m68k: Rename CONFIG_WATCHDOG_TIMEOUT to CONFIG_WATCHDOG_TIMEOUT_MSECS

In practice, it is clear that the usage in m68k of
CONFIG_WATCHDOG_TIMEOUT is setting a value in milliseconds. Rename this
to the existing symbol and move to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>

8 files changed, 0 insertions, 34 deletions

diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 246437a51e..b360238b33 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -15,8 +15,6 @@
  */
 #define CFG_SYS_UART_PORT		(0)
 
-#define CONFIG_WATCHDOG_TIMEOUT		5000
-
 /* I2C */
 
 #ifdef CONFIG_MCFFEC
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 128ef50b47..ed45eccb62 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -20,8 +20,6 @@
 
 #define CFG_SYS_UART_PORT		(0)
 
-#define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
-
 /* I2C */
 #define CFG_SYS_I2C_PINMUX_REG	(gpio->par_qspi)
 #define CFG_SYS_I2C_PINMUX_CLR	~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 847b4c2593..a9339e5052 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -19,8 +19,6 @@
 
 #define CFG_SYS_UART_PORT		(0)
 
-#define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
-
 #undef CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */
 
 /* Configuration for environment
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index 0e9ba4c3ad..42b74aeb9b 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -20,8 +20,6 @@
 
 #define CFG_SYS_UART_PORT		(0)
 
-#define CONFIG_WATCHDOG_TIMEOUT		5000
-
 #ifdef CONFIG_MCFFEC
 #	define CFG_SYS_TX_ETH_BUFFER	8
 #	define CFG_SYS_FEC_BUF_USE_SRAM
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 8f83810f16..72f0c63a1e 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -20,8 +20,6 @@
 
 #define CFG_SYS_UART_PORT		(0)
 
-#define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
-
 /* I2C */
 
 #ifdef CONFIG_MCFFEC
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 43c642edeb..4e8b54e01f 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -22,8 +22,6 @@
 
 #define CFG_SYS_UART_PORT		(0)
 
-#define CONFIG_WATCHDOG_TIMEOUT	3360	/* timeout in ms, max is 3.36 sec */
-
 /* I2C */
 
 #ifdef CONFIG_MCFFEC
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index f5922fc416..62aa99342a 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -70,16 +70,6 @@
 #define CFG_SYS_UART2_ALT3_GPIO
 
 /*
- * Watchdog configuration; Watchdog is disabled for running from RAM
- * and set to highest possible value else. Beware there is no check
- * in the watchdog code to validate the timeout value set here!
- */
-
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_WATCHDOG_TIMEOUT 3355	/* timeout in milliseconds */
-#endif
-
-/*
  * Configuration for environment
  * Environment is located in the last sector of the flash
  */
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 01828ea201..6d6e2fc696 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -43,18 +43,6 @@
 #define CFG_SYS_UART_PORT		(0)
 
 /* ---
- * set "#if 0" to "#if 1" if (Hardware)-WATCHDOG should be enabled & change
- * timeout acc. to your needs
- * #define CONFIG_WATCHDOG_TIMEOUT x , x is timeout in milliseconds, e. g. 10000
- * for 10 sec
- * ---
- */
-
-#if 0
-#define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
-#endif
-
-/* ---
  * CONFIG_MONITOR_IS_IN_RAM defines if u-boot is started from a different
  * bootloader residing in flash ('chainloading'); if you want to use
  * chainloading or want to compile a u-boot binary that can be loaded into