arm: Remove unused mx27 code

We no longer have any i.MX27 platforms, remove the remaining support
code.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 134 deletions

diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
deleted file mode 100644
index b0abd54882..0000000000
--- a/include/configs/imx27lite-common.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
- *
- * based on:
- * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- */
-
-#ifndef __IMX27LITE_COMMON_CONFIG_H
-#define __IMX27LITE_COMMON_CONFIG_H
-
-/*
- * SoC Configuration
- */
-#define CONFIG_MX27
-#define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
-
-/*
- * Lowlevel configuration
- */
-#define SDRAM_ESDCFG_REGISTER_VAL(cas)	\
-		(ESDCFG_TRC(10) |	\
-		ESDCFG_TRCD(3) |	\
-		ESDCFG_TCAS(cas) |	\
-		ESDCFG_TRRD(1) |	\
-		ESDCFG_TRAS(5) |	\
-		ESDCFG_TWR |		\
-		ESDCFG_TMRD(2) |	\
-		ESDCFG_TRP(2) |		\
-		ESDCFG_TXP(3))
-
-#define SDRAM_ESDCTL_REGISTER_VAL	\
-		(ESDCTL_PRCT(0) |	\
-		 ESDCTL_BL |		\
-		 ESDCTL_PWDT(0) |	\
-		 ESDCTL_SREFR(3) |	\
-		 ESDCTL_DSIZ_32 |	\
-		 ESDCTL_COL10 |		\
-		 ESDCTL_ROW13 |		\
-		 ESDCTL_SDE)
-
-#define SDRAM_ALL_VAL		0xf00
-
-#define SDRAM_MODE_REGISTER_VAL	0x33	/* BL: 8, CAS: 3 */
-#define SDRAM_EXT_MODE_REGISTER_VAL	0x1000000
-
-#define MPCTL0_VAL	0x1ef15d5
-
-#define SPCTL0_VAL	0x043a1c09
-
-#define CSCR_VAL	0x33f08107
-
-#define PCDR0_VAL	0x120470c3
-#define PCDR1_VAL	0x03030303
-#define PCCR0_VAL	0xffffffff
-#define PCCR1_VAL	0xfffffffc
-
-#define AIPI1_PSR0_VAL	0x20040304
-#define AIPI1_PSR1_VAL	0xdffbfcfb
-#define AIPI2_PSR0_VAL	0x07ffc200
-#define AIPI2_PSR1_VAL	0xffffffff
-
-/*
- * Memory Info
- */
-/* memtest start address */
-#define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
-#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_MXC_UART_BASE	UART_BASE_ADDR(1)
-
-/*
- * Flash & Environment
- */
-/* Use buffered writes (~10x faster) */
-/* Use hardware sector protection */
-/* CS2 Base address */
-#define PHYS_FLASH_1			0xc0000000
-/* Flash Base for U-Boot */
-#define CFG_SYS_FLASH_BASE		PHYS_FLASH_1
-/* Address and size of Redundant Environment Sector	*/
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC_PHYADDR		0x1f
-
-/*
- * MTD
- */
-
-/*
- * NAND
- */
-#define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
-#define CFG_SYS_NAND_BASE		0xd8000000
-#define CONFIG_MXC_NAND_HWECC
-
-/*
- * U-Boot general configuration
- */
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc0,${baudrate}\0"			\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addmisc=setenv bootargs ${bootargs}\0"				\
-	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
-	"kernel_addr_r=a0800000\0"					\
-	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
-	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm\0"						\
-	"bootcmd=run net_nfs\0"						\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)	\
-		" +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
-		" +${filesize};cp.b ${fileaddr} "			\
-		__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"	\
-	"upd=run load update\0"						\
-
-/* additions for new relocation code, must be added to all boards */
-#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#endif /* __IMX27LITE_COMMON_CONFIG_H */