diff options
| author | Mathew McBride <matt@traverse.com.au> | 2022-01-31 16:04:43 +0300 |
|---|---|---|
| committer | Priyanka Jain <priyanka.jain@nxp.com> | 2022-02-01 12:34:24 +0300 |
| commit | a1d2fd3874f1506776819e723c4925ebcbf524b7 (patch) | |
| tree | 717595bd740a329c7f9bd3c0ed82efa3882db802 /include/configs | |
| parent | dc30009cd39e587edd128f3786cfe5da61aa17e0 (diff) | |
| download | u-boot-a1d2fd3874f1506776819e723c4925ebcbf524b7.tar.xz | |
board: traverse: add initial Ten64 support
The Ten64 is a networking-oriented MiniITX board
using the NXP LS1088A SoC.
This patch provides the bare minimum to support
Ten64 boards under U-Boot for distroboot.
Some related drivers have not yet been submitted
and this basic support lacks some of the
opinionated defaults provided by our firmware
distribution.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/ten64.h | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/include/configs/ten64.h b/include/configs/ten64.h new file mode 100644 index 0000000000..54e65f29f1 --- /dev/null +++ b/include/configs/ten64.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017 NXP + * Copyright 2019-2021 Traverse Technologies + */ + +#ifndef __TEN64_H +#define __TEN64_H + +#include "ls1088a_common.h" + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define COUNTER_FREQUENCY 25000000 /* 25MHz */ + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 + +#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 + +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd" +#define SD_BOOTCOMMAND "run distro_bootcmd" + +#define QSPI_MC_INIT_CMD \ + "sf probe 0:0 && sf read 0x80000000 0x300000 0x200000 &&" \ + "sf read 0x80200000 0x5C0000 0x40000 &&" \ + "fsl_mc start mc 0x80000000 0x80200000 && " \ + "sf read 0x80300000 0x580000 0x40000 && fsl_mc lazyapply DPL 0x80300000\0" +#define SD_MC_INIT_CMD \ + "mmcinfo; fatload mmc 0 0x80000000 mcfirmware/mc_ls1088a.itb; "\ + "fatload mmc 0 0x80200000 dpaa2config/dpc.0x1D-0x0D.dtb; "\ + "fsl_mc start mc 0x80000000 0x80200000\0" + +#define BOOT_TARGET_DEVICES(func) \ + func(NVME, nvme, 0) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, 0) \ + func(PXE, pxe, 0) +#include <config_distro_bootcmd.h> + +#undef CONFIG_EXTRA_ENV_SETTINGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "BOARD=ten64\0" \ + "fdt_addr_r=0x90000000\0" \ + "fdt_high=0xa0000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "load_addr=0xa0000000\0" \ + BOOTENV \ + "load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r && " \ + "fdt resize && fdt boardsetup\0" \ + "bootcmd_recovery=mtd read recovery 0xa0000000; mtd read dpl 0x80100000 && " \ + "fsl_mc apply DPL 0x80100000 && bootm 0xa0000000#ten64\0" + +#endif /* __TEN64_H */ |