WS cleanup: remove SPACE(s) followed by TAB

Signed-off-by: Wolfgang Denk <wd@denx.de>

9 files changed, 19 insertions, 19 deletions

diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
index 3dabc3f770..32d1401770 100644
--- a/include/linux/apm_bios.h
+++ b/include/linux/apm_bios.h
@@ -34,7 +34,7 @@ struct apm_bios_info {
 #define APM_16_BIT_SUPPORT	0x0001
 #define APM_32_BIT_SUPPORT	0x0002
 #define APM_IDLE_SLOWS_CLOCK	0x0004
-#define APM_BIOS_DISABLED      	0x0008
+#define APM_BIOS_DISABLED	0x0008
 #define APM_BIOS_DISENGAGED     0x0010
 
 /*
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 98dd3fc4cc..09cea0e95e 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -203,7 +203,7 @@ void __read_once_size(const volatile void *p, void *res, int size)
 /*
  * We can't declare function 'inline' because __no_sanitize_address confilcts
  * with inlining. Attempt to inline it may cause a build failure.
- * 	https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
+ *	https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
  * '__maybe_unused' allows us to avoid defined-but-not-used warnings.
  */
 # define __no_kasan_or_inline __no_sanitize_address notrace __maybe_unused
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 7129504e05..85288c3729 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -63,7 +63,7 @@ struct resource_list {
 #define IORESOURCE_IRQ_HIGHLEVEL	(1<<2)
 #define IORESOURCE_IRQ_LOWLEVEL		(1<<3)
 #define IORESOURCE_IRQ_SHAREABLE	(1<<4)
-#define IORESOURCE_IRQ_OPTIONAL 	(1<<5)
+#define IORESOURCE_IRQ_OPTIONAL		(1<<5)
 
 /* PnP DMA specific bits (IORESOURCE_BITS) */
 #define IORESOURCE_DMA_TYPE_MASK	(3<<0)
diff --git a/include/linux/list.h b/include/linux/list.h
index f62afa092c..3eacf68e3a 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -456,7 +456,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * Continue to iterate over list of given type, continuing after
  * the current position.
  */
-#define list_for_each_entry_continue(pos, head, member) 		\
+#define list_for_each_entry_continue(pos, head, member)			\
 	for (pos = list_entry(pos->member.next, typeof(*pos), member);	\
 	     prefetch(pos->member.next), &pos->member != (head);	\
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
@@ -510,7 +510,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * Iterate over list of given type, continuing after current point,
  * safe against removal of list entry.
  */
-#define list_for_each_entry_safe_continue(pos, n, head, member) 		\
+#define list_for_each_entry_safe_continue(pos, n, head, member)			\
 	for (pos = list_entry(pos->member.next, typeof(*pos), member),		\
 		n = list_entry(pos->member.next, typeof(*pos), member);		\
 	     &pos->member != (head);						\
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index d57f8da810..a72cb7d20b 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -54,7 +54,7 @@
 #define DoC_Mplus_Configuration		0x100a
 #define DoC_Mplus_OutputControl		0x100c
 #define DoC_Mplus_FlashControl		0x1020
-#define DoC_Mplus_FlashSelect 		0x1022
+#define DoC_Mplus_FlashSelect		0x1022
 #define DoC_Mplus_FlashCmd		0x1024
 #define DoC_Mplus_FlashAddress		0x1026
 #define DoC_Mplus_FlashData0		0x1028
@@ -62,14 +62,14 @@
 #define DoC_Mplus_ReadPipeInit		0x102a
 #define DoC_Mplus_LastDataRead		0x102c
 #define DoC_Mplus_LastDataRead1		0x102d
-#define DoC_Mplus_WritePipeTerm 	0x102e
+#define DoC_Mplus_WritePipeTerm		0x102e
 #define DoC_Mplus_ECCSyndrome0		0x1040
 #define DoC_Mplus_ECCSyndrome1		0x1041
 #define DoC_Mplus_ECCSyndrome2		0x1042
 #define DoC_Mplus_ECCSyndrome3		0x1043
 #define DoC_Mplus_ECCSyndrome4		0x1044
 #define DoC_Mplus_ECCSyndrome5		0x1045
-#define DoC_Mplus_ECCConf 		0x1046
+#define DoC_Mplus_ECCConf		0x1046
 #define DoC_Mplus_Toggle		0x1046
 #define DoC_Mplus_DownloadStatus	0x1074
 #define DoC_Mplus_CtrlConfirm		0x1076
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 3822237f2a..0f5a233266 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -21,16 +21,16 @@
  * For each partition, these fields are available:
  * name: string that will be used to label the partition's MTD device.
  * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
- * 	will extend to the end of the master MTD device.
+ *	will extend to the end of the master MTD device.
  * offset: absolute starting position within the master MTD device; if
- * 	defined as MTDPART_OFS_APPEND, the partition will start where the
+ *	defined as MTDPART_OFS_APPEND, the partition will start where the
  *	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
  *	if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
  *	after the end of partition.
  * mask_flags: contains flags that have to be masked (removed) from the
- * 	master MTD flag set for the corresponding MTD partition.
- * 	For example, to force a read-only partition, simply adding
- * 	MTD_WRITEABLE to the mask_flags will do the trick.
+ *	master MTD flag set for the corresponding MTD partition.
+ *	For example, to force a read-only partition, simply adding
+ *	MTD_WRITEABLE to the mask_flags will do the trick.
  *
  * Note: writeable partitions require their size and offset be
  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index 899fbb487c..46e7fff899 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -47,7 +47,7 @@ struct screen_info {
 } __attribute__((packed));
 
 #define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
-#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
+#define VIDEO_TYPE_CGA		0x11	/* CGA Display			*/
 #define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
 #define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
 #define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
@@ -74,7 +74,7 @@ extern struct screen_info screen_info;
 #define ORIG_X			(screen_info.orig_x)
 #define ORIG_Y			(screen_info.orig_y)
 #define ORIG_VIDEO_MODE		(screen_info.orig_video_mode)
-#define ORIG_VIDEO_COLS 	(screen_info.orig_video_cols)
+#define ORIG_VIDEO_COLS		(screen_info.orig_video_cols)
 #define ORIG_VIDEO_EGA_BX	(screen_info.orig_video_ega_bx)
 #define ORIG_VIDEO_LINES	(screen_info.orig_video_lines)
 #define ORIG_VIDEO_ISVGA	(screen_info.orig_video_isVGA)
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 20ea54397f..061371773c 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -257,7 +257,7 @@
  */
 #define UART_ASR	0x01	/* Additional Status Register */
 #define UART_RFL	0x03	/* Receiver FIFO level */
-#define UART_TFL 	0x04	/* Transmitter FIFO level */
+#define UART_TFL	0x04	/* Transmitter FIFO level */
 #define UART_ICR	0x05	/* Index Control Register */
 
 /* The 16950 ICR registers */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 7e6d329e54..b3f4b8d134 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -160,14 +160,14 @@ struct usb_ep_caps {
  *	endpoint. It's set once by UDC driver when endpoint is initialized, and
  *	should not be changed. Should not be confused with maxpacket.
  * @max_streams: The maximum number of streams supported
- * 	by this EP (0 - 16, actual number is 2^n)
+ *	by this EP (0 - 16, actual number is 2^n)
  * @maxburst: the maximum number of bursts supported by this EP (for usb3)
  * @driver_data:for use by the gadget driver.  all other fields are
  *	read-only to gadget drivers.
  * @desc: endpoint descriptor.  This pointer is set before the endpoint is
- * 	enabled and remains valid until the endpoint is disabled.
+ *	enabled and remains valid until the endpoint is disabled.
  * @comp_desc: In case of SuperSpeed support, this is the endpoint companion
- * 	descriptor that is used to configure the endpoint
+ *	descriptor that is used to configure the endpoint
  *
  * the bus controller driver lists all the general purpose endpoints in
  * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,