global: Remove unused or unnecessary CONFIG symbols related to DDR

These symbols are now either unused or were only used within the config
file to determine other logic, which could be done in a way that doesn't
further pollute the CONFIG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>

6 files changed, 0 insertions, 91 deletions

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index d5af4e8166..9e487b8da2 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -38,23 +38,9 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-/*
- * 32-bit data path mode.
- *
- * Please note that using this mode for devices with the real density of 64-bit
- * effectively reduces the amount of available memory due to the effect of
- * wrapping around while translating address to row/columns, for example in the
- * 256MB module the upper 128MB get aliased with contents of the lower
- * 128MB); normally this define should be used for devices with real 32-bit
- * data path.
- */
-#undef CONFIG_DDR_32BIT
-
 #define CONFIG_SYS_SDRAM_BASE	0x00000000	/* DDR is system memory*/
 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
 					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#undef  CONFIG_DDR_2T_TIMING
-
 /*
  * DDRCDR - DDR Control Driver Register
  */
@@ -70,21 +56,6 @@
  * Manually set up DDR parameters
  */
 #define CONFIG_SYS_DDR_SIZE		256		/* MB */
-#if defined(CONFIG_DDR_II)
-#define CONFIG_SYS_DDRCDR		0x80080001
-#define CONFIG_SYS_DDR_CS2_BNDS		0x0000000f
-#define CONFIG_SYS_DDR_CS2_CONFIG	0x80330102
-#define CONFIG_SYS_DDR_TIMING_0		0x00220802
-#define CONFIG_SYS_DDR_TIMING_1		0x38357322
-#define CONFIG_SYS_DDR_TIMING_2		0x2f9048c8
-#define CONFIG_SYS_DDR_TIMING_3		0x00000000
-#define CONFIG_SYS_DDR_CLK_CNTL		0x02000000
-#define CONFIG_SYS_DDR_MODE		0x47d00432
-#define CONFIG_SYS_DDR_MODE2		0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL		0x03cf0080
-#define CONFIG_SYS_DDR_SDRAM_CFG	0x43000000
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
-#else
 #define CONFIG_SYS_DDR_CS2_CONFIG	(CSCONFIG_EN \
 				| CSCONFIG_ROW_BIT_13 \
 				| CSCONFIG_COL_BIT_10)
@@ -93,17 +64,10 @@
 #define CONFIG_SYS_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
 #define CONFIG_SYS_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
 
-#if defined(CONFIG_DDR_32BIT)
-/* set burst length to 8 for 32-bit data path */
-				/* DLL,normal,seq,4/2.5, 8 burst len */
-#define CONFIG_SYS_DDR_MODE	0x00000023
-#else
 /* the default burst length is 4 - for 64-bit data path */
 				/* DLL,normal,seq,4/2.5, 4 burst len */
 #define CONFIG_SYS_DDR_MODE	0x00000022
 #endif
-#endif
-#endif
 
 /*
  * SDRAM on the Local Bus
diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h
index ac12b22e64..e652309da5 100644
--- a/include/configs/MPC8349EMDS_SDRAM.h
+++ b/include/configs/MPC8349EMDS_SDRAM.h
@@ -38,23 +38,9 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-/*
- * 32-bit data path mode.
- *
- * Please note that using this mode for devices with the real density of 64-bit
- * effectively reduces the amount of available memory due to the effect of
- * wrapping around while translating address to row/columns, for example in the
- * 256MB module the upper 128MB get aliased with contents of the lower
- * 128MB); normally this define should be used for devices with real 32-bit
- * data path.
- */
-#undef CONFIG_DDR_32BIT
-
 #define CONFIG_SYS_SDRAM_BASE	0x00000000	/* DDR is system memory*/
 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
 					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#undef  CONFIG_DDR_2T_TIMING
-
 /*
  * DDRCDR - DDR Control Driver Register
  */
@@ -70,21 +56,6 @@
  * Manually set up DDR parameters
  */
 #define CONFIG_SYS_DDR_SIZE		256		/* MB */
-#if defined(CONFIG_DDR_II)
-#define CONFIG_SYS_DDRCDR		0x80080001
-#define CONFIG_SYS_DDR_CS2_BNDS		0x0000000f
-#define CONFIG_SYS_DDR_CS2_CONFIG	0x80330102
-#define CONFIG_SYS_DDR_TIMING_0		0x00220802
-#define CONFIG_SYS_DDR_TIMING_1		0x38357322
-#define CONFIG_SYS_DDR_TIMING_2		0x2f9048c8
-#define CONFIG_SYS_DDR_TIMING_3		0x00000000
-#define CONFIG_SYS_DDR_CLK_CNTL		0x02000000
-#define CONFIG_SYS_DDR_MODE		0x47d00432
-#define CONFIG_SYS_DDR_MODE2		0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL		0x03cf0080
-#define CONFIG_SYS_DDR_SDRAM_CFG	0x43000000
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
-#else
 #define CONFIG_SYS_DDR_CS2_CONFIG	(CSCONFIG_EN \
 				| CSCONFIG_ROW_BIT_13 \
 				| CSCONFIG_COL_BIT_10)
@@ -93,17 +64,10 @@
 #define CONFIG_SYS_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
 #define CONFIG_SYS_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
 
-#if defined(CONFIG_DDR_32BIT)
-/* set burst length to 8 for 32-bit data path */
-				/* DLL,normal,seq,4/2.5, 8 burst len */
-#define CONFIG_SYS_DDR_MODE	0x00000023
-#else
 /* the default burst length is 4 - for 64-bit data path */
 				/* DLL,normal,seq,4/2.5, 4 burst len */
 #define CONFIG_SYS_DDR_MODE	0x00000022
 #endif
-#endif
-#endif
 
 /*
  * SDRAM on the Local Bus
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 1d2389a1c6..5d5efd0967 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -113,17 +113,9 @@
 				| (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 				/* 0x06090100 */
 
-#if defined(CONFIG_DDR_2T_TIMING)
-#define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SREN \
-					| SDRAM_CFG_SDRAM_TYPE_DDR2 \
-					| SDRAM_CFG_32_BE \
-					| SDRAM_CFG_2T_EN)
-					/* 0x43088000 */
-#else
 #define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SREN \
 					| SDRAM_CFG_SDRAM_TYPE_DDR2)
 					/* 0x43000000 */
-#endif
 #define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
 #define CONFIG_SYS_DDR_MODE		((0x0406 << SDRAM_MODE_ESD_SHIFT) \
 					| (0x0442 << SDRAM_MODE_SD_SHIFT))
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
index 86bfc746d8..a3caee4254 100644
--- a/include/configs/UCP1020.h
+++ b/include/configs/UCP1020.h
@@ -171,11 +171,6 @@
 #endif
 
 /* DDR Setup */
-#define CONFIG_DDR_ECC_ENABLE
-#ifndef CONFIG_DDR_ECC_ENABLE
-#define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_DDR_SPD
-#endif
 #define CONFIG_SYS_SPD_BUS_NUM 1
 
 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_512M
@@ -204,11 +199,7 @@
 #define CONFIG_SYS_DDR_SR_CNTR		0x00000000
 #define CONFIG_SYS_DDR_RCW_1		0x00000000
 #define CONFIG_SYS_DDR_RCW_2		0x00000000
-#ifdef CONFIG_DDR_ECC_ENABLE
 #define CONFIG_SYS_DDR_CONTROL		0xE70C0000	/* Type = DDR3 & ECC */
-#else
-#define CONFIG_SYS_DDR_CONTROL		0xC70C0000	/* Type = DDR3 */
-#endif
 #define CONFIG_SYS_DDR_CONTROL_2	0x04401050
 #define CONFIG_SYS_DDR_TIMING_4		0x00220001
 #define CONFIG_SYS_DDR_TIMING_5		0x03402400
diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h
index 05bb51f545..45db5cf873 100644
--- a/include/configs/km/km-mpc83xx.h
+++ b/include/configs/km/km-mpc83xx.h
@@ -18,7 +18,6 @@
 /*
  * Manually set up DDR parameters
  */
-#define CONFIG_DDR_II
 #define CONFIG_SYS_DDR_SIZE		2048 /* MB */
 
 /*
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 131f614782..bca5b6af92 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -72,7 +72,6 @@
 /* I2C addresses of SPD EEPROMs */
 #define SPD_EEPROM_ADDRESS	0x50	/* CTLR 0 DIMM 0 */
 
-#define CONFIG_DDR_DEFAULT_CL	30		/* CAS latency 3	*/
 
 /* Hardcoded values, to use instead of SPD */
 #define CONFIG_SYS_DDR_CS0_BNDS		0x0000000f