Convert CONFIG_SYS_I2C_EEPROM_CCID et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_I2C_EEPROM_CCID
   CONFIG_SYS_I2C_EEPROM_NXID
   CONFIG_SYS_EEPROM_BUS_NUM

Signed-off-by: Tom Rini <trini@konsulko.com>

27 files changed, 0 insertions, 103 deletions

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 0c710ef886..eb7a835179 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -255,9 +255,6 @@
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_CCID
-
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 7f5eaf88aa..8492a64d43 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -351,10 +351,6 @@ extern unsigned long get_sdram_size(void);
 
 /* I2C EEPROM */
 #if defined(CONFIG_TARGET_P1010RDB_PB)
-#ifdef CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#endif
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
 #define MAX_NUM_PORTS			9 /* for 128Bytes EEPROM */
 #endif
 /* enable read and write access to EEPROM */
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 11a3db5902..925720d234 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -67,10 +67,6 @@
 #define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 /*
  * DDR Setup
  */
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index a5461d7fc6..e0aa2b9598 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -112,10 +112,6 @@
 #define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 /*
  * DDR Setup
  */
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index fc068c94a9..e852fc4cdc 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -82,10 +82,6 @@
 #define CONFIG_SYS_DCSRBAR	0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS	0xf00000000ull
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 /*
  * DDR Setup
  */
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 056e2d1925..68cf13581a 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -77,10 +77,6 @@
 #define CONFIG_SYS_DCSRBAR	0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS	0xf00000000ull
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 /*
  * DDR Setup
  */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 7e65b2b6aa..6ee5ec0962 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -62,10 +62,6 @@
 #define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 /*
  * DDR Setup
  */
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 48fe8288aa..9ad3a12011 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -49,10 +49,6 @@
 #define RTC
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM    0
-
 
 /* Voltage monitor on channel 2*/
 #define I2C_VOL_MONITOR_ADDR           0x40
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index ec688741a0..f418c8ccf7 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -59,10 +59,6 @@
  * I2C
  */
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 /*
  * MMC
  */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index aaf28a346d..d383b6c655 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -246,10 +246,6 @@
 
 /* GPIO */
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 /*
  * I2C bus multiplexer
  */
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index f318eb5860..157f218a8e 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -71,10 +71,6 @@
 
 /* I2C */
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 /* PCIe */
 #define FSL_PCIE_COMPAT			"fsl,ls1021a-pcie"
 
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 5f3e8d5b71..83c74b66d3 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -161,10 +161,6 @@
 
 /* GPIO */
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		1
-
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 8413e68f3a..24422665e8 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -63,10 +63,6 @@
 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 #define I2C_MUX_CH_DEFAULT              0x8
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 /* DisplayPort */
 #define DP_PWD_EN_DEFAULT_MASK          0x8
 
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 49f6cd6be1..4158d15cc0 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -37,10 +37,6 @@
 
 /* SATA */
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
 /*
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index ff5da5d275..4bfe4e3ecd 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -184,12 +184,6 @@
 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_CPLD_FTIM2
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_CPLD_FTIM3
 
-/* EEPROM */
-#ifndef SPL_NO_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-#endif
-
 /*
  * Environment
  */
diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h
index 43717cdd4e..2df5f3f6c0 100644
--- a/include/configs/ls1046afrwy.h
+++ b/include/configs/ls1046afrwy.h
@@ -59,8 +59,6 @@
 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
 
 /* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
 #define I2C_RETIMER_ADDR			0x18
 
 /* I2C bus multiplexer */
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 869bbd7634..1f54e51645 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -54,10 +54,6 @@
 #define CFG_LPUART_EN		0x2
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 /*
  * IFC Definitions
  */
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 382d5c7646..5d329577a6 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -98,8 +98,6 @@
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_CPLD_FTIM3
 
 /* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
 #define I2C_RETIMER_ADDR			0x18
 
 /* PMIC */
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 747ee9d442..2d3351e6b4 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -287,10 +287,6 @@
 #define RTC
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 #ifdef CONFIG_FSL_DSPI
 #if !defined(CONFIG_TFABOOT) && \
 	!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 3e829ea865..d98ed39812 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -198,10 +198,6 @@
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 #ifndef SPL_NO_ENV
 /* Initial environment variables */
 #ifdef CONFIG_TFABOOT
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 6487397f65..d02d7fc588 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -235,10 +235,6 @@
 #define CONFIG_RTC_DS3231               1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #ifdef CONFIG_NXP_ESBC
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 87d07b765c..09484dc609 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -222,10 +222,6 @@
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 #endif
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index d39c0032c4..ed69b85758 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -78,10 +78,6 @@
 #define RTC
 #define CONFIG_SYS_I2C_RTC_ADDR		0x51  /* Channel 3*/
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 /* Qixis */
 #define CONFIG_SYS_I2C_FPGA_ADDR		0x66
 
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index 585aab26bf..4e8a904859 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -13,10 +13,6 @@
 
 /* MAC/PHY configuration */
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	EXTRA_ENV_SETTINGS			\
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index 5c4ea27787..bb9239cc59 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -17,10 +17,6 @@
 #define I2C_EMC2305_CMD		0x40
 #define I2C_EMC2305_PWM		0x80
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	           0
-
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	EXTRA_ENV_SETTINGS			\
diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h
index d1ae403473..b70abb013f 100644
--- a/include/configs/lx2162aqds.h
+++ b/include/configs/lx2162aqds.h
@@ -13,10 +13,6 @@
 /* RTC */
 #define CONFIG_SYS_RTC_BUS_NUM		0
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	EXTRA_ENV_SETTINGS			\
diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h
index 9923f3d9c3..85fab92719 100644
--- a/include/configs/sifive-unmatched.h
+++ b/include/configs/sifive-unmatched.h
@@ -51,6 +51,4 @@
 	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	BOOTENV
 
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-
 #endif /* __SIFIVE_UNMATCHED_H */