on $nor_workingaddr +$filesize\0 "			\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"netdev=eth0\0"								\
-"nor_recoveryaddr=0xEC0A0000\0"						\
-"nor_ubootaddr=0xEFF80000\0"						\
-"nor_workingaddr=0xECFA0000\0"						\
-"norbootrecovery=setenv bootargs $recoverybootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadrecovery; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norbootworking=setenv bootargs $workingbootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadworking; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_recoveryaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_workingaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"othbootargs=quiet\0"							\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"recoveryaddr=0x02F00000\0"						\
-"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"		\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"silent=1\0"								\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootaddr=0x01000000\0"						\
-"ubootfile=u-boot.bin\0"						\
-"upgrade=run flashworking\0"						\
-"workingaddr=0x02F00000\0"						\
-"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
-
-#else /* For Arcturus Modules */
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run norkernel\0"						\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashuboot=tftp $loadaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr0 +$filesize; "			\
-	"erase $nor_ubootaddr0 +$filesize; "				\
-	"cp.b $loadaddr $nor_ubootaddr0 $filesize; "			\
-	"protect on $nor_ubootaddr0 +$filesize; "			\
-	"protect off $nor_ubootaddr1 +$filesize; "			\
-	"erase $nor_ubootaddr1 +$filesize; "				\
-	"cp.b $loadaddr $nor_ubootaddr1 $filesize; "			\
-	"protect on $nor_ubootaddr1 +$filesize\0 "			\
-"format0=protect off $part0base +$part0size; "				\
-	"erase $part0base +$part0size\0"				\
-"format1=protect off $part1base +$part1size; "				\
-	"erase $part1base +$part1size\0"				\
-"format2=protect off $part2base +$part2size; "				\
-	"erase $part2base +$part2size\0"				\
-"format3=protect off $part3base +$part3size; "				\
-	"erase $part3base +$part3size\0"				\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"			\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"netdev=eth0\0"								\
-"nor_ubootaddr0=0xEC000000\0"						\
-"nor_ubootaddr1=0xEFF80000\0"						\
-"norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; "	\
-	"run norkernelload; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norkernelload=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $part0base; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"part0base=0xEC100000\0"						\
-"part0size=0x00700000\0"						\
-"part1base=0xEC800000\0"						\
-"part1size=0x02000000\0"						\
-"part2base=0xEE800000\0"						\
-"part2size=0x00800000\0"						\
-"part3base=0xEF000000\0"						\
-"part3size=0x00F80000\0"						\
-"partENVbase=0xEC080000\0"						\
-"partENVsize=0x00080000\0"						\
-"program0=tftp part0-000000.bin; "					\
-	"protect off $part0base +$filesize; "				\
-	"erase $part0base +$filesize; "					\
-	"cp.b $loadaddr $part0base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part0base $filesize\0"			\
-"program1=tftp part1-000000.bin; "					\
-	"protect off $part1base +$filesize; "				\
-	"erase $part1base +$filesize; "					\
-	"cp.b $loadaddr $part1base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part1base $filesize\0"			\
-"program2=tftp part2-000000.bin; "					\
-	"protect off $part2base +$filesize; "				\
-	"erase $part2base +$filesize; "					\
-	"cp.b $loadaddr $part2base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part2base $filesize\0"			\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	"  console=$consoledev,$baudrate $othbootargs; "		\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "			\
-	"sf probe 0; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; "			\
-	"protect off 0xeC000000 +$filesize; "				\
-	"erase 0xEC000000 +$filesize; "					\
-	"cp.b $loadaddr 0xEC000000 $filesize; "				\
-	"cmp.b $loadaddr 0xEC000000 $filesize; "			\
-	"protect on 0xeC000000 +$filesize\0"				\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootfile=u-boot.bin\0"						\
-"upgrade=run flashuboot\0"						\
-"usb_phy_type=ulpi\0 "							\
-"boot_nfs= "								\
-	"setenv bootargs root=/dev/nfs rw "				\
-	"nfsroot=$serverip:$rootpath "					\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr\0"					\
-"boot_hd = "								\
-	"setenv bootargs root=/dev/$bdev rw rootdelay=30 "		\
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"usb start;"							\
-	"ext2load usb 0:1 $loadaddr /boot/$bootfile;"			\
-	"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"			\
-	"bootm $loadaddr - $fdtaddr\0"					\
-"boot_usb_fat = "							\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"usb start;"							\
-	"fatload usb 0:2 $loadaddr $bootfile;"				\
-	"fatload usb 0:2 $fdtaddr $fdtfile;"				\
-	"fatload usb 0:2 $ramdiskaddr $ramdiskfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0 "			\
-"boot_usb_ext2 = "							\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"usb start;"							\
-	"ext2load usb 0:4 $loadaddr $bootfile;"				\
-	"ext2load usb 0:4 $fdtaddr $fdtfile;"				\
-	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0 "			\
-"boot_nor = "								\
-	"setenv bootargs root=/dev/$jffs2nor rw "			\
-	"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"	\
-	"bootm $norbootaddr - $norfdtaddr\0 "				\
-"boot_ram = "								\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"
-
-#endif
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h
index 16d095584e..99624081c3 100644
--- a/include/configs/am64x_evm.h
+++ b/include/configs/am64x_evm.h
@@ -92,6 +92,34 @@
 		"${bootdir}/${name_fit}\0"				\
 	"partitions=" PARTS_DEFAULT
 
+#define EXTRA_ENV_AM642_BOARD_SETTING_USBMSC				\
+	"args_usb=run finduuid;setenv bootargs console=${console} "	\
+		"${optargs} "						\
+		"root=PARTUUID=${uuid} rw "				\
+		"rootfstype=${mmcrootfstype}\0"				\
+	"init_usb=run args_all args_usb\0"				\
+	"get_fdt_usb=load usb ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"get_overlay_usb="						\
+		"fdt address ${fdtaddr};"				\
+		"fdt resize 0x100000;"					\
+		"for overlay in $name_overlays;"			\
+		"do;"							\
+		"load usb ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "	\
+		"fdt apply ${dtboaddr};"				\
+		"done;\0"						\
+	"get_kern_usb=load usb ${bootpart} ${loadaddr} "		\
+		"${bootdir}/${name_kern}\0"				\
+	"get_fit_usb=load usb ${bootpart} ${addr_fit} "			\
+		"${bootdir}/${name_fit}\0"				\
+	"usbboot=setenv boot usb;"					\
+		"setenv bootpart 0:2;"					\
+		"usb start;"						\
+		"run findfdt;"						\
+		"run init_usb;"						\
+		"run get_kern_usb;"					\
+		"run get_fdt_usb;"					\
+		"run run_kern\0"
+
 #define EXTRA_ENV_DFUARGS \
 	DFU_ALT_INFO_MMC \
 	DFU_ALT_INFO_EMMC \
@@ -104,7 +132,8 @@
 	DEFAULT_MMC_TI_ARGS						\
 	EXTRA_ENV_AM642_BOARD_SETTINGS					\
 	EXTRA_ENV_AM642_BOARD_SETTINGS_MMC				\
-	EXTRA_ENV_DFUARGS
+	EXTRA_ENV_DFUARGS						\
+	EXTRA_ENV_AM642_BOARD_SETTING_USBMSC
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index 18b80ef8ce..10555d1a6c 100644
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -155,9 +155,7 @@
 #define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
 #endif
 
-/* set default dfu_bufsiz to 128KB (sector size of OSPI) */
 #define EXTRA_ENV_DFUARGS \
-	"dfu_bufsiz=0x20000\0" \
 	DFU_ALT_INFO_MMC \
 	DFU_ALT_INFO_EMMC \
 	DFU_ALT_INFO_RAM \
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 65d7dd1430..e460f69a08 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -39,6 +39,15 @@
 #define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
 #endif
 
+#if defined(CONFIG_ARMADA_38X) && !defined(CONFIG_SYS_BAUDRATE_TABLE)
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 300, 600, 1200, 1800, 2400, 4800, \
+					  9600, 19200, 38400, 57600, 115200, \
+					  230400, 460800, 500000, 576000, \
+					  921600, 1000000, 1152000, 1500000, \
+					  2000000, 2500000, 3125000, 4000000, \
+					  5200000 }
+#endif
+
 /* auto boot */
 
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 52a22a9758..b12e3a4028 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -45,9 +45,6 @@
 #endif /* CONFIG_SPL_OS_BOOT */
 #endif /* CONFIG_MTD_RAW_NAND */
 
-#define MEM_LAYOUT_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV
-
 #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
 	"bootcmd_" #devtypel #instance "=" \
 	"setenv mmcdev " #instance "; " \
@@ -83,8 +80,12 @@
 
 #include <config_distro_bootcmd.h>
 
+#include <environment/ti/mmc.h>
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	MEM_LAYOUT_ENV_SETTINGS \
+	DEFAULT_LINUX_BOOT_ENV \
+	DEFAULT_MMC_TI_ARGS \
+	DEFAULT_FIT_TI_ARGS \
 	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
@@ -97,42 +98,6 @@
 	"bootubivol=rootfs\0" \
 	"bootubipart=rootfs\0" \
 	"optargs=\0" \
-	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"${optargs} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-	"ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
-		"mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"run loadbootenv && run importbootenv; " \
-			"run ext4bootenv && run importbootenv; " \
-			"if test -n $uenvcmd; then " \
-				"echo Running uenvcmd ...; " \
-				"run uenvcmd; " \
-			"fi; " \
-		"fi\0" \
-	"loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loaddtb=ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"mmcboot=run mmcbootenv; " \
-		"if run loadimage && run loaddtb; then " \
-			"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \
-			"run mmcargs; " \
-			"if test ${bootfile} = uImage; then " \
-				"bootm ${loadaddr} - ${fdtaddr}; " \
-			"fi; " \
-			"if test ${bootfile} = zImage; then " \
-				"bootz ${loadaddr} - ${fdtaddr}; " \
-			"fi; " \
-		"fi\0" \
 	"nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \
 	"nandrootfstype=ubifs rootwait\0" \
 	"nandargs=setenv bootargs console=${console} " \
diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h
index 538cce414c..f68d7d7676 100644
--- a/include/configs/sifive-unmatched.h
+++ b/include/configs/sifive-unmatched.h
@@ -34,6 +34,8 @@
 
 #define CONFIG_SYS_PCI_64BIT		1	/* enable 64-bit resources */
 
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
+
 /* Environment options */
 
 #ifndef CONFIG_SPL_BUILD
@@ -41,6 +43,7 @@
 	func(NVME, nvme, 0) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
+	func(SCSI, scsi, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 251a6c9d8e..e10d90cdc7 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -253,7 +253,7 @@
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
 # define CONFIG_SPL_ENV_SUPPORT
-# define CONFIG_SPL_HASH_SUPPORT
+# define CONFIG_SPL_HASH
 # define CONFIG_ENV_MAX_ENTRIES	10
 #endif