Convert CONFIG_HWCONFIG to Kconfig

This converts the following to Kconfig:
   CONFIG_HWCONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>

27 files changed, 0 insertions, 37 deletions

diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 717320c34a..2796adbdcd 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -14,8 +14,6 @@
  * High Level Configuration Options
  */
 
-#define CONFIG_HWCONFIG
-
 /*
  * On-board devices
  */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index e41b8e0843..75ac269570 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -122,8 +122,6 @@
 #define CFG_SYS_FLASH_BANKS_LIST \
 	{CFG_SYS_FLASH_BASE_PHYS + 0x800000, CFG_SYS_FLASH_BASE_PHYS}
 
-#define CONFIG_HWCONFIG			/* enable hwconfig */
-
 /*
  * SDRAM on the Local Bus
  */
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index a8af0a101c..0a1b932e94 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -96,7 +96,6 @@
 #endif
 #endif
 
-#define CONFIG_HWCONFIG
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 1e02855fef..acbd43419f 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -132,8 +132,6 @@
 
 #define CFG_SYS_FLASH_BANKS_LIST	{CFG_SYS_FLASH_BASE_PHYS + 0x8000000}
 
-#define CONFIG_HWCONFIG
-
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
 #define CFG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index b5fb0a9b52..e394237daf 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -270,8 +270,6 @@
 #define CFG_SYS_CS1_FTIM3		CFG_SYS_NAND_FTIM3
 #endif
 
-#define CONFIG_HWCONFIG
-
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
 #define CFG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index bee4b704a2..f681a21822 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -248,8 +248,6 @@
 #define CFG_SYS_CS1_FTIM3		CFG_SYS_NAND_FTIM3
 #endif
 
-#define CONFIG_HWCONFIG
-
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
 #define CFG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index be8c30db26..a93e05dd4d 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -246,8 +246,6 @@
 #define CFG_SYS_CS2_FTIM3		CFG_SYS_NAND_FTIM3
 #endif
 
-#define CONFIG_HWCONFIG
-
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
 #define CFG_SYS_INIT_RAM_ADDR	0xfdd00000 /* Initial L1 address */
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 795873f423..cf65a0da18 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -211,8 +211,6 @@
 #define CFG_SYS_CS1_FTIM3		CFG_SYS_NAND_FTIM3
 #endif
 
-#define CONFIG_HWCONFIG
-
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
 #define CFG_SYS_INIT_RAM_ADDR	0xfdd00000 /* Initial L1 address */
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index ffd5645493..b51762264a 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -70,8 +70,6 @@
 #define CFG_SYS_FLASH_BASE	0xe0000000
 #define CFG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CFG_SYS_FLASH_BASE)
 
-#define CONFIG_HWCONFIG
-
 /* define to use L1 as initial stack */
 #define CONFIG_L1_INIT_RAM
 #define CFG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 578277fc75..a818a4b39f 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -137,7 +137,6 @@
  * Linux Information
  */
 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
-#define CONFIG_HWCONFIG		/* enable hwconfig */
 
 #define DEFAULT_LINUX_BOOT_ENV \
 	"loadaddr=0xc0700000\0" \
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 65283afd2a..6c5ca0a520 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -45,7 +45,6 @@
 #define CONFIG_IMX_VIDEO_SKIP
 
 /* Miscellaneous configurable options */
-#define CONFIG_HWCONFIG
 
 /* Memory configuration */
 
diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h
index 6ccb4f07e3..bbd2b36c45 100644
--- a/include/configs/km/pg-wcom-ls102xa.h
+++ b/include/configs/km/pg-wcom-ls102xa.h
@@ -166,7 +166,6 @@
 
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
 
 /*
diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h
index e152714b11..89c5a24ee9 100644
--- a/include/configs/kmcent2.h
+++ b/include/configs/kmcent2.h
@@ -309,8 +309,6 @@
 #define CFG_SYS_CS2_FTIM2	SYS_QRIO_FTIM2
 #define CFG_SYS_CS2_FTIM3	SYS_QRIO_FTIM3
 
-#define CONFIG_HWCONFIG
-
 /* define to use L1 as initial stack */
 #define CFG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
 #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf
diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
index 2664982715..abe470fe89 100644
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@@ -48,7 +48,6 @@
  * Linux Information
  */
 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
-#define CONFIG_HWCONFIG		/* enable hwconfig */
 #define CONFIG_SETUP_INITRD_TAG
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootenvfile=uEnv.txt\0" \
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 7598e54ed2..9e4f949016 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -24,7 +24,6 @@
 
 #define CFG_SYS_NS16550_CLK          (get_serial_clock())
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
 #define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 3063635592..a968014980 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -92,7 +92,6 @@
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
 
 #define CONFIG_EXTRA_ENV_SETTINGS	\
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 137d459c29..34d4c2fdec 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -276,7 +276,6 @@
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
 
 #ifdef CONFIG_LPUART
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 052a15658d..a5b7364435 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -67,7 +67,6 @@
 /* PCIe */
 #define FSL_PCIE_COMPAT			"fsl,ls1021a-pcie"
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
 
 #define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index f39c7c0884..059941e713 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -157,7 +157,6 @@
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
 
 #define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index bdd3951e85..b190bfe9c8 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -34,7 +34,6 @@
 
 /* Physical Memory Map */
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
 #define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index b4048744b1..a3fa92d1ff 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -110,7 +110,6 @@
 
 /* Miscellaneous configurable options */
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
 #ifndef SPL_NO_MISC
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index cac30e4679..4ed5481c3e 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -74,7 +74,6 @@
 
 /* Miscellaneous configurable options */
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
 #define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index bacc84f629..57429d4bbe 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -114,7 +114,6 @@ unsigned long long get_qixis_addr(void);
 
 /* Physical Memory Map */
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
 #ifndef SPL_NO_ENV
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 18defd5e5a..e82456fd81 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -107,7 +107,6 @@ unsigned long long get_qixis_addr(void);
 /* Physical Memory Map */
 /* fixme: these need to be checked against the board */
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
 /* Initial environment variables */
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index bbee9df404..ff85d966e6 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -84,7 +84,6 @@
 
 #define COUNTER_FREQUENCY_REAL		(get_board_sys_clk() / 4)
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
 /* Initial environment variables */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index e8b752785b..eda2d43d0c 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -112,7 +112,6 @@
 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
-#define CONFIG_HWCONFIG
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index aa9cae017d..d1b20da24a 100644
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -33,8 +33,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CFG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CFG_SYS_SDRAM_BASE		CFG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_HWCONFIG
-
 #define CFG_SYS_INIT_RAM_ADDR		0x00100000
 #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0x0
 #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW	0x00100000